brake light MAZDA MODEL 2 2019 Owners Manual (in English)
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2019, Model line: MODEL 2, Model: MAZDA MODEL 2 2019Pages: 759, PDF Size: 13.38 MB
Page 137 of 759
▼ 6 D I H W \ & K D L Q V
6 D I H W \ F K D L Q V P X V W E H X V H G D V D S U H F D X W L R Q D U \ P H D V X U H V K R X O G W K H W U D L O H U E H F R P H
X Q L Q W H Q W L R Q D O O \ X Q K L W F K H G 7 K H \ V K R X O G F U R V V X Q G H U W K H W U D L O H U W R Q J X H D Q G D W W D F K W R W K H K L W F K
/ H D Y H H Q R X J K V O D F N W R D O O R Z I X O O W X U Q V & R Q V X O W O L W H U D W X U H S X E O L V K H G E \ \ R X U W U D L O H U R U K L W F K
P D Q X I D F W X U H U I R U P R U H G H W D L O V
: $ 5 1 , 1 *
Make sure the safety chain is securely attached to both the trailer and the vehicle prior to
departure:
Towing a trailer without using a safety chain securely attached to both the trailer and the
vehicle is dangerous. If damage occurs to the coupling unit or hitch ball, the trailer could
wander into another lane and cause a collision.
▼ 7 U D L O H U / L J K W V
& $ 8 7 , 2 1
Do not connect a trailer lighting system directly to the lighting system of your Mazda. This
may damage your vehicle's electrical system and lighting systems. To connect the lighting
system, consult an expert repairer (we recommend an Authorised Mazda Repairer).
▼ 7 U D L O H U % U D N H V
& K H F N W K H 0 D [ L P X P W U D L O H U W R Z L Q J O R D G W D E O H L Q : H L J K W / L P L W V S D J H D Q G L I \ R X U
W U D L O H U Z H L J K W H [ F H H G V W K H Y D O X H L Q W K H 7 2 7 $ / 7 5 $ , / ( 5 : ( , * + 7 7 U D L O H U Z L W K R X W E U D N H
W U D L O H U E U D N H V D U H U H T X L U H G
, I \ R X U W U D L O H U K D V E U D N H V P D N H V X U H W K H \ P H H W U H J X O D W L R Q V
: $ 5 1 , 1 *
Do not connect a hydraulic trailer-brake system to your vehicle's brake system:
Connecting a hydraulic trailer-brake system directly to the vehicle brake system is dangerous
and will result in inadequate braking and possible injury.
% H I R U H ' U L Y L Q J
7 R Z L Q J
Page 144 of 759
, J Q L W L R Q 6 Z L W F K
▼ 3 X V K % X W W R Q 6 W D U W 3 R V L W L R Q V
7 K H V \ V W H P R S H U D W H V R Q O \ Z K H Q W K H G U L Y H U
L V L Q W K H Y H K L F O H R U Z L W K L Q R S H U D W L R Q D O
U D Q J H Z K L O H W K H N H \ L V E H L Q J F D U U L H G
( D F K W L P H W K H S X V K E X W W R Q V W D U W L V S U H V V H G
W K H L J Q L W L R Q V Z L W F K H V L Q W K H R U G H U R I R I I
$ & & D Q G 2 1 3 U H V V L Q J W K H S X V K E X W W R Q
V W D U W D J D L Q I U R P 2 1 V Z L W F K H V W K H L J Q L W L R Q
R I I
Push button startIndicator light
NOTE
xThe engine starts by pressing the push
button start while depressing the clutch
pedal (manual transaxle) or the brake
pedal (automatic transaxle). To switch
the ignition position, press the push
button start without depressing the
pedal.
xDo not leave the ignition switched ON
while the engine is not running. Doing
so could result in the battery going
dead. If the ignition is left in ACC (For
automatic transaxle, the selector lever is
in the P position, and the ignition is in
ACC), the ignition switches off
automatically after about 25 minutes.
2 I I
7 K H S R Z H U V X S S O \ W R H O H F W U L F D O G H Y L F H V
W X U Q V R I I D Q G W K H S X V K E X W W R Q V W D U W
L Q G L F D W R U O L J K W D P E H U D O V R W X U Q V R I I
, Q W K L V S R V L W L R Q W K H V W H H U L Q J Z K H H O L V
O R F N H G
: $ 5 1 , 1 *
Before leaving the driver's seat, always
switch the ignition
off, set the parking
brake, and make sure the selector lever is in
P (automatic transaxle) or in 1st gear or R
(manual transaxle):
Leaving the driver's seat without switching
the ignition off, setting the parking brake,
and shifting the selector lever to P
(automatic transaxle) or to 1st gear or R
(manual transaxle) is dangerous.
Unexpected vehicle movement could occur
which could result in an accident.
In addition, if your intention is to leave the
vehicle for even a short period, it is
important to switch the ignition off, as
leaving it in another position will disable
some of the vehicle's security systems and
run the battery down.
NOTE
(Locked steering wheel)
If the push button start indicator light
(green) is flashing and the beep sound is
heard, this indicates that the steering
wheel is not unlocked. To unlock the
steering wheel, press the push button start
while moving the steering wheel left and
right.
: K H Q ' U L Y L Q J
6 W D U W 6 W R S ( Q J L Q H
Page 146 of 759
xAfter starting a cold engine, the engine
speed increases and a whining sound
from the engine compartment can be
heard.
This is for improved exhaust gas
purification and does not indicate any
parts defect.
0 D N H V X U H \ R X D U H F D U U \ L Q J W K H N H \
2 F F X S D Q W V V K R X O G I D V W H Q W K H L U V H D W
E H O W V
0 D N H V X U H W K H S D U N L Q J E U D N H L V R Q
& R Q W L Q X H W R S U H V V W K H E U D N H S H G D O
I L U P O \ X Q W L O W K H H Q J L Q H K D V F R P S O H W H O \
V W D U W H G
0 D Q X D O W U D Q V D [ O H
& R Q W L Q X H W R S U H V V W K H F O X W F K S H G D O
I L U P O \ X Q W L O W K H H Q J L Q H K D V F R P S O H W H O \
V W D U W H G
$ X W R P D W L F W U D Q V D [ O H
3 X W W K H Y H K L F O H L Q S D U N 3 , I \ R X P X V W
U H V W D U W W K H H Q J L Q H Z K L O H W K H Y H K L F O H L V
P R Y L Q J V K L I W L Q W R Q H X W U D O 1
NOTE
(Manual transaxle)
The starter will not operate if the
clutch pedal is not depressed
sufficiently.
(Automatic transaxle)
The starter will not operate if the
selector lever is not in P or N and the
brake pedal is not depressed
sufficiently.
9 H U L I \ W K D W W K H . ( < L Q G L F D W R U O L J K W
J U H H Q L Q W K H L Q V W U X P H Q W F O X V W H U D Q G
W K H S X V K E X W W R Q V W D U W L Q G L F D W R U O L J K W
J U H H Q L O O X P L Q D W H
Indicator light
Push button start
NOTE
xIf the push button start indicator
light (green) flashes, make sure that
the key is being carried.
xIf the push button start indicator
light (green) flashes with the key
being carried, touch the key to the
push button start and start the
engine. Refer to Engine Start
Function When Key Battery is Dead
on page 4-9.
: K H Q ' U L Y L Q J
6 W D U W 6 W R S ( Q J L Q H
Page 147 of 759
& $ 8 7 , 2 1
If the KEY warning light (red)
illuminates, or the push button start
indicator light (amber) flashes, this
could indicate a problem with the
engine starting system. This may
prevent the engine from starting or
from switching the ignition to ACC or
ON. Have your vehicle inspected at an
expert repairer (we recommend an
Authorised Mazda Repairer) as soon as
possible.
NOTE
xUnder the following conditions, the
KEY warning light (red) flashes after
the push button start is pressed. This
informs the driver that the push
button start will not switch to ACC
even if it is pressed from off.
xThe key battery is dead.
xThe key is out of operational
range.
xThe key is placed in areas where it
is difficult for the system to detect
the signal (page 3-7).
xA key from another manufacturer
similar to the key is in the
operational range.
x(Forced engine starting method)
If the KEY warning light (red)
illuminates, or the push button start
indicator light (amber) flashes, this
could indicate that the engine may
not start using the usual starting
method. Have your vehicle inspected
at an expert repairer (we recommend
an Authorised Mazda Repairer) as
soon as possible. If this occurs, the
engine can be force-started. Press
and hold the push button start until
the engine starts. Other procedures
necessary for starting the engine,
such as having the key in the cabin,
and depressing the clutch pedal
(manual transaxle) or the brake
pedal (automatic transaxle) are
required.
xWhen the engine is force-started, the
KEY warning light (red) remains
illuminated and the push button start
indicator light (amber) remains
flashing.
x(Automatic transaxle)
When the selector lever is in the
neutral (N) position, the KEY
indicator light (green) and the push
button start indicator light (green)
do not illuminate.
3 U H V V W K H S X V K E X W W R Q V W D U W D I W H U E R W K
W K H . ( < L Q G L F D W R U O L J K W J U H H Q L Q W K H
L Q V W U X P H Q W F O X V W H U D Q G W K H S X V K E X W W R Q
V W D U W L Q G L F D W R U O L J K W J U H H Q L O O X P L Q D W H
NOTE
xAfter starting the engine, the push
button start indicator light (amber)
turns off and the ignition switches to
the ON position.
: K H Q ' U L Y L Q J
6 W D U W 6 W R S ( Q J L Q H
Page 148 of 759
x(SKYACTIV-G 1.3, SKYACTIV-G
1.5)
After pressing the push button start
and before the engine starts, the
operation sound of the fuel pump
motor from near the fuel tank can be
heard, however, this does not
indicate a malfunction.
x(SKYACTIV-D 1.5)
xWhen starting the engine, do not
release the brake pedal until the
glow indicator light in the
instrument cluster turns off and
the engine starts, after pressing
the push button start.
xIf the brake pedal is released
before the engine starts, depress
the brake pedal again and press
the push button start to start the
engine.
xIf the ignition is left switched ON
for a long period of time without
the engine running after the glow
plugs are warmed up, the glow
plugs may warm up again which
will illuminate the glow indicator
light.
xThe starter does not rotate until
the glow indicator light turns off.
$ I W H U V W D U W L Q J W K H H Q J L Q H O H W L W L G O H I R U
D E R X W W H Q V H F R Q G V 3 U R K L E L W H G L Q
* H U P D Q \
NOTE
x(Germany)
Drive immediately after starting the
engine. However do not use high
engine speeds until reaching the
operating temperature.
x(SKYACTIV-G 1.3, SKYACTIV-G
1.5)
xWhether the engine is cold or
warm, it should be started without
the use of the accelerator.
xIf the engine does not start the first
time, refer to Starting a Flooded
Engine under Emergency Starting.
If the engine still does not start,
have your vehicle inspected by an
Authorised Mazda Repairer (page
7-26).
x(SKYACTIV-D 1.5)
If the ambient temperature is lower
than about
>+ 10 °C (14 °F), the
maximum engine speed may not be
attained for about three minutes
after the engine starts to protect the
engine.
x(Manual transaxle vehicle with
i-stop function)
If the engine has stopped due to
stalling, it can be restarted by
depressing the clutch pedal within 3
seconds of the engine stopping.
The engine cannot be restarted even
if the clutch pedal is depressed under
the following conditions:
xThe driver's door is open.
: K H Q ' U L Y L Q J
6 W D U W 6 W R S ( Q J L Q H
Page 150 of 759
NOTE
xThe engine cannot be started unless
the clutch pedal is fully depressed
(manual transaxle) or the brake
pedal is fully depressed (automatic
transaxle).
xIf there is a malfunction with the
push button start function, the push
button start indicator light (amber)
flashes. In this case, the engine may
start, however, have the vehicle
checked at an expert repairer (we
recommend an Authorised Mazda
Repairer) as soon as possible.
xIf the push button start indicator
light (green) does not illuminate,
perform the operation from the
beginning again. If it does not
illuminate, have the vehicle checked
at an expert repairer (we recommend
an Authorised Mazda Repairer).
xTo switch the ignition position
without starting the engine, perform
the following operations after the
push button start indicator light
(green) turns on.
1. Release the clutch pedal (manual
transaxle) or brake pedal
(automatic transaxle).
2. Press the push button start to
switch the ignition position. The
ignition switches in the order of
ACC, ON, and off each time the
push button start is pressed. To
switch the ignition position
again, perform the operation
from the beginning.
▼ ( P H U J H Q F \ 2 S H U D W L R Q I R U 6 W D U W L Q J
W K H ( Q J L Q H
, I W K H . ( < Z D U Q L Q J O L J K W U H G L O O X P L Q D W H V
R U W K H S X V K E X W W R Q V W D U W L Q G L F D W R U O L J K W
D P E H U I O D V K H V W K L V F R X O G L Q G L F D W H W K D W
W K H H Q J L Q H P D \ Q R W V W D U W X V L Q J W K H X V X D O
V W D U W L Q J P H W K R G + D Y H \ R X U Y H K L F O H
L Q V S H F W H G D W D Q H [ S H U W U H S D L U H U Z H
U H F R P P H Q G D Q $ X W K R U L V H G 0 D ] G D
5 H S D L U H U D V V R R Q D V S R V V L E O H , I W K L V
R F F X U V W K H H Q J L Q H F D Q E H I R U F H V W D U W H G
3 U H V V D Q G K R O G W K H S X V K E X W W R Q V W D U W X Q W L O
W K H H Q J L Q H V W D U W V 2 W K H U S U R F H G X U H V
Q H F H V V D U \ I R U V W D U W L Q J W K H H Q J L Q H V X F K D V
K D Y L Q J W K H N H \ L Q W K H F D E L Q D Q G
G H S U H V V L Q J W K H F O X W F K S H G D O P D Q X D O
W U D Q V D [ O H R U W K H E U D N H S H G D O D X W R P D W L F
W U D Q V D [ O H D U H U H T X L U H G
: K H Q ' U L Y L Q J
6 W D U W 6 W R S ( Q J L Q H
Page 156 of 759
Engine restarts automatically while engine idling is stopped
Under the following conditions, the engine restarts automatically.
xThe i-stop OFF switch is pressed until the beep sounds.
xThe air conditioner is operated with the airflow mode dial in the position.
x(Automatic air-conditioning)
xThe temperature setting dial of the air conditioner is set to the maximum heating/
maximum cooling (A/C ON).
xThe cabin temperature is largely different from the set temperature of the air
conditioner.
xThe brakes are released slightly on a slope and the vehicle begins to move.
xTwo minutes have elapsed since the idling was stopped.
xThe battery power is depleted.
x(Manual transaxle (With M Hybrid))
xThe shift lever is shifted to the R position.
xThe brake pedal is depressed with the shift lever in the neutral position.
xThe accelerator pedal is depressed.
xThe shift lever is shifted to a position other than neutral with the brake pedal released
and the clutch pedal depressed.
xThe driver's seat belt is unfastened.
x(Automatic transaxle)
xThe accelerator pedal is depressed with the selector lever in the D or M (not in second
gear fixed mode) position.
xThe selector lever is shifted to the R position.
xThe selector lever is shifted from N or P position to D or M (not in second gear fixed
mode) position.
xThe steering wheel is operated with the selector lever in the D or M (not in second gear
fixed mode) position.
xThe selector lever is in the M position and the second gear fixed mode is selected.
x(Except European model)
x(Manual transaxle)
With the shift lever in the neutral position, the driver's seat belt is unfastened and the
driver's door is opened.
x(Automatic transaxle)
With the selector lever in the N or P position, the driver's seat belt is unfastened and the
driver's door is opened.
: K H Q ' U L Y L Q J
6 W D U W 6 W R S ( Q J L Q H
Page 200 of 759
' U L Y L Q J 7 L S V
: $ 5 1 , 1 *
Do not let the vehicle move in a direction
opposite to the direction selected by the
selector lever:
Do not let the vehicle move backward with
the selector lever in a forward position, or
do not let the vehicle move forward with
the selector lever in the reverse position.
Otherwise, the engine may stop, causing
the loss of the power brake and power
steering functions, and make it difficult to
control the vehicle which could result in an
accident.
3 D V V L Q J
) R U H [ W U D S R Z H U Z K H Q S D V V L Q J D Q R W K H U
Y H K L F O H R U F O L P E L Q J V W H H S J U D G H V G H S U H V V
W K H D F F H O H U D W R U I X O O \ 7 K H W U D Q V D [ O H Z L O O
V K L I W W R D O R Z H U J H D U G H S H Q G L Q J R Q Y H K L F O H
V S H H G
NOTE
xThe accelerator pedal may initially feel
heavy as it is being depressed, then feel
lighter as it is depressed further. This
change in pedal force aids the engine
control system in determining how much
the accelerator pedal has been
depressed for performing kickdown, and
functions to control whether or not
kickdown should be performed.
xWhile the selector lever is in the M
position and the DSC is turned off,
manual shift mode does not switch to
automatic shift mode even if the
accelerator pedal is completely
depressed. Operate the selector lever.
& O L P E L Q J V W H H S J U D G H V I U R P D V W R S
7 R F O L P E D V W H H S J U D G H I U R P D V W R S S H G
S R V L W L R Q
' H S U H V V W K H E U D N H S H G D O
6 K L I W W R ' R U 0 G H S H Q G L Q J R Q W K H
O R D G Z H L J K W D Q G J U D G H V W H H S Q H V V
5 H O H D V H W K H E U D N H S H G D O Z K L O H
J U D G X D O O \ D F F H O H U D W L Q J
' H V F H Q G L Q J V W H H S J U D G H V
: K H Q G H V F H Q G L Q J D V W H H S J U D G H V K L I W W R
O R Z H U J H D U V G H S H Q G L Q J R Q O R D G Z H L J K W D Q G
J U D G H V W H H S Q H V V ' H V F H Q G V O R Z O \ X V L Q J W K H
E U D N H V R Q O \ R F F D V L R Q D O O \ W R S U H Y H Q W W K H P
I U R P R Y H U K H D W L Q J
: K H Q ' U L Y L Q J
$ X W R P D W L F 7 U D Q V D [ O H
Page 216 of 759
NOTE
xThe direction indicators do not work
when the hazard warning lights are on.
xCheck local regulations about the use of
hazard warning lights while the vehicle
is being towed to verify that it is not in
violation of the law.
xIf the brake pedal is depressed while
driving on slippery roads, the
emergency stop signal system could
operate causing all the turn and lane
change signals to flash. Refer to
Emergency Stop Signal System on page
4-80.
xWhile the emergency stop signal system
is operating, all the direction indicators
automatically flash rapidly to caution
the driver of a vehicle following behind
your vehicle of a sudden braking
situation. Refer to Emergency Stop
Signal System on page 4-80.
: K H Q ' U L Y L Q J
6 Z L W F K H V D Q G & R Q W U R O V
Page 217 of 759
% U D N H 6 \ V W H P
▼ ) R R W % U D N H
7 K L V Y H K L F O H K D V S R Z H U D V V L V W H G E U D N H V
W K D W D G M X V W D X W R P D W L F D O O \ W K U R X J K Q R U P D O
X V H
6 K R X O G S R Z H U D V V L V W I D L O \ R X F D Q V W R S E \
D S S O \ L Q J J U H D W H U I R U F H W K D Q Q R U P D O W R W K H
E U D N H S H G D O % X W W K H G L V W D Q F H U H T X L U H G W R
V W R S Z L O O E H J U H D W H U W K D Q X V X D O
: $ 5 1 , 1 *
Do not coast with the engine stalled or
turned
off,
find a safe place to stop:
Coasting with the engine stalled or turned
off is dangerous. Braking will require more
effort, and the brake's power-assist could
be depleted if you pump the brake. This will
cause longer stopping distances or even an
accident.
Shift to a lower gear when going down
steep hills:
Driving with your foot continuously on the
brake pedal or steadily applying the brakes
for long distances is dangerous. This causes
overheated brakes, resulting in longer
stopping distances or even total brake
failure. This could cause loss of vehicle
control and a serious accident. Avoid
continuous application of the brakes.
Dry off brakes that have become wet by
driving slowly, releasing the accelerator
pedal and lightly applying the brakes
several times until the brake performance
returns to normal:
Driving with wet brakes is dangerous.
Increased stopping distance or the vehicle
pulling to one side when braking could
result in a serious accident. Light braking
will indicate whether the brakes have been
affected.
& $ 8 7 , 2 1
¾Do not drive with your foot held on the
clutch pedal or brake pedal, or hold the
clutch pedal depressed halfway
unnecessarily. Doing so could result in
the following:
¾The clutch and brake parts will wear
out more quickly.
¾The brakes can overheat and adversely
affect brake performance.
¾Always depress the brake pedal with the
right foot. Applying the brakes with the
unaccustomed left foot could slow your
reaction time to an emergency situation
resulting in insufficient braking
operation.
: K H Q ' U L Y L Q J
% U D N H