display MAZDA MODEL 3 HATCHBACK 2015 Navigation Manual (in English)

20
3.1.1 Entering an address or a part of the address
If you know at least a part of the address, it is the quickest way to se\
lect the destination of the
route.
Using the same screen, you can fi nd an address by entering:
• Destination address
• The center of a city
• An intersection
• The midpoint of a street
Note! If an address or part of a facility name is input, a search candidate li\
st
including the input characters is displayed. The greater the number of
characters input the more the list is re
fi ned.
3.1.1.1 Entering an address
To enter an address as the destination, do as follows:
1. Select
after selecting on the MAP screen.
2. Select
.
3. By default, the navigation system proposes the country and city where yo\
u are. If needed, select
, enter the fi rst few letters of the country name on the keyboard,
and select one country from the list of results.
/"7"76#&JOEC







22
6. Enter the house number:
a. Select
.
b. Enter the house number on the keyboard. (To enter letters, select
.)
c. Select
to fi nish entering the address. (If the entered house number cannot be
found, the midpoint of the street is selected as the destination.)
7. The selected location is shown on the map.
The system transitions to the next screen by selecting , or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
8. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC







24
5. Instead of entering the house number, select
. The midpoint of the street is
selected as the destination.
6. The selected location is shown on the map.
The system transitions to the next screen by selecting , or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
7. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC







26
6. The selected location is shown on the map.
The system transitions to the next screen by selecting
, or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
7. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC







27
3.1.1.4 Selecting a city center as the destination
The city center is not the geometric center of the city but an arbitrary\
point on the map the
creators have chosen. In cities and villages, it is usually the most imp\
ortant intersection; in
larger cities, it is one of the important intersections.1. Select
after selecting on the MAP screen.
2. Select
.
3. If necessary, modify the country and city as described earlier (page 20).
4. Enter the street name: a. Select
.
b. Start entering the street name on the keyboard.
c. Find the street you need:
• The most likely street name is always shown in the input fi eld. To accept it,
select
.
• If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the lis\
t of
results before it appears automatically, select
). Select the street from
the list.

5. Instead of entering the street name, select . This way the center of the
displayed city becomes the destination of the route.
/"7"76#&JOEC







28
6. The selected location is shown on the map.
The system transitions to the next screen by selecting
, or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
7. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC







29
3.1.2 Selecting the destination from the POI (point of interest)
You can select your destination from the POI (point of interest) includ\
ed with the navigation
system.
Using the same screen, you can fi nd a POI (point of interest) in different ways:
• You can quickly fi nd a nearby POI (point of interest) by its name using the Quick search\

feature.
• You can fi nd frequently searched types of POI (point of interest) with only a fe\
w screen
selects using the Preset search feature.
• You can search for a POI (point of interest) by its category.
• You can search for a POI (point of interest) by its name.
3.1.2.1 Quick search for a POI (point of interest)
If the name for a POI (point of interest) is input, a search candidate\
list is displayed. One
destination among the candidates can be selected. • Along the recommended route if it exists or
• Around your current location if there is no destination given.
Start the Quick search function:
1. Select
after selecting on the MAP screen.
2. Select
.
3. Select .
/"7"76#&JOEC







30
4. Using the keyboard, enter the name of the POI (point of interest).
Note!
If an address or part of a facility name is input, a search candidate li\
st
including the input characters is displayed. The greater the number of
characters input the more the list is re
fi ned.
5. After entering a few letters, select
to open the list of POI (point of interest) with
names containing the entered character sequence.
6. The selected location is shown on the map.
The system transitions to the next screen by selecting , or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
/"7"76#&JOEC







31
7. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC







32
3.1.2.2 Searching for Help nearby
The Preset search feature lets you quickly fi nd the most frequently selected types of Places.
1. Select
after selecting on the MAP screen.
Or, select after selecting as an alternative method.
2. In the Navigation menu, select
.
3. Preset search categories appear, all for searching around the current position (or around the last known position if the current position is not available)\
:
4. Select any of the quick search buttons to get an instant list of Places.\

5. The selected location is shown on the map. The system transitions to the next screen by selecting , or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
/"7"76#&JOEC