length MAZDA MODEL 3 HATCHBACK 2015 Navigation Manual (in English)

8
2.2 Navigation menu
You can reach all parts of the navigation system from the Navigation menu\
.
Select
and open the navigation menu.

You have the following options: •
/ : Open/close
Opens and closes the UMP (menu bar).
The UMP (menu bar) is displayed on the lower part of the screen.
•
: Adds a destination.
Select your destination by entering an address or selecting a POI (poin\
t of interest), a
location on the map or one of your Favorite destinations. You can also look up your recent
destinations from the Smart History by entering the coordinates. If an I\
nternet connection
is available, Local Search can be of further help to fi nd your destination.
•
: Displays the screen where traf fi c information and the GPS reception conditions can
be set and veri fi ed.
•
: Cancels waypoint/route
•
: Finds Places nearby
You can search for points of interest (POI) near the vehicle position.
•
: Displays the route parameters and the route in its full length on the \
map. You can
also perform route-related actions such as editing or canceling your rou\
te, picking route
alternatives, avoiding parts of the route, simulating navigation or addi\
ng the destination to
your Favorites.
•
/ / : Changes View mode
The map view mode can be changed (2D north up/2D heading up/3D).
•
: Switches to the Settings screen where you change navigation settings.
Note! Some functions are not available depending on some countries and
regions.
/"7"76#&JOEC







33
6. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
3.1.2.3 Searching for a POI (point of interest) by category
You can search for Places of Interest by their categories and subcategori\
es.
1. Select
after selecting on the MAP screen.
2. Select
.
3. Select
.
4. Select the area around which the Place should be searched for:
• Select
to search around the current position or if it is not available,
around the last know position. (The result list will be ordered by the \
distance
from this position.)
• Select
to search along the active route, and not around a given
point. This is useful when you search for a later stopover that results in a
minimal detour only, such as searching for upcoming gasoline stations or
restaurants. (The result list will be ordered by the length of the nece\
ssary
detour.)
• Select
to search for a place around the destination
of the active route. (The result list will be ordered by the distance f\
rom the
destination.)
• Select
to search for a place within a selected city. (The result list will be
ordered by the distance from the center of the selected city.)

/"7"76#&JOEC







36
3.1.2.4 Searching for a POI (point of interest) by name
You can search for Places of Interest by their names. You can search around different locations
or along your route in the whole Place database or in one Place category\
or subcategory only. 1. Select
after selecting on the MAP screen.
2. Select
.
3. Select
.
4. Select the area around which the Place should be searched for:
• Select
to search around the current position or if it is not available,
around the last know position. (The result list will be ordered by the \
distance
from this position.)
• Select
to search along the active route, and not around a given
point. This is useful when you search for a later stopover that results in a
minimal detour only, such as searching for upcoming gasoline stations or
restaurants. (The result list will be ordered by the length of the nece\
ssary
detour.)
• Select
to search for a place around the destination
of the active route. (The result list will be ordered by the distance f\
rom the
destination.)
• Select
to search for a place within a selected city. (The result list will be
ordered by the distance from the center of the selected city.)

5. (optional) If you have selected
, select the city to search in.
6. (optional) Select one of the main Place categories (e.g. Accommodation) to search in or select to search among all Places.
/"7"76#&JOEC







46
3.2 Checking route parameters and accessing route related functions
You can check different parameters of the route recommended by the navigation system.1. Select
after selecting on the MAP screen.
2. The following pieces of information are displayed:
• The name and/or address of the destination.
• The total time of the route.
• The total length of the route.
• The route planning method (e.g. Fast).

3. You have the following options on this screen (for detailed instructions\
on how to use them, see the next chapter):
• Select
to edit the route.
• Select
to display the entire route on the map.
• Select
to bypass a part of the route.
• Select
to delete the active route.
Note! There are other convenient functions.
/"7"76#&JOEC







55
4.1.5.2 Online traffi c information (Only some countries and regions)
Unlike historical traf fi c information, online traf fi c can provide you with the real-time status of
the traffi c. Route calculation can avoid road blocks or unexpected traf fi c jams caused by an
accident.
Note! This feature needs an active Internet connection.
The application automatically takes into account the traf fi c events received. You do not need to
set anything in the program. When the navigation system receives traf fi c information that may
affect your route, the program will warn you that it is recalculating the \
route, and navigation will
continue with a new route that is optimal considering the most up-to-dat\
e traf fi c conditions.
To fi ne-tune this recalculation, you can set the minimum delay that can trigg\
er a route
recalculation, or you can instruct the navigation system to have you con\
fi rm the new
recommended route before it takes effect. You can do these in Traf fi c settings (page 58).
Road segments affected by traffi c events are displayed with an alternate color on the map, and
small symbols above the road show the nature of the event:
1. Select
after selecting on the MAP screen.
2. Select
.
3. Select the traffi c category you are interested in, or select
to see the list of
all events:
4. Now select any of the list items to see its details, and to display the \
affected road
segment in its full length on the map:

/"7"76#&JOEC