manual radio set MAZDA MODEL 3 HATCHBACK 2015 Navigation Manual (in English)

63
5.2 Connecting to Wi-Fi™
Connection is possible under conditions in which an Internet connection \
using Wi-Fi™ is
possible, and the Wi-Fi™ setting for the device is on.
5.2.1 Turning Wi-Fi™ on
1. Select the icon on the home screen and display the Settings screen.
2. Select the
tab.
3. Select
or .
4. Turn the Wi-Fi™ setting on.
5. Available networks are displayed.
6. Select a desired network.
Note! • When the connection to a Wi-Fi™ network is successful, the
icon
is displayed.
• If there is no available network when connecting to Wi-Fi™ for the fi rst time, you need to fi rst add a network.
• When entering in a network area previously connected to, re- connection to the network is automatic.
• The
icon is displayed on the network name currently connected.
• The network name and its security type, and the radio wave
reception level are displayed.
• If the connection to a network is lost, connection to another available \
network is automatic.
5.2.2 Adding a network
To connect to a network except for the public Wi-Fi™ area, a network n\
eeds to be added
manually. By adding the network, the security certi fi cation information of the network is
recorded, and automatic connection is possible when entering an availabl\
e area. A maximum of
20 networks can be stored.
1. Turn on Wi-Fi™ if it is off.
2. Select
.
3. Select
. The keyboard screen is displayed.
4. Input a network name (SSID) and select
.
5. Select
.
6. Select a security type.
7. Select
. The keyboard screen is displayed.
8. Input the password then select
.
9. Select
to connect to the network.
Note! • If “None” is selected during the security type selection, the pass\
word
cannot be input.
• If 20 networks have already been stored and another network is newly stored, the oldes network (oldest access) is deleted.
/"7"76#&JOEC