7–12
If Trouble Arises
Flat Tyre
WARNING
Never use the air compressor above 300
kPa (3.1 kgf/cm 2 , 3 bar, 43.5 psi):
Using the air compressor at an
infl ation pressure above 300 kPa (3.1
kgf/cm
2 , 3 bar, 43.5 psi) continuously
is dangerous. If the air compressor
overheats, hot air will be exhausted and
you could get burned.
CAUTION
If the air compressor operates slowly or
becomes hot, this indicates overheating.
Turn the air compressor OFF
immediately and cancel the procedure.
In this case, leave the air compressor
turned OFF for about 30 minutes or
longer and wait until the temperature
decreases.
NOTE
Check the tyre infl ation pressure
label (driver's door frame) for the
correct tyre infl ation pressure.
Do not operate the air compressor for
a continuous 10 minutes or longer
because using it for long periods
could cause a malfunction.
If the tyre infl ation pressure does
not increase, repair of the tyre is not
possible. If the tyre does not reach
the specifi ed tyre infl ation pressure
within 10 minutes, it may have
received extensive damage. In this
case, the repair using the emergency
fl at tyre repair kit was not successful.
Contact an expert repairer, we
recommend an Authorised Mazda
Repairer.
13. Adhere the speed restriction sticker to
an area where it can be viewed easily
by the driver.
. B [ E B @ &