MAZDA MODEL 3 HATCHBACK 2015 Quick Guide (in English)

20
When Driving
Diesel Particulate Filter
The diesel particulate filter collects and eliminates most of the particulate matter
(PM) in the exhaust gas of the diesel engine for improved exhaust gas processing
ability.
While the particulate matter (PM) collected in the diesel particulate filter is
eliminated automatically, fuel may be mixed with the engine oil increasing the
engine oil level. If the engine oil level exceeds the “X” mark on the dipstick,
replace the engine oil.
For details, refer to Section 4, “Tyre Pressure Monitoring System” or
“Diesel Particulate Filter”.
The Tyre Pressure Monitoring System (TPMS) monitors the air pressure of all
four tyres. If the air pressure of one or more tyres is too low, the system warns the
driver by indicating the tyre pressure monitoring system warning light in the
instrument cluster and operating a beep sound.
In the following cases, system initialization must be performed so that the system
operates normally.
• A tyre pressure is adjusted.
• Tyre rotation is performed.
• A tyre or wheel is replaced.
• The battery is replaced or completely drained.
• The tyre pressure monitoring system warning
light is illuminated.
Tyre Pressure Monitoring System
/C\FCA'(''.A'FKVKQPA3WKEM)WKFGKPFD

Interior Features
21
Airflow display Temperature setting display (driver)
Mode selector
display A/C mode display
Temperature setting display (passenger)
Air intake selector
(recirculated air position)
Air intake selector
(outside air position) Driver temperature control dial
AUTO switch
Mode selector switch Fan control switchOFF switchWindscreen defroster switch
Rear window defogger switch
DUAL switch
A/C switch
Passenger temperature
control dial
Air-Conditioning System (Dual-Zone Automatic Type)
Operation of Automatic Air Conditioning
1. Press the AUTO switch. Selection of the airflow mode, air intake selector and
amount of airflow will be automatically controlled.
2. Use the temperature control dial to select a desired temperature.
3. To turn off the system, press the OFF switch.
Press the DUAL switch or turn the front passenger temperature control dial to
control the set temperature individually for the driver and front passenger.
For details, refer to Section 5, “Air-Conditioning System”.
/C\FCA'(''.A'FKVKQPA3WKEM)WKFGKPFD

22
Maintenance and Care
Selector
X Mark Full Low
Inspecting Engine Oil Level
If the engine oil level exceeds the “X” mark on the dipstick, replace the engine oil.
For details, refer to Section 6, “Owner Maintenance”.
When inspecting the engine oil level, pull out the dipstick straight without
twisting.
In addition, when inserting the dipstick, always insert it without twisting so that
the “X” mark faces the front of the vehicle.
After replacing the engine oil, have a repair shop such as an Authorised Mazda
Repairer perform the initialization (engine oil data resetting) of the recorded value.
If the value recorded by the computer is not initialized, the wrench indicator light
may not turn off or it may turn on earlier than normal.
NOTE
The initialization (engine oil data resetting) of the recorded value can be
performed using the following procedure:
1. Switch the ignition OFF.
2. Switch the ignition ON with the selector pressed, and press and hold the
selector for about 5 seconds until the master warning light flashes.
3. After the master warning light flashes for several seconds, the initial-
ization is completed.
/C\FCA'(''.A'FKVKQPA3WKEM)WKFGKPFD

23
Maintenance and Care
Windscreen washer
fluid reservoirBrake/Clutch fluid reservoir
Engine oil dipstick
BatteryFuse block
Cooling system cap
Engine coolant reservoir
Engine oil-filler cap SKYACTIV-G 1.5 and SKYACTIV-G 2.0
Windscreen washer
fluid reservoirBrake/Clutch fluid reservoir
Engine oil dipstickBattery
Fuse block
Cooling system capAutomatic transaxle fluid-level
dipstick (only for automatic transaxle)
Engine coolant reservoir Engine oil-filler cap MZR 1.6
Brake/Clutch fluid reservoir
Engine oil dipstick
Battery
Fuse block
Cooling system cap
Engine coolant reservoir
Engine oil-filler cap SKYACTIV-D 2.2Windscreen washer
fluid reservoir
Owner Maintenance Precautions
Routine Service
We highly recommend that these items be inspected daily, or at least every week.
• Engine Oil Level
• Engine Coolant Level
• Brake and Clutch Fluid Level
• Washer Fluid Level
• Battery Maintenance
• Tyre Inflation Pressure
For details, refer to Section 6, “Owner Maintenance”.
/C\FCA'(''.A'FKVKQPA3WKEM)WKFGKPFD

If Trouble Arises
24
If Trouble Arises
• Flat Tyre
If you have a flat tyre, drive slowly to a level spot that is well off the road and
out of the way of traffic to change the tyre.
In the event of a flat tyre, use the emergency flat tyre repair kit to repair the tyre
temporarily or use the temporary spare tyre.
• Overheating
1. Drive safely to the side of the road and park off the right-of-way.
2. Check whether coolant or steam is escaping from the engine compartment.
If steam is coming from the engine compartment:
Do not go near the front of the vehicle. Stop the engine.
Wait until the steam dissipates, then open the bonnet and start the engine.
If neither coolant nor steam is escaping:
Open the bonnet and idle the engine until it cools.
• Towing Description
We recommend that towing be done only by an expert repairer, we recommend
an Authorised Mazda Repairer or a commercial tow-truck service.
• Warning Lights and Warning Sounds
If a warning light illuminates or flashes or a warning sound is heard, check for
details concerning the warning light or sound in this guide. If the problem
cannot be resolved, contact an Authorised Mazda Repairer.
For details, refer to Section 7, “Flat Tyre”, “Overheating”, “Emergency Towing” or
“Warning/Indicator Lights and Warning Sounds”.
/C\FCA'(''.A'FKVKQPA3WKEM)WKFGKPFD