cooling MAZDA MODEL 6 HATCHBACK 2005 Quicktips (in English)
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2005, Model line: MODEL 6 HATCHBACK, Model: MAZDA MODEL 6 HATCHBACK 2005Pages: 12, PDF Size: 0.8 MB
Page 8 of 12

CLIMATE CONTROLS
Always check the Owner’s Manual for more operating information and safety features
Climate
Controls
Interior
Lights
Quick Tips 2005 Mazda6 page 14
page 15
2. Fan control
Rotate knob clockwise/
counterclockwise to increase/
decrease fan speed
3. Temperature control
Cooler/warmer = rotate knob
counterclockwise/clockwise
4. A/C= air conditioner
Press to turn on/off6. Rear window defogger
Press on/off; shuts off with
ignition or automatically after
15 minutes of operation; also
operates heated side mirrors*
Tip: The word “heated” is
imprinted on glass reflector
of side mirrors, this indicates
they are heated
To prevent moisture
buildup, never drive
with system off
Objects placed under the front
seats may interfere with air
flow to the rear
Automatic operation
Press AUTO (8) for automatic
operation; rotate outer dial to set
temperature, see Owner’s Manual
1. Map/reading light switch
Press on/off
2. Interior light switch
DOOR = light on when
door open
OFF = light always off
3. Interior map/reading
light
4. Sunglass holder
Press concaved lip to open5. Sunroof tilt switch*
Press rear of switch to
tilt rear of sunroof
Press front of switch to close
6. Sunroof slide switch*
Press rear of switch to open
sunroof
Press front of switch to close
Illuminated visor mirrors
Mirrors lighted when covers
open; off when closed 1. Air flow selections
= air to dash
= air to dash and floor
= air to floor
= air to floor and
windshield
= air to windshield (defrost)
(Manual Climate Control)5. Air intake control
= recirculate inside air;
use for maximum cooling
= fresh air
WARNING: Do not use
position in cold
weather, windows may
fog and hamper vision
7. Windshield defroster switch
Press: Fresh air position is
automatically selected, A/C
automatically turns ON
Control positions for
maximum defrost
Fan to maximum, temperature
to maximum hot, selected
Tips: To help prevent windshield
fogging in humid weather,
select before starting
engine
8172
A/C
PUSHAUTOPUSHOFF
FRONT
MODE012
3
4
A/C
321
456654
Manual A/CAutomatic A/C**
T
I
L
TSL
ID
E
121
43356
OFFDOO
R
*Denotes optional equipment
**Standard on all V6 models (all body styles)
Page 12 of 12

UNDER HOOD
Always check the Owner’s Manual for more operating information and safety features
Under Hood
Quick Tips 2005 Mazda6 page 22
page 23
1. Engine oil filler cap
SAE 5W-20
2. Automatic transmission
fluid (ATF) dipstick*
See Owner’s Manual
3 . Brake/Clutch* fluid reservoir
Fill to MAX mark with DOT 3
fluid; check with cap on
4. Battery
5. Fuse block
6. Air filter
7. Hood support rod
8. Hood latch
Push hood latch to the left,
open hood
9. Engine coolant reservoir
Level should be between FULL
and LOW markings when cold
WARNING: Never remove
coolant reserve tank cap
while engine is running or
hot; you could get burned
10. Engine oil dipstick
Check with engine off after
approximately 5 minutes and
at operating temperature; fluid
level should be between MAX
and MIN markings on dipstick
11. Power steering fluid
reservoir
Check with engine off and at
normal temperature; fill to
MAX mark
12. Windshield washer
reservoir
Fill with windshield washer fluid
Break-in period
First 600 miles:
Drive at varying road and engine
speeds; avoid full throttle, rapid
acceleration or kick-down of
transmission
Unique driving
conditions
†Every 5,000 miles change
oil/filter, inspect coolant level,
lights, brake/clutch fluid,
tire pressure/wear, power
steering fluid, locks/hinges
and washer fluid
Normal maintenance notes
Rotate tires every 7,500 miles or
sooner if needed; replace cabin air
filter every 25,000 miles or 24 monthsA.Change: Engine oil/
replace filter
Lube: Locks and hinges
B.Inspect: Disc brakes
C.Inspect: Drive belts (3.0 liter),
fuel lines and hoses, brake
lines, hoses and connections,
steering operation and linkages,
front suspension ball joints,
driveshaft dust boots, inspect
exhaust system and heat shields
every 45,000 miles and
cooling system
D.Inspect: Drive belts (2.3 liter)
Replace: Air filter
E.Inspect: Hoses and tubes for
emission system
F.Replace: Spark plugs
Inspect: Engine valve clearance
(2.3 liter), adjust if noisy
G.Replace: Engine coolant
3.0-liter V62.3-liter I4
*Denotes optional equipment†See Owner’s Manual
101197126
5124 3
8
101179126
51243
8
7,500 miles
15,000 miles
22,500 miles
30,000 miles
37,500 miles
45,000 miles
52,500 miles
60,000 miles
67,500 miles
75,000 miles
82,500 miles
90,000 miles
A A A
F A A
B C E A A
A D
A
BC A
A B
A
105,000 miles G