lock MAZDA MODEL 626 2001 Repair Manual

Form No. 8P95-EA-00G
Driving Your Mazda5-44

054-1C1E
Lighting Control and Turn
Signals
Second stop
First stop
OFF
J94A4029Headlights
To turn on the lights, turn the knob on
the end of the control lever. The first stop (
) turns on the
taillights, dashboard lights, parking
lights, and license plate lights.
The second stop () turns on the
headlights, taillights, dashboard lights,
parking lights, and license plate lights.

054-16AE
If the light switch is left on, the lights
will automatically switch off after 5
seconds of turning of the ignition
switch (LOCK position) or removing
the key.
The light will automatically switch on
when the ignition switch is turned to
the ACC or ON position.

054-2KE
 Lights-on reminder
If lights are on and the key is removed
from the ignition switch, a beep will
sound when the any door is opened.

Form No. 8P95-EA-00G
Driving Your Mazda
5-49
Pull the lever toward you and hold it
to spray washer fluid. In the OFF or
INT position, the wipers will be
activated until the lever is released.
If the washer doesn’t work, inspect the
fluid level (page 8-33). If it’ s OK,
consult an Authorized Mazda Dealer.
055-6BE
WARNING
!
Frozen Washer Fluid:Using windshield washer fluid in
freezing temperatures could be
dangerous. The washer fluid
could freeze on the windshield
and block your vision. You could
have an accident. Don’ t use the
washer without first warming the
windshield.

057-1F1E
Rear Window Defroster
J94A4036
The rear defroster clears frost, fog, and
thin ice from the rear window.
The ignition switch must be in the ON
position.

Form No. 8P95-EA-00G
Driving Your Mazda
5-51
058-1DE
Clock
Clock
J94A4051A
The clock is built into the audio
system (page 5-87).

139-1BE
Accessory SocketTo use the accessory socket, the
ignition switch must be in the ACC or
ON position.
Only use genuine Mazda accessories
or the equivalent requiring no greater
than 12V—10A.
CAUTION
!
To prevent accessory socket
damage or electrical failure, pay
attention to the following;
• Don’ t use accessories that
require more than 12V—10A.
• Don’ t use accessories that are
not genuine Mazda accessories
or the equivalent.
• Close the cover when the
accessory socket is not in use.
• Correctly insert the plug into
the accessory socket.

Form No. 8P95-EA-00G
Driving Your Mazda5-5445°J94S50171. Using a coin, turn the cap
counterclockwise (about 45° from
the closed position) and remove it.
J94S5018
Release
catch2. Open the tray by pulling the release catch.
3. Pass the plug and the cord through the hole of the tray and insert the
plug in the socket. J94S5019
45
°
Cord
4. Make sure the plug cord is running
through the cap slot, reinstall the
cap and turn it clockwise (about
45° to the opened position).

Form No. 8P95-EA-00G
Driving Your Mazda
5-55
061-1DE
Glove BoxUnlockLock
J94A4040
To open the glove box, pull the latch
toward you.
WARNING
!
Open Glove Box:An open glove box can be
dangerous while the vehicle is
moving. To reduce the possibility
of injury in an accident or a
sudden stop, keep the glove box
closed while the vehicle is
moving.


061-2FE
The door has a lock, insert the primary
key and turn it clockwise to lock and
counterclockwise to unlock.

Form No. 8P95-EA-00G
Driving Your Mazda5-66J94AAC10Fan control dial This dial allows variable fan speeds.
0 — Fan off
1 — Low speed
2 — Medium low speed
3 — Medium high speed
4 — High speed
Cold Hot
J94AAC11Temperature control dial
This dial controls temperature of the
air coming through the system. Turn it
clockwise for hot (red) and
counterclockwise for cold (blue).

Form No. 8P95-EA-00G
*Some models.
Driving Your Mazda5-82
N068-1NE
AM/FM Radio with Compact Disc Player*07L032–002B
Disc in indicator Band selector buttonsCD play buttonMD*
1/Cassette tape play button*
1
CD eject button
Clock button
Power/Volume knob Channel preset buttons Seek tuning/Track down/
APC button*
1
Seek tuning/Track up/
APC button*
1
Reverse/Rewind button*
1
Program*
1/Random button
Repeat button
Disc up button*
1
Disc down button*
1
Manual tuning/
Audio control knobDisplay
Scan/Hour set button
Auto memory/
Minute set button
Fast-forward button
*1 Use this button if a cassette tape player, MD player or CD changer is connected to this unit.

Form No. 8P95-EA-00G
*Some models.Driving Your Mazda
5-83
N068-1NE
AM/FM Radio with Cassette Tape and Compact Disc Player*/Changer (In-Dash CD Changer)*07L032–002
Disc in indicator Band selector buttonsCD play buttonMD/Cassette tape play button CD eject button
Clock button
Power/Volume knob Channel preset buttons Seek tuning/Track down/
APC button Seek tuning/Track up/
APC button
Reverse/Rewind button
Program/Random button
Repeat button
Disc up button
Disc down button
Load button
(Only in-dash CD changer)
Cassette tape eject button
Dolby NR button
Manual tuning/
Audio control knobDisplay
Scan/Hour set button
Auto memory/
Minute set button
Fast-forward button

Form No. 8P95-EA-00G
Driving Your Mazda
5-87
Fader control
To adjust the sound distribution
between front and rear speakers, select
FADE by pressing the audio control
knob. “FADE” will be displayed.
Turn the audio control knob to the
right to shift the sound to the rear, to
the left to shift the sound to the front.
The level will be displayed.
Release the audio control knob when
the desired level has been reached. Balance control
To adjust the sound distribution
between left and right speakers, select
BAL by pressing the audio control
knob.
“BAL” will be displayed.
Turn the audio control knob to the
right to shift the sound to the right, to
the left to shift the sound to the left.
The level will be displayed.
Release the audio control knob when
the desired level has been reached.
07L032–003
Clock
 Setting the time
The clock can be set at any time when
the ignition switch is in the ACC or
ON position.

Form No. 8P95-EA-00G
Driving Your Mazda5-881. To adjust the time, press the clockbutton for about 2 seconds until a
beep is heard.
2. The clock’ s current time will flash
until the time is set.
Minute set Hour set
07L032–0073. To advance the hours, press the hour set button (H) to advance the
minutes, press the minute set button
(M) while the time is flashing.
4. Press the clock button again to start the clock.
NOTEIf the power supply to the unit is
interrupted (if the fuse blows or
the vehicle’ s battery is
disconnected), the clock will need
to be reset.