oil level MAZDA MODEL 626 2001 Owners Manual

Form No. 8P95-EA-00G
Protecting Your Mazda
4-7
WARNING
!
Snow Blocking the Exhaust Gas:Running the engine when a
vehicle is stopped in deep snow is
dangerous. The exhaust pipe
could be blocked by the snow,
allowing exhaust gas to enter the
cabin. Because exhaust gas
contains poisonous carbon
monoxide, anyone in the cabin
could be injured or killed. Clear
the snow from underneath and
around your vehicle before
starting the engine.
034-1AE
Before DrivingBefore Getting In
• Be sure the windows, outside
mirror(s), and outside lights are
clean.
• Inspect inflation pressures and
condition of tires.
• Look under the vehicle for any sign
of a leak.
• If you plan to back up, make sure
nothing will be in your way.
034-2AE
NOTEEngine oil, engine coolant,
brake/clutch fluid, washer fluid,
and other fluid levels should be
inspected daily, weekly, or at
refueling, depending on the fluid.
See Maintenance, Section 8.

Form No. 8P95-EA-00G
Driving Your Mazda5-383. If it’s OK, the charging system has
a problem. Consult an Authorized
Mazda Dealer as soon as possible.
053-6AE
CAUTION
!
Don’ t drive with a loose or broken
alternator belt. The engine could
overheat because this belt also
drives the water pump.

053-7EE
 Engine Oil Pressure
Warning Light
This warning light indicates low
engine oil pressure.
If the light comes on while driving:
1. Drive to the side of the road and park off the right-of-way.
2. Turn off the engine and inspect the engine oil level (page 8-17). If it’ s
low, add oil. 3. Check the light.
If the light remains on even after
you add oil, have your vehicle
towed to the nearest service station
or to an Authorized Mazda Dealer.
CAUTION
!
Don’ t run the engine if oil pressure
is low. It could result in extensive
engine damage.

Form No. 8P95-EA-00G
MaintenanceBecause your Mazda is a large piece of intricate machinery, it needs regular care in the form of maintenance
and servicing. Many owners prefer to do much of this work themselves.
So Section 8 has been prepared as a guide for the operator who wants to self-service such minor jobs\
as
changing the engine oil, replacing bulbs and wiper blades, charging the battery, and rotating the tires. All
maintenance schedules are included, along with instructions on how to make regular inspections of such things
as fluid levels.Introduction 8- 2
Scheduled Maintenance 8- 3 Owner Maintenance 8-11
8
8-1
080-1A1E

Form No. 8P95-EA-00G
I: Inspect and repair, clean, adjust, or replace if necessary
(Oil-permeated air filter cannot be cleaned using the air-blow method.)
R : Replace
Maintenance8-8Schedule 2 (Cont ’d)
MAINTENANCE
INTERVALS
Number of months or miles (kilometers), whichever comes first
INTERVALS
Months
4
8
12
16
20
24
28
32
36
40
44
48
MAINTENANCE

1000 km
8
16
24
32
40
48
56
64
72
80
88
96
MAINTENANCE

ITEM
(
1000 miles)
(5)
(10)
(15)
(20)
(25)
(30)
(35)
(40)
(45)
(50)
(55)
(60)
Spark plugs
2.0-liter engine
R
R
Spark plugs
2.5-liter engine
Replace every 96,000 km (60,000 miles)
Idle speed
I
I
Fuel lines and hoses
I*1
I*
1
Cooling system
I
I
Engine coolant
Replace at first 168,000 km (105,000 miles) or 60 months;
after that, every 48,000 km (30,000 miles) or 24 months
Engine coolant level
I
I
I
I
I
I
I
I
I
I
I
I
Function of all lights
I
I
I
I
I
I
I
I
I
I
I
I
Brake lines, hoses and connections
I
I
*1 According to state and federal regulations, failure to perform maintenan\
ce on these items will not void your emissions warranties. However, Mazda
recommends that all maintenance services be performed at the recommended\
time or kilometrage (mileage) period to ensure long-term reliability.

Form No. 8P95-EA-00G
Maintenance
8-11
083-1AE
Owner MaintenanceOwner Maintenance Schedule
The owner or a qualified service
technician should make these vehicle
inspections at the indicated intervals to
ensure safe and dependable operation.
Bring any problem to the attention of
an Authorized Mazda Dealer or
qualified service technician as soon as
possible.
 When refueling
• Brake and clutch fluid level
(page 8-25) •
Engine coolant level
(page 8-21)
• Engine oil level
(page 8-17)
• Washer fluid level
(page 8-33)
 At least monthly
• Tire inflation pressures
(page 8-41)
083-46A1E
At least twice a year
(for example, every spring and
fall)
• Automatic transaxle fluid level
(page 8-29)
• Power steering fluid level
(page 8-27)
You can do the following scheduled
maintenance items if you have some
mechanical ability and a few basic
tools and if you closely follow the
directions in this manual.
• Air filter
(page 8-34)

Form No. 8P95-EA-00G
Maintenance8-14
083-4AE
 Engine Compartment Overview
Cooling system cap
2.0-liter engine
Engine oil dipstick Air filter
Automatic transaxle fluid-level dipstick
(only for automatic transaxle)
Brake/Clutch fluid reservoir
Fuse block
Battery
Coolant reservoir
Windshield washer fluid reservoir
Power steering fluid reservoir
Engine oil-filler cap
J94A7001A

Form No. 8P95-EA-00G
Maintenance
8-15
Engine oil-filler cap
Engine oil dipstick
Air filter
Automatic transaxle fluid-level dipstick
(only for automatic transaxle)
Brake/Clutch fluid reservoir
Fuse block
Battery
Coolant reservoir
Windshield washer fluid reservoir
J94A7002A2.5-liter engine
Power steering fluid reservoir
Cooling system cap

Form No. 8P95-EA-00G
Maintenance
8-17
CAUTION
!
Using oils of viscosity besides
those recommended for specific
temperature ranges could result in
engine damage.Energy conserving oils are
recommended. A chief contribution
they make to fuel economy is reducing
the amount of fuel necessary to
overcome engine friction.

083-6A2E
J94A7005
2.0-liter engine
OKInspecting engine oil level
1. Be sure the vehicle is on a level surface.
2. Warm up the engine to normal operating temperature.
OK
J94A7004
2.5-liter engine3. Turn it off and wait 5 minutes forthe oil to return to the oil pan.
4. Pull out the dipstick, wipe it clean, and reinsert it fully.

Form No. 8P95-EA-00G
Maintenance8-185. Pull it out again and examine thelevel. It’ s OK between L and F.
But if it’ s near at or below L, add
enough oil to bring the level to F.
CAUTION
!
Don’ t add engine oil over F.
This may cause engine damage.NOTEThe distance between L and F on
the dipstick represents 1.0 L (1.06
US qt, 0.88 Imp qt).

083-7CE
Changing engine oil and filter
Change engine oil and filter according
to Scheduled Maintenance (page
8-3).
Please act responsibly—protect the
environment and take used oil to a
recycling facility. Ask your dealer or a
service station for information.
WARNING
!
Handling Used Engine Oil:Continuous contact with used
engine oil could be dangerous. It
could cause skin cancer. Always
wash with soap and water
immediately after changing oil
and filter.

Form No. 8P95-EA-00G
Maintenance8-20
083-47B1E
3. Replace the plug tightly after theoil has thoroughly drained.
4. Fill the engine with new oil to the F mark on the dipstick.
5. Securely replace the oil-filler cap.
6. Start the engine and inspect around the drain plug for leaks.
7. Turn it off and wait 5 minutes for the oil to return to the oil pan.

 083-48BE
Check the oil level and fill to the F
mark if necessary.
Oil capacity
(General reference only)
2.0-liter engine:
3.3 L (3.5 US qt, 2.9 Imp qt)
2.5-liter engine: 3.7 L (3.9 US qt, 3.3 Imp qt)
NOTE• The indicated engine oil
capacities are for general
reference purposes only. When
adding or changing oil, verify
the engine oil level with the oil
dipstick.
• Use only specified engine oil
(page 8-16).Changing oil filter
Because you need a special tool to
retighten the filter, an Authorized
Mazda Dealer should do the work.