steering wheel MAZDA MODEL B2300 2002 (in English) User Guide

MAZDA MODEL B2300 2002 (in English) User Guide MODEL B2300 2002 MAZDA MAZDA https://www.carmanualsonline.info/img/28/13735/w960_13735-0.png MAZDA MODEL B2300 2002 (in English) User Guide

Page 222 of 288

MAZDA MODEL B2300 2002   (in English) User Guide ²Do not use fuel, kerosene, or paint thinner to clean any parts.
²Wiper blades can be cleaned with isopropyl (rubbing) alcohol or
windshield washer solution. Be sure to replace wiper blades when the

Page 226 of 288

MAZDA MODEL B2300 2002   (in English) User Guide Maintenance ItemMaintenance Interval (Number of months or km (miles),
whichever comes first)
Months 4 8 12 16 20 24 28 32 36 40 44 48
x 1000 Miles 5 10 15 20 25 30 35 40 45 50 55 60
(x 1000 km) (8) (1

Page 228 of 288

MAZDA MODEL B2300 2002   (in English) User Guide Maintenance ItemMaintenance Interval (Number of months or Miles (km),
whichever comes first)
Months 52 56 60 64 68 72 76 80 84 88 92 96
x 1000 Miles 65 70 75 80 85 90 95 100 105 110 115 120
(x 1000 km

Page 231 of 288

MAZDA MODEL B2300 2002   (in English) User Guide ²Note any changes in the sound of the exhaust or any smell or exhaust
fumes in the vehicle.
²Check for vibrations in the steering wheel. Notice any increased
steering effort or looseness in the stee

Page 233 of 288

MAZDA MODEL B2300 2002   (in English) User Guide ²Manual transmission:
1. Set the parking brake.
2. Depress the clutch and place the gearshift in 1 (First).
3. Turn off the engine and remove the key.
4. Block the wheels to prevent the vehicle from

Page 261 of 288

MAZDA MODEL B2300 2002   (in English) User Guide CHECKING AND ADDING POWER STEERING FLUID
Check the power steering fluid.
Refer to the service maintenance
section for the service interval
schedules. If adding fluid is
necessary, use only MERCONtAT F

Page 285 of 288

MAZDA MODEL B2300 2002   (in English) User Guide Special notice
ambulance conversions ..............7
utility-type vehicles ....................7
Specification chart,
lubricants ...........................275±276
Speed control .....................
Page:   < prev 1-10 11-20