window MAZDA MODEL CX-3 2015 Quick Guide (in English)

3
Before Driving
Outside Mirrors
1. Rotate the mirror switch to the left or
right to choose the left or right side
mirror.
2. Press the mirror switch in the
appropriate direction.
For details, refer to Section 3, “Mirrors” or “Windows”.
Operation of the Power Windows
Each passenger window can also be operated using the master control switches on
the driver's door.
To open the window to the desired position, lightly hold down the switch.
To close the window to the desired position, lightly pull up the switch.
Centre position
Mirror switch
Left rear window
Right rear window Driver's window Master control switches
Front
passenger's
windowClose
Open
$9@&;&&%@&EJUJPO@2VJDL(VJEFJOEC







When Driving
17
The Smart City Brake Support (SCBS) detects a vehicle ahead by emitting a
near-infrared laser beam and receiving the beam reflected off the reflector of the
vehicle ahead, and then using it for the measurement. Consequently, the Smart
City Brake Support (SCBS) may not operate under the following conditions:
• Trucks with low loading platforms, vehicles travelling at extremely low
speeds, and vehicles with a high profile. Do not rely completely on the Smart City Brake Support (SCBS) system:
The Smart City Brake Support (SCBS) is a system which operates in response to a
vehicle ahead. It does not apply to two-wheeled vehicles or pedestrians.
If the vehicle height or inclination is changed, the system will not be able
to correctly detect vehicles or obstructions ahead resulting in the Smart
City Brake Support (SCBS) system not operating normally or mistakenly
operating, which could cause a serious accident.
WARNING
Do not modify the suspension:
NOTE
Smart City Brake Support (SCBS)
The Smart City Brake Support (SCBS) system is designed to reduce damage in the
event of a collision by operating the brake control (SCBS brake) when the
system's laser sensor (front) detects a vehicle ahead and determines that a collision
with the vehicle ahead is unavoidable.
It may also be possible to avoid a collision if the relative speed between your
vehicle and the vehicle ahead is less than about 20 km/h (12 mph).
For details, refer to Section 4, “Smart City Brake Support (SCBS)”.
• Under bad weather condition, such as rain, fog and snow.
• The window washer is being used or the windscreen wipers are not used
when its raining.
• The windscreen is dirty.
• The steering wheel is turned completely left or right, or the vehicle is
accelerated rapidly and comes close to the vehicle ahead.Other details are
described in the related text.
$9@&;&&%@&EJUJPO@2VJDL(VJEFJOEC







Interior Features
23
Temperature control dial Fan control dial Mode selector dial
A/C switch Air intake selector switch Rear window defogger switch
Air-Conditioning System (Fully Automatic Type)
Operation of Automatic Air Conditioning
1. Set the mode selector dial to the AUTO position.
2. Set the air intake selector to the outside air position (indicator light turned off).
3. Set the fan control dial to the AUTO position.
4. Press the A/C switch to operate the air conditioning (turn indicator light on).
5. Set the temperature control dial to the desired position.
6. To turn off the system, set the fan control dial to the 0 position.
For details, refer to Section 5, “Air-Conditioning System”.
$9@&;&&%@&EJUJPO@2VJDL(VJEFJOEC