change key battery MAZDA MODEL CX-7 2008 Owners Manual (in English)

MAZDA MODEL CX-7 2008 Owners Manual (in English) MODEL CX-7 2008 MAZDA MAZDA https://www.carmanualsonline.info/img/28/13905/w960_13905-0.png MAZDA MODEL CX-7 2008 Owners Manual (in English)

Page 84 of 502

MAZDA MODEL CX-7 2008  Owners Manual (in English) Black plate (84,1)
3. Insert a flathead screwdriver into thecrack and press the battery out.
4. Insert the new battery (CR2025 or
equivalent) with the positive pole (
)
facing the (
) mark on the cap.

Page 95 of 502

MAZDA MODEL CX-7 2008  Owners Manual (in English) Black plate (95,1)
lThe start knob has not been returned to
the LOCK position.
lThe auxiliary key is inserted into the
ignition switch.
qAdvanced Key Battery Dead
Warning
When the start knob is return

Page 96 of 502

MAZDA MODEL CX-7 2008  Owners Manual (in English) Black plate (96,1)
Setting Change (Function Customization)
The following function settings are possible. These settings can only be changed by an
Authorized Mazda Dealer.
SettingFunctionAt Initial Set

Page 102 of 502

MAZDA MODEL CX-7 2008  Owners Manual (in English) Black plate (102,1)
5. Put in the new battery (CR1620 orequivalent) with the positive pole (
)
facing down.
6. Align the front and back covers and snap the transmitter shut.
7. Install the key to the

Page 124 of 502

MAZDA MODEL CX-7 2008  Owners Manual (in English) Black plate (124,1)
Immobilizer System (with
Advanced Key)
The immobilizer system allows the engine
to start only with an advanced key the
system recognizes.
If someone attempts to start the engine
wi

Page 203 of 502

MAZDA MODEL CX-7 2008  Owners Manual (in English) Black plate (203,1)
NOTE
The advanced key can be set so that the KEY
indicator light (green) does not flash even if
the battery power is low.
Refer to Setting Change (Function
Customization)(page 3-18