tow MAZDA MODEL CX-9 2011 Smart Start Guide (in English)

34
To Program the Driver’s Seat Position
1 Park the vehicle.
2
Adjust the seat to the desired position using the slide/tilt and
recline switches.
3
Push the memor y seat SET button followed by one of the programming
buttons (1-3) until a beep is heard. Programming is now complete.
Program the remaining two buttons as desired.

n OTE: You can also program a seat position for each advanced key/retractable type
key used with the vehicle. See Owner’s Manual for programming instructions.
To Move the Seat to a Programmed Position
1 Shif t the selector lever to the P position.
2
Push the programming button (1-3) that you selected when
programming your seat position.
Seats
ELECTRO nICALL y OPERATED SEAT W/MEMOR y
Slide/ Tilt Switch
Seat can be moved back
and for th, raised, lowered,
or tilted with this control.
Lumbar Switch
Push for ward or backward to increase or
decrease lumbar suppor t.
Recline Switch
Push
for ward or backward
to adjust seatback angle.
Memor y Seat Switch
1 Open lif tgate.
2 Lower head restraints.

3 Pull each strap on the rear of
the seat while pushing the lef t
and right seat for ward to lay flat.
To Return to the Original Position

Pull the strap to return the seatback to the original position.
Th IRD -ROW SEAT ACCESS
•
Pull the third-row seat access lever on the
side of the second-row seatback to fold
and slide the seat for ward to access
third-row seating.
•
Return the second-row seatback to the
normal upright position by pulling up on
the seatback until it locks into place.
•
Slide the second-row seat for ward or back
for proper legroom using the lever under
the front of the seat.
S ECO nD R OW SEAT BACK RECLI nE
To recline the seatback, lean for ward slightly while folding lever. Then lean
back to the desired position and release the lever.
F OLDI nG T h E S ECO nD -R OW SEATS
1 Unfasten the lap por tion of the center-rear seat belt.
2 Slide seat all the way back toward rear of vehicle.
3 Lower head restraints.
4 Pull the seatback folding lever and fold the seatback for ward.
S PLIT FOLDI nG Th IRD -ROW SEAT
To create a flat luggage compar tment
space, fold the seatbacks for ward.
Third-row seat
access lever
Seatback folding
lever
Straps
www.MazdaUSA.com
280345_11a_Mazda_CX-9_SSG_081010.indd 4-58/10/10 2:05 PM

Feature Highlights
910
LIGhTI nG CO nTROL / TUR n SIG nAL LEVERWI nDS hIELD/REAR WI nDOW WIPER/WAS hER CO nTROL LEVER
Pull
to Flash
h igh Beams Push for

h igh Beams
AUTO: The rain sensor senses the amount of rainfall and turns the
wipers on or of f. Rotate inner ring away from you (clockwise) for less
sensitivity (requires more rain to turn wipers on) and towards you
(counterclockwise) for more sensitivity (requires less rain to turn wipers on).
CAUTIO n: When the ignition is ON turn the AUTO wipers OFF when
going through a car wash, or while cleaning or touching the windshield.AUTO: The light sensor
automatically determines
when to turn the headlights
on or of f.
:
Turns tail, parking, dashboard,
and headlights on.
:
Turns fog lights
on only when
headlights
are on.: Turns tail,
parking, and
dashboard
lights on.
n OTE: Vehicles not e quipped with AUTO
wipers will have INT wipers. Set the lever to INT
and choose an inter val timing by rotating the
ring between fast and slow.
h EADLIG hT LEVELI nG
Adjust headlight
angle with headlight
leveling switch
depending on vehicle
passengers & load
(example: Driver only
= 0, Driver + Passengers = 1 or
2, etc.). Refer to your Owner’s
Manual for complete details.
Pull lever to dispense
windshield washer fluid More sensitive
Less sensitive
1
2
3h
I
LO AUTO
OFF
MIST
Rear Window

Wiper/ Washer
I n T: Intermittent
O n: Normal speed
: W ashe r/wiper
(hold as desired)
www.MazdaUSA.com
280345_11a_Mazda_CX-9_SSG_081010.indd 10-118/10/10 2:06 PM