instrument cluster MAZDA MODEL CX-9 2016 (in English) Owner's Guide

4–30
When Driving
Instrument Cluster and Display
The active driving display indicates the following information:  y Blind Spot Monitoring (BSM) Operation Conditions and Warnings 
 Refer to Blind Spot Monitoring (BSM) on page 4-92 . 



y Distance Recognition Support System (DRSS) Operation Conditions and Warnings
 Refer to Distance Recognition Support System (DRSS) on page 4-98 . 



y Mazda Radar Cruise Control (MRCC) Operation Conditions and Warnings
 Refer to Mazda Radar Cruise Control (MRCC) on page 4-106 . 



y Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) Operation
Conditions and Warnings
  Refer to Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) on
page 4-117 .




y Smart City Brake Support (SCBS) Warnings
 Refer to Smart City Brake Support (SCBS) on page 4-129 . 



y Smart Brake Support (SBS) Operation Conditions and Warnings
 Refer to Smart Brake Support (SBS) on page 4-134 . 



y Cruise Control Operation Conditions
 Refer to Cruise Control on page 4-147 . 



y Navigation Guidance (vehicles with navigation system) 



y Speed limit indicator (vehicles with navigation system) 



y Tachometer 

y Vehicle Speed
Each setting/adjustment for the active driving display can be performed on the center display.
1. Select the icon on the home screen and display the Settings screen.
2. Select the AD-Disp tab.
3. Select the desired item and perform the setting/adjustment.
 

y
 Method for adjusting screen brightness (automatically/manually)


y
 Screen brightness initial settings (automatic adjustment is selected)


y
 Screen brightness adjustment (manual adjustment is selected)


y
 Display position of active driving display (display height)y Active driving display angle adjustment (display angle correction)
y
 Turn by turn (TBT) display/non-display (navigation guidance)

y Street name display timing can be changed (navigation guidance) 

y Tachometer display/non-display 


y
 Active driving display ON/OFF (indication)


y
 Reset settings (reset)
$9@'%&"#@&EJUJPOJOEC


$9@'%&"#@&EJUJPOJOEC










4–31
When Driving
Instrument Cluster and Display
N O T E
The desired driving position (display position, brightness level, display information) can be
called up after programming the position.
Refer to Driving Position Memory on page 2-8 .

$9@'%&"#@&EJUJPOJOEC


$9@'%&"#@&EJUJPOJOEC










4–32
When Driving
Instrument Cluster and Display
Warning/Indicator Lights
Instrument Cluster varies depending on model and speci¿ cations.

Center of Dashboard
Warning/Indicator lights will appear in any of the highlighted areas Instrument Cluster
Type A
(With Multi-information Display)
(Without Multi-information Display) Type B

$9@'%&"#@&EJUJPOJOEC


$9@'%&"#@&EJUJPOJOEC










4–33
When Driving
Instrument Cluster and Display
*Some models.
Warning Indication/Warning Lights
These lights turn on or À ash to notify the user of the system operation status or a system
malfunction.

Signal Warning Page

Brake System Warning Indication/Warning Light *1*2 7-30

ABS Warning Light *1 Electronic
Brake Force
Distribution
System Warning
7-30 ,
ABS warning
7-33

Charging System Warning Indication/Warning Light *1 7-30

Engine Oil Warning Light *1 7-30


(Red) * High Engine Coolant Temperature Warning Indication/Warning Light *1 7-30

Power Steering Malfunction Indication/Malfunction Indicator Light *1 7-30

* Master Warning Indication/Warning Light *1 7-33

Electric Parking Brake Warning Indication/Warning Light 7-33

* Engine Oil Level Warning Indication 7-33

Check Engine Light *1 7-33

Automatic Transaxle Warning Indication/Warning Light *1 7-33

* AWD Warning Indication/Warning Light *1 7-33

Air Bag/Front Seat Belt Pretensioner System Warning Light *1 7-33
$9@'%&"#@&EJUJPOJOEC


$9@'%&"#@&EJUJPOJOEC










4–34
When Driving
Instrument Cluster and Display
*Some models.
Signal Warning Page

* Tire Pressure Monitoring System Warning Light *1 Flashing
7-33 ,
Illuminate
7-38


(Amber) * KEY Warning Indication 7-33


(Red) * KEY Warning Light *1 Malfunction
7-33 ,
Except
malfunction
7-38

(Amber)
* High Beam Control System (HBC) Warning Indication/Warning Light *1 7-33

* Blind Spot Monitoring (BSM) Warning Indication/Warning Light *1 7-33


(Amber) * Mazda Radar Cruise Control (MRCC) Warning Indication 7-33


(Amber) * Lane-keep Assist System (LAS) & Lane Departure Warning System
(LDWS) Warning Indication 7-33

LED Headlight Warning Light 7-33

(Amber)
* Smart Brake Support/Smart City Brake Support (SBS/SCBS) Warning
Indication 7-38

Low Fuel Warning Indication/Warning Light 7-38

* Check Fuel Cap Warning Indication/Warning Light *1 7-38

Seat Belt Warning Light 7-38

Engine Oil Level Warning Light 7-38
$9@'%&"#@&EJUJPOJOEC


$9@'%&"#@&EJUJPOJOEC










4–35
When Driving
Instrument Cluster and Display
*Some models.
Signal Warning Page

* Low Washer Fluid Level Warning Indication/Warning Light 7-38


* Door-Ajar Warning Indication 7-38


* Liftgate-Ajar Warning Indication 7-38

* Door-Ajar Warning Light 7-38
*1 The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or
when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an
Authorized Mazda Dealer.
*2 The light turns on continuously when the parking brake is applied.


$9@'%&"#@&EJUJPOJOEC


$9@'%&"#@&EJUJPOJOEC










4–36
When Driving
Instrument Cluster and Display
*Some models.
Indication/Indicator Lights
These lights turn on or À ash to notify the user of the system operation status or a system
malfunction.

Signal Indicator Page

Front Passenger Air Bag Deactivation Indicator Light *1 2-65


(White/Green) KEY Indication/Indicator Light 4-5

Security Indicator Light *1 3-47

Wrench Indication/Indicator Light *1 4-38


(Blue) * Low Engine Coolant Temperature Indicator Light 4-38

Shift Position Indication 4-42

Lights-On Indication/Indicator Light 4-49

Headlight High-Beam Indicator Light Headlight High-Low
Beam
4-53 ,
Flashing the Headlights
4-53

Turn Signal/Hazard Warning Indicator Lights Turn and Lane-Change
Signals
4-55 ,
Hazard Warning Flasher
4-62

Brake Pedal Operation demand Indicator Light 4-68

TCS/DSC Indicator Light *1 (Flashes)
Traction Control System
(TCS)
4-74 ,
Dynamic Stability
Control (DSC)
4-76
(Turns on)
7-33
$9@'%&"#@&EJUJPOJOEC


$9@'%&"#@&EJUJPOJOEC










4–37
When Driving
Instrument Cluster and Display
*Some models.
Signal Indicator Page

TCS OFF Indicator Light
*1 4-75


Select Mode Indication 4-81


(Green) * High Beam Control System (HBC) Indicator Light 4-91


(White) * Mazda Radar Cruise Control (MRCC) Main Indication 4-110


(Green) * Mazda Radar Cruise Control (MRCC) Set Indication 4-110


(White/Green) * Lane-keep Assist System (LAS) & Lane Departure Warning
System (LDWS) Indication 4-121


* Smart City Brake Support (SCBS) Indication 4-133


* Smart Brake Support/Smart City Brake Support (SBS/SCBS) OFF
Indicator Light *1 Smart City Brake
Support (SCBS) System
4-133 ,
Smart Brake Support
(SBS) System
4-136


(White) * Cruise Main Indication 4-148


(Green) * Cruise Set Indication 4-148
*1 The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or
when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an
Authorized Mazda Dealer.

$9@'%&"#@&EJUJPOJOEC


$9@'%&"#@&EJUJPOJOEC










4–38
When Driving
Instrument Cluster and Display
*Some models.
Wrench Indicator Light *

When the ignition is switched ON, the
wrench indicator light is illuminated and
then turns off after a few seconds.

The wrench indicator light turns on under
the following conditions:
 


y When the preset maintenance period has
arrived.
 


y When its time to replace the engine oil.

Refer to Maintenance Monitor on page
6-19 .
Low Engine Coolant Temperature
Indicator Light (Blue) *

The light illuminates continuously when
the engine coolant temperature is low and
turns off after the engine is warm.

$9@'%&"#@&EJUJPOJOEC


$9@'%&"#@&EJUJPOJOEC










4–41
When Driving
Automatic Transaxle
Transaxle Ranges
 












y The shift position indicator light in the
instrument cluster illuminates. Refer
to Warning/Indicator Lights on page
4-32 .
 


y The selector lever must be in P or N to
operate the starter.

P (Park)
P locks the transaxle and prevents the front
wheels from rotating.
WARNING
Always set the selector lever to P and set
the parking brake:
Only setting the selector lever to the
P position without using the parking
brake to hold the vehicle is dangerous.
If P fails to hold, the vehicle could move
and cause an accident.

CAUTION
 


¾ Shifting into P, N or R while the vehicle is
moving can damage your transaxle.
 


¾ Shifting into a driving gear or reverse
when the engine is running faster than
idle can damage the transaxle.

R (Reverse)
In position R, the vehicle moves only
backward. You must be at a complete
stop before shifting to or from R, except
under rare circumstances as explained in
Rocking the Vehicle (page 3-52 ).
N O T E
(With parking sensor system)
When the selector lever is shifted to the R
position with the ignition switched ON, the
parking sensor system is activated and a
beep sound is heard.
Refer to Parking Sensor System on page
4-164 .

N (Neutral)
In N, the wheels and transaxle are not
locked. The vehicle will roll freely even
on the slightest incline unless the parking
brake or brakes are on.
WARNING
If the engine is running faster than idle,
do not shift from N or P into a driving
gear:
It's dangerous to shift from N or P
into a driving gear when the engine
is running faster than idle. If this is
done, the vehicle could move suddenly,
causing an accident or serious injury.

Do not shift into N when driving the
vehicle:
Shifting into N while driving is
dangerous. Engine braking cannot
be applied when decelerating which
could lead to an accident or serious
injury.

CAUTION
Do not shift into N when driving the
vehicle. Doing so can cause transaxle
damage.

$9@'%&"#@&EJUJPOJOEC


$9@'%&"#@&EJUJPOJOEC