engine coolant MAZDA MODEL CX-9 2019 (in English) Owner's Guide
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2019, Model line: MODEL CX-9, Model: MAZDA MODEL CX-9 2019Pages: 692
Page 520 of 692

NOTE
Changing the coolant should be done by
an Authorized Mazda Dealer.
Inspect the antifreeze protection and
coolant level in the coolant reservoir at
least once a year―at the beginning of the
winter season―and before traveling where
temperatures may drop below freezing.
Inspect the condition and connections of
all cooling system and heater hoses.
Replace any that are swollen or
deteriorated.
The coolant should be at full in the
radiator and between the F and L marks on
the coolant reservoir when the engine is
cool.
If it is at or near L, add enough coolant to
the coolant reservoir to provide freezing
and corrosion protection and to bring the
level to F.
Securely tighten the coolant reservoir tank
cap after adding coolant.
CAUTION
Radiator coolant will damage paint.
Rinse it off quickly if spilled.
If the “FL22” mark is shown on or near
the cooling system cap, use of FL-22 is
recommended when replacing engine
coolant. Using engine coolant other than
FL-22 may cause serious damage to the
engine and cooling system.
If the coolant reserv oir is empty or new
coolant is required frequently, consult an
Authorized Mazda Dealer.
Maintenance and Care
Owner Maintenance
6-26
CX-9_8HB2-EA-18G_Edition1 2018-5-11 13:09:27
Page 556 of 692

Rinse the wheels thoroughly with
lukewarm or cold water. Also, be sure to
clean the wheels after driving on dusty
or salted roads to help prevent
corrosion.
Avoid washing your vehicle in an
automatic car wash that uses high-speed
or hard brushes.
▼ Plastic Part Maintenance
When cleaning the plastic lenses of the
lights, do not use gasoline, kerosene,
rectified spirit, paint, thinner, highly
acidic detergents, or strongly alkaline
detergents. Otherwise, these chemical
agents can discolor or damage the
surfaces resulting in a significant loss in
functionality. If plastic parts become
inadvertently exposed to any of these
chemical agents, flush with water
immediately.
If plastic parts s
uch as the bumpers
become inadvertently exposed to
chemical agents or fluids such as
gasoline, oil, engine coolant, or battery
fluid, it could cause discoloration,
staining, or paint peeling. Wipe off any
such chemical agents or fluids using a
soft cloth immediately.
High water temperature and high water
pressure car washers are available
depending on the type of high pressure
car washer device. If the car washer
nozzle is put too close to the vehicle or
aimed at one area for an extended period
of time, it could defo rm plastic parts or
damage the paint.
Do not use wax containing compounds
(polish). Otherwise, it could result in
paint damage.
In addition, do not use an electrical or
air tool to apply wax. Otherwise, the
frictional heat generated could result in
deformation of plast ic parts or paint
damage.
Maintenance and Care
Appearance Care
6-62
CX-9_8HB2-EA-18G_Edition1 2018-5-11 13:09:27
Page 583 of 692

Overheating
If the temperature gauge indicates
overheating or the high engine coolant
temperature warning light turns on, the
vehicle loses power, or you hear a loud
knocking or pinging noise, the engine is
probably too hot.
WA R N I N G
Pull over to a safe location, then switch
the ignition off and make sure the fan is
not running before attempting to work
near the cooling fan:
Working near the cooling fan when it is
running is dangerous. The fan could
continue running indefinitely even if the
engine has stopped and the engine
compartment temperature is high. You
could be hit by the fan and seriously
injured.
Do not remove either cooling
system cap when the engine and radiator
are hot:
When the engine and radiator are hot,
scalding coolant and steam may shoot out
under pressure and cause serious injury.
Open the hood ONLY after steam is no
longer escaping from the engine:
Steam from an overheated engine is
dangerous. The escaping steam could
seriously burn you.
If the temperature gauge indicates
overheating or the high engine coolant
temperature warning light turns on:
1. Drive safely to the side of the road and park off the right-of-way.
2. Shift into park (P).
3. Apply the parking brake.
4. Turn off the air conditioner.
5. Check whether coolant or steam is escaping from the engine
compartment.
If steam is coming from the engine
compartment:
Do not go near the front of the vehicle.
Stop the engine.
Wait until the steam dissipates, then
open the hood and start the engine.
If neither coolant nor steam is
escaping:
Open the hood and idle the engine
until it cools.
CAUTION
If the cooling fan does not operate
while the engine is running, the engine
temperature will increase. Stop the
engine and call an Authorized Mazda
Dealer.
6. Make sure the cooling fan is operating, then turn off the engine after the
temperature has decreased.
7. When cool, check the coolant level.
If Trouble Arises
Overheating
7-23
CX-9_8HB2-EA-18G_Edition1 2018-5-11 13:09:27
Page 584 of 692

If it is low, look for coolant leaks from
the radiator and hoses.
If you find a leak or other damage, or if
coolant is still leaking:
Stop the engine and call an Authorized
Mazda Dealer.
Cooling system cap
Coolant reservoir
Cooling fan
If you find no problems, the engine is
cool, and no leaks are obvious:
Carefully add coolant as required (page
6-25).
CAUTION
If the engine continues to overheat or
frequently overheats, have the cooling
system inspected. The engine could be
seriously damaged unless repairs are
made. Consult an Authorized Mazda
Dealer.
If Trouble Arises
Overheating
7-24
CX-9_8HB2-EA-18G_Edition1 2018-5-11 13:09:27
Page 590 of 692

SignalWarning
Charging System Warn‐
ing Indication/Warning
Light If the warning light illuminates while driving, it indicates a
malfunction of the alter‐
nator or of the charging system.
Drive to the side of the road and park off the right-of-way. Co nsult an Authorized
Mazda Dealer.
CAUTION
Do not continue driving when the charging system warning light is illuminated be‐
cause the engine could stop unexpectedly.
Engine Oil Warning Light This warning light indicates low engine oil pressure.
CAUTION
Do not run the engine if the oil pressure is
low. Otherwise, it could result in extensive
engine damage.
If the light illuminates or the w arning indication is displayed while driving:
1. Drive to the side of the road and park off the right-of-way o n level ground.
2. Turn off the engine and wait 5 minutes for the oil to drain b ack into the oil pan.
3. Inspect the engine oil level (p age 6-24). If it's low, add the appropriate amount of
engine oil while being careful not to overfill.
CAUTION
Do not run the engine if the oil level is low. Otherwise, it could result in extensive
engine damage.
4. Start the engine and check the warning light.
If the light remains illuminated even though the oil level is normal or after adding oil,
stop the engine immediately and have your vehicle towed to an Authorized Mazda
Dealer.
(Red)
High Engine Coolant
Temperature Warning Indication/Warning Light The light flashes when the engine
coolant temperature is extremely high, and illumi‐
nates when the engine coolant temperature increases further.
Handling Procedure
Flashing light
Drive slowly to reduce engine load until you can find a safe pl ace to stop the vehicle
and wait for the engine to cool down.
Illuminated light
This indicates the possibility of overheating. Park the vehicle in a safe place immedi‐
ately and stop the engine.
Refer to Overheating on page 7-23.
CAUTION
Do not drive the vehicle with the high engine coolant temperature warning light illumi‐
nated. Otherwise, it could resu lt in damage to the engine.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-30
CX-9_8HB2-EA-18G_Edition1 2018-5-11 13:09:27
Page 603 of 692

Message Indicated on Display
If a message is displayed in the center display, take appropriate action (in a calm manner)
according to the displayed message.
(Display example)
▼ Stop Vehicle in Safe Place Immediately
If the following messages are displayed in the center display ,
a vehicle system may be
malfunctioning. Stop the vehicle in a safe place and contact an Authorized Mazda Dealer.
DisplayIndicated Condition
Displays if the engine coolant temperature has increased excess ively.
Displays if the charging system has a malfunction.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-43
CX-9_8HB2-EA-18G_Edition1 2018-5-11 13:09:27
Page 605 of 692

Message Indicated in Multi-information Display*
If there is a notification from the vehicle, a message is displayed in the multi-information
display. Check the information and take the necessary action.
(Display example) Instrument Cluster
Type A
Type B
If the warning light turns on/fla shes simultaneously or a symbol is indicated in the display,
check the information regarding the warning light or symbol.
Refer to If a Warning Light Turns On or Flashes on page 7-28.
Display Content Action to be taken
Indicated when the push button start is
pressed while the selector lever is not in
the P position. Shift the selector lev
er to the P position.
Indicated when the push button start is
pressed without depressing the brake
pedal. Depress the brake pedal and press the
push button start.
Indicates when the Electric Parking
Brake (EPB) switch is operated without
depressing the brake pedal.Operate the Electric Parking Brake
(EPB) switch while depressing the brake
pedal.
Indicated when the engine coolant tem‐
perature is high or the engine is hot, and
the engine output is limited.Drive slowly and make sure that the in‐
dication turns off.
If the indication does not turn off, con‐
sult an Authorized Mazda Dealer.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.7-45
CX-9_8HB2-EA-18G_Edition1
2018-5-11 13:09:27
Page 666 of 692

Specifications
▼Engine
Item
Specification
Type DOHC-16V in-line, 4-cylinder
Bore × Stroke 89.0 × 100 mm (3.50 × 3.94 in)
Displacement 2,488.5 ml (2,488.5 cc)
Compression ratio 10.5
▼Electrical System
Item
Classification
Battery 12V-60Ah/20HR or 12V-65Ah/20HR
Spark-plug number Mazda Genuine spark plug
*1PY8V-18-110
*1 The spark plugs provide the SKY ACTIV-G its optimum performance. Consult an Authorized Mazda Dealer
for details.
CAUTION
When cleaning the iridium plugs, do not use a wire brush. The fine particulate coating on the
iridium alloy and platinum tips could be damaged.
▼ Lubricant Quality
Lubricant
Classification
Engine oil Refer to Recommended Oil on page 6-23.
Coolant FL-22 type
Automatic transaxle fluid Mazda Genuine ATF FZ
Transfer case oil Mazda Long Life Hypoid Gear Oil SG1
Rear differential oil Mazda Long Life Hypoid Gear Oil SG1
Brake fluid SAE J1703 or FMVSS116 DOT-3
NOTE
Refer to Introduction on (page 6-2) for owner's responsibility in protecting your investment.
▼Capacities
(Approximate Quantities)
Item
Capacity
Engine oil With oil filter replacement
4.8 L (5.1 US qt, 4.2 Imp qt)
Without oil filter replacement 4.6 L (4.9 US qt, 4.0 Imp qt)
Specifications
Specifications
9-4
CX-9_8HB2-EA-18G_Edition1 2018-5-11 13:09:27
Page 684 of 692

Index
EngineCoolant.........................................6-25
Engine compartment overview.... 6-22
Exhaust gas.................................. 3-28
Hood release............................ .... 6-20
Oil................................................ 6-23
Starting...........................................4-5
Essential Information.......................... 6-2
Event Data Recorder......................... 8-21
Exhaust Gas...................................... 3-28
Exterior Care..................................... 6-57 Aluminum wheel maintenance.... 6-61
Bright-metal maint enance........... 6-60
Maintaining the finish................. 6-58
Plastic part maintenance.............. 6-62
F
Flasher Hazard warning........................... 4-80
Headlights.................................... 4-68
Flat Tire............................................... 7-3 Mounting the spare tire............... 7-14
Removing a flat tire...................... 7-9
Floor Mat.......................................... 3-49
Fluid Brake............................................6-27
Washer......................................... 6-27
Fluids Classification................................. 9-4
Fog Lights......................................... 4-73
Foot Brake.........................................4-89
Forward Sensing Camera (FSC)..... 4-192
Front Seat............................................ 2-5
Fuel Filler lid and cap......................... 3-30
Requirements............................... 3-27
Tank capacity.................................9-4
Fuel Consumption Display............... 4-99
Fuel Economy Monitor..................... 4-99 Ending screen display............... 4-100
Fuel consumption display............4-99
Fuses.................................................. 6-50 Panel description......................... 6-53
Replacement................................ 6-50
G
Gauges............................................... 4-11
Glove Compartment........................ 5-101
H
Hazardous Driving............................ 3-48
Hazard Warning Flasher....................4-80
HeadlightsComing home light......................4-71
Control......................................... 4-68
Headlight flashing....................... 4-71
High-low beam............................ 4-71
Leaving home light..................... 4-71
Leveling....................................... 4-72
Head Restraint................................... 2-21
High Beam Control System
(HBC).............................................. 4-111 High Beam Control System (HBC)
indicator light (green)................ 4-112
Hill Launch Assist (HL A)................ 4-93
HomeLink Wireless Control System
(Type A)............................................ 4-81
HomeLink Wireless Control System
(Type B)............................................ 4-84
Hood Release............. ....................... 6-20
Horn...................................................4-80
I
If a Warning Light Turns On or
Flashes............................................... 7-28
If the Active Driving Display Does Not
Operate.............................................. 7-52
Ignition
Switch............................................ 4-4
10-4
CX-9_8HB2-EA-18G_Edition1 2018-5-11 13:09:27
Page 685 of 692

Index
Ignition Not Switched Off (STOP)
Warning Beep.................................... 7-47
Illuminated Entry System................. 5-96
Immobilizer System.......................... 3-43
Inspecting Brake Fluid Level............ 6-27
Inspecting Coolant Level.................. 6-25
Inspecting Engine Oil Level............. 6-24
Inspecting Washer Fluid Level......... 6-27
Instrument Cluster...... ....................... 4-11
Instrument Cluster (Type A)........4-12
Instrument Cluster (Type B)........4-29
Instrument Cluster (Type C)........4-45
Instrument Cluster (Type A)............. 4-12
Average Fuel Economy............... 4-20
Blind Spot Monitoring (BSM)
Display......................................... 4-20
Compass Display......................... 4-21
Cruise Control Set Vehicle Speed
Display......................................... 4-21
Current Fuel Econo my................ 4-20
Dashboard Illumina tion............... 4-18
Distance Recognition Support System
(DRSS) Display........................... 4-21
Distance-to-empty....................... 4-19
Engine Coolant Temperature
Gauge........................................... 4-16
Fuel Gauge.................................. 4-17
Indication/Indicator Lights.......... 4-25
Lane-keep Assist System (LAS) &
Lane Departure Warning System
(LDWS) Display..........................4-21
Maintenance Monitor.................. 4-20
Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function) D isplay.......4-21
Multi-information Display (Type
A)................................................. 4-13
Odometer..................................... 4-16
Outside Temperature Display...... 4-19
Speedometer................................ 4-12
Speed Unit Selector..................... 4-18Tachometer.................................. 4-12
Trip Meter....................................4-16
Warning Indication/Warning
Lights........................................... 4-23
Warning (Display Indication)...... 4-22
Instrument Cluster (Type B)............. 4-29 Average Fuel Economy............... 4-36
Blind Spot Monitoring (BSM)
Display......................................... 4-36
Compass Display......................... 4-37
Cruise Control Set Vehicle Speed
Display......................................... 4-37
Current Fuel Econo my................ 4-36
Dashboard Illumina tion............... 4-34
Distance Recognition Support System
(DRSS) Display........................... 4-37
Distance-to-empty....................... 4-35
Engine Coolant Temperature
Gauge........................................... 4-32
Fuel Gauge.................................. 4-33
Indication/Indicator Lights.......... 4-41
Lane-keep Assist System (LAS) &
Lane Departure Warning System
(LDWS) Display..........................4-36
Maintenance Monitor.................. 4-36
Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function) D isplay.......4-37
Multi-information Display (Type
B)................................................. 4-30
Odometer..................................... 4-32
Outside Temperature Display...... 4-35
Speedometer................................ 4-29
Tachometer.................................. 4-29
Trip Meter....................................4-32
Warning Indication/Warning
Lights........................................... 4-39
Warning (Display Indication)...... 4-37
Instrument Cluster (Type C)............. 4-45 Cruise Control Set Vehicle Speed
Display......................................... 4-51
10-5
CX-9_8HB2-EA-18G_Edition1 2018-5-11 13:09:27