high beam MAZDA MODEL MPV 2001 Quick Tips (in English)

INSTRUMENT CLUSTER
Always check the Owner’s Manual for more operating information and safety features
GAUGES
1. Coolant temperature
gauge
If above normal range, stop
vehicle and turn off engine;
check coolant level when safe
2. Fuel gauge
18.5-gallon/70-liter tank
3. Speedometer
4. Tachometer
5. Gear indicator
6. Odometer/trip meter
7. Odometer/trip meter
select button
Press to select odometer,
trip A or trip B
Press and hold to reset
selected trip odometer
8. Low fuel level
WARNING LIGHTS
9. Charging system
warning light
Dealer inspection required
10. Low engine oil
pressure warning light
Stop vehicle and turn off
engine; check oil level
11. Check engine
Possible faulty emission control,
dealer inspection required, or
fuel filler cap not tight
12. Cruise control*
13. Anti-lock Brake System
(ABS)*
ABS malfunction, normal brakes
only, dealer inspection required
14. Turn signals/hazard
warning on15. High beams on
16. Door ajar
17. Always fasten
safety belts
18. Brake system
Parking brake on/low
fluid level
19. Air bag readiness
Air bag malfunction, dealer
inspection required
20. Immobilizer system/
security light*
21. Overdrive off indicator,
see Transaxle
Lights when the overdrive
button is in the off position
Instrument
Cluster
Instrument
Cluster
Quick Tips 2001 Mazda MPV page 4
page 5
Revised January 9, 2001
x1000r/min
0 1 234
5
6
7
8
H
CF
E
10911127218
14144121516
13
17
18
19
20
0 10 20 30405060
70
80
90
100
110
120
200
0 20 406080100
120
140
160
180mph
km/h
3
TRIP
ODOA88888.8BPRND21
65
*Denotes optional equipment

DRIVER CONTROLS
Always check the Owner’s Manual for more operating information and safety features
Driver
Controls
Transaxle
Quick Tips 2001 Mazda MPV page 6
page 7
Revised January 9, 2001
Turn signal/lighting
control lever
OFF = Lights off
= Tail, parking and dashboard
lights on: Rotate knob (1)
to first notch
= Tail, parking, dashboard
and head lights on: Rotate
knob (1) to second notchHigh beams on/off: Push lever
forward to detent/pull back
to detent
To flash high beams: Pull lever
back slightly and release
Turn signals right/left: Move lever
up/down
Wiper/washer control lever
To activate interval wipers:
Push lever down to first
detent and rotate knob (2)
to desired speed
To activate wiper normal or low
speed: Push down to second
detent
To activate high speed: Push
lever down to third detentTo activate washer: Pull
lever back
To activate mist: Push lever
up and release
To activate rear interval wiper:
Rotate knob (3) up to INT
To activate rear normal speed
wiper: Rotate knob (3) up to ON
To activate rear washer: Rotate
knob (3) to and release
Cruise control*
Operates above 25 mph
Press and release main switch (1)
To set speed: Accelerate to desired
speed and move lever (2) down
and release
To decelerate: Move lever (2)
down and release at desired
speed; or tap brake pedal
Move lever (2) down at
desired speed
Incremental deceleration: Move
lever (2) down and release; each
tap = minus 1 mph
Incremental acceleration: Move
lever up and release; each tap =
plus 1 mph To cancel: Tap brake pedal,
pull lever (2) back or press
main switch (1) again
Return to preset speed (after
braking): Move lever (2) up
and release
Automatic transaxle
P = Park
To move gearshift from Park:
Press firmly on brake pedal
R = Reverse
N = Neutral
No gear engaged
D (Overdrive)
For normal driving: Shifts through
four forward gears automaticallyTip: Torque converter lock-up
improves fuel economy and
can feel like an additional gear
D (Overdrive Off)
Press overdrive off switch (3) to
disengage/engage overdrive;
indicator light on instrument
panel will illuminate; shifts
through three forward gears
automatically
Provides extra power and increased
engine braking; stops 3rd-4th
gear cycling in stop/go driving
2 = Second
Provides extra power and
increased engine braking
Use to reduce wheel spin when
starting on slippery surfaces
1 = First
Use for engine braking when
2nd is not sufficient
12
1
3 2
3
*Denotes optional equipment