oil filter MAZDA MODEL MPV 2001 Quick Tips (in English)

Quick Tips 2001 Mazda MPV page 20
page 1
Revised January 9, 2001
MAINTENANCE SCHEDULE
Maintenance notes:
Rotate tires every 3,750 miles
Replace cabin air filter once a
year or every 12,000 miles
†A.Change: Engine oil/replace filter
B.Inspect: Drive belts, fuel lines
and hoses, idle speed, brakelines,
hoses and connections, disc
and drum brakes, steering
operation and linkages, front
suspension ball joints, driveshaft
dust boots, chassis and body
bolts, exhaust system and
heat shields
Replace: Air filter, brake fluid
Lubricate: All locks and hinges
C.Change: Engine coolant
D.Inspect: PVC valve, hoses and
tubes for emission system
Replace: Spark plugs
* Special operating conditions
† See Owner’s Manual
This Quick Tips® guide is provided
by MazdaTown to make your
Mazda ownership experience more
convenient. It is not intended to
replace your Owner’s Manual.
If you have any questions about
your vehicle, you are invited to
contact your local dealer.
Or if you need additional help,
feel free to call our
Customer Assistance Center
at 1-800-222-5500
Monday through Friday,
8 am-5 pm
Tip: For additional service
intervals and complete details,
see Owner’s ManualNORMAL SERVICE INTERVALS
5,000 miles*
7,500 miles
15,000 miles
22,500 miles
30,000 miles
37,500 miles
45,000 miles
52,500 miles
60,000 miles
67,500 miles
75,000 miles
82,500 miles
90,000 miles
A B A
A C A A B D A A C A
A B
A
A A
A
©2001 Calcar, Quick Tips®is a trademark
of Calcar, made in USA 7/00 46M GL
Mazda North American Operations reserves
the right to change product specifications at
any time without incurring obligations.
Reference
Guide for
Controls and
Functions
Get in. Be moved.®
2001
Quick Tips®

UNDER HOOD
Always check the Owner’s Manual for more operating information and safety features
Under Hood
Quick Tips 2001 Mazda MPV page 18
page 19
Revised January 9, 2001
1. Power steering fluid
reservoir
Check with engine off; fill to
MAX mark
2. Engine coolant reservoir
Level should be between F and
L lines when cold
WARNING: Never remove
coolant reserve tank cap
while engine is running or
hot; remove only when safe
Break-in period
First 600 miles: Avoid heavy
braking and acceleration; drive at
varying road and engine speeds
Tip: Follow same procedures
with overhauled engine or
when brakes are replaced
Anti-lock Brake System (ABS)*
When brake pedal is pressed, ABS
automatically reduces hydraulic
pressure to any wheel on the
verge of locking up
You may feel a slight pulsing
of the brake pedal and hear a
clicking noise; this tells you the
ABS is functioning properly;
increase pressure on pedal
for maximum braking
Tips: Maintain constant
pressure on the brake pedal
Do not pump the brakesTire economy and tips
Check pressure at least monthly
when tires are cold
Maintain correct front-end
alignment and tire balance; rotate
tires at 3,750-mile intervals; see
Owner’s Manual for rotation chart
Tire pressure
Decal on the edge of the
driver’s door provides tire
pressure information
Tire chains*
Tire chains can damage aluminum
wheels; use on steel wheels only
Tip: Use only SAE class “S”
chains, install only on rear
tires; install as tightly as
possible and retighten
periodically3. Automatic transaxle
fluid dipstick
Check with engine on at
operating temperature;
fluid level should be within
v-notches on dipstick
4. Brake fluid reservoir
Level should be kept at the
MAX mark on reservoir; fill
with DOT 3 fluid from a
sealed container 5. Air filter
6. Power distribution box
(fuses and relays)
7. Battery
8. Hood latch
Pull hood latch up, open hood
9. Engine oil filler cap
SAE 5W-30 recommended for
all temperatures
10. Engine oil dipstick
Check with engine off and at
operating temperature; do not
fill above MAX line
11. Windshield washer
reservoir
Fill with windshield
washer fluid
8971011
1
2
6
5
432.5-liter 24V V6
Gasoline
Unleaded
regular
87-octane
minimum
18.5-gallon/
70-liter tank
*Denotes optional equipment