maintenance schedule MAZDA MODEL MPV 2003 (in English) User Guide

8-13
Maintenance and Care
Owner Maintenance
Form No. 8R21-EA-02G
2. Only when the engine is cool, remove
the radiator drain plug and drain the
coolant into a suitable container.
3. Flush out the system with running
water.
4. Drain the system completely. Insert
and tighten the plug. Add as much
ethylene-glycol-based coolant and
water as necessary to provide freezing
and corrosion protection.
5. In extremely cold climates, add the
amount recommended in the coolant
manufacturer’s instructions.
6. Run the engine at idle with the cooling
system cap off. Slowly add additional
coolant if necessary.
7. At this point, wait until the engine
reaches normal operating temperature;
then depress the accelerator two or
three times. Add more coolant, if
necessary, until the system is full.
8. Install the cooling system cap. Inspect
all connections for leaks. Inspect the
level in the coolant reservoir one more
time.

Changing Coolant (With Rear
Heater)
Have an Authorized Mazda Dealer change
the coolant according to the Scheduled
Maintenance (page 8-3).

Inspecting Brake Fluid Level
Inspect the fluid level in the reservoir
regularly. It should be kept at MAX.
The level normally drops with
accumulated distance, a condition
associated with wear of brake linings. If it
is excessively low, have the brake system
inspected by an Authorized Mazda
Dealer.
Brake Fluid
J16L_8R21-EA-02G.book Page 13 Saturday, June 8, 2002 11:16 AM

8-18
Maintenance and Care
Owner Maintenance
Form No. 8R21-EA-02G
2. Separate the air cleaner housing and
remove the filter.
3. Wipe inside the air cleaner housing
with a damp cloth.
4. Clean or replace the filter.
5. Install in the reverse order of removal.
Replace the filter according to Scheduled
Maintenance (page 8-3).Contamination of either the windshield or
the blades with foreign matter can reduce
wiper effectiveness. Common sources are
insects, tree sap, and hot wax treatments
used by some commercial car washes.
If the blades are not wiping properly,
clean the window and blades with a good
cleaner or mild detergent; then rinse
thoroughly with clean water. Repeat if
necessary.
Air filterAir cleaner housing
Wiper Blades
Hot waxes applied by automatic car
washes have been known to affect the
cleanability of windows.
To prevent damage to the wiper blades,
don’t use gasoline, kerosene, paint
thinner, or other solvents on or near
them.
CAUTION
CAUTION
J16L_8R21-EA-02G.book Page 18 Saturday, June 8, 2002 11:16 AM

11-4
Index
Form No. 8R21-EA-02G
H
Hazard Warning Flasher .................. 5-37
Hazardous Driving
............................. 4-8
Headlights
Control
...................................... 5-32
Flashing
.................................... 5-32
High-low beams
........................ 5-32
On reminder
.............................. 5-32
Hood Release
................................... 3-24
Horn
................................................. 5-37
I
Ignition
Keys
............................................ 3-2
Switch
......................................... 5-2
Illuminated Entry System
................ 6-41
Immobilizer System
......................... 3-27
Indicator Lights
................................ 5-23
Cruise set
.................................. 5-30
Headlight high-beam
................ 5-29
O/D OFF
................................... 5-29
Security
..................................... 5-29
Shift position
............................ 5-30
TCS
........................................... 5-30
TCS OFF
.................................. 5-30
Instrument Cluster
........................... 5-19
Interior Care
..................................... 8-43
Interior Lights
.................................. 6-41
J
Jump-Starting ................................... 7-17
K
Keyless Entry System ........................ 3-3
Keys
................................................... 3-2
L
Label Information ............................ 10-2
Lane-Change Signals
....................... 5-33
Liftgate
............................................. 3-18
Light Bulbs
Replacement
.............................. 8-27
Specifications
............................ 10-6
Lighter
.............................................. 6-44
Lighting Control
............................... 5-32
Lubricant Quality
............................. 10-4
Luggage Compartment Light
........... 6-43
M
Maintenance
Introduction
................................. 8-2
Owner maintenance
precautions
.................................. 8-7
Owner maintenance schedule
..... 8-6
Scheduled
.................................... 8-3
Map Lights
....................................... 6-43
Meters and Gauges
........................... 5-19
Mirrors
Outside mirrors
......................... 3-31
Rearview mirror
........................ 3-32
Money-Saving Suggestions
................ 4-7
O
Odometer and Trip Meter ................ 5-20
Outside Mirrors
................................ 3-31
Overhead Console
............................ 6-48
Overhead Lights
............................... 6-42
Overheating
...................................... 7-15
Overloading
...................................... 4-11
J16L_8R21-EA-02G.book Page 4 Saturday, June 8, 2002 11:16 AM