child lock MAZDA MODEL MPV 2004 Quick Tips (in English)
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2004, Model line: MODEL MPV, Model: MAZDA MODEL MPV 2004Pages: 14, PDF Size: 1.25 MB
Page 8 of 14

\bWITCHE\b/LOCK\b
Always check the Owner’s Manual for more operating information and safety features
\bwitches/Locks
Locks
Quick Tips 2004 Mazda MPV page 14page 15
Power window switches
Ignition switch must be in ON position
All windows controlled from the
driver’s armrest; passenger doors
have separate switches
Driver’s window
One-touch-down: Push down
AUTO switch (3) firmly and release,
window goes down all the way; pull
switch back briefly to stop; press
lightly and hold for normal operation
Child-safety locks
Located on the front edge of
rear doors
To activate: Push tab (3) down;
door opens from outside only
To cancel: Pull tab up
WARNING: Since children
may access either rear door,
child-safety locks for both rear
doors should be activated
Passenger window switches
Push switch ( 4) down and hold to
open; pull back and hold to close
Power window lockout switch
Press button ( 5) down until clicks,
only driver’s window operates;
press again and passenger
windows function again
Master front door lock switch
To lock/unlock all doors: Press
front/rear of switch ( 6)
To lock doors without key: With
door open, press front of switch
( 6 ), exit vehicle, close doors
To lock/unlock with key: Turn
key in driver’s door clockwise/
counterclockwise
Tip: Doors can be locked
with key in ignition (chime
sounds to alert you that
key is in ignition)
2
Key
Operates ignition and all locks
Tip: Use key number plate
to purchase a new key; store
in safe place separate
from vehicle
Immobilizer system*
Prevents engine from starting
unless coded key used; see
Owner’s Manual
Remote Keyless Entry
System*,
see Getting Started
Door lock buttons
1. Front door lock buttons
To lock: Press front of
lock button
To unlock: Pull lock button out
2. Sliding door lock buttons
To lock: Push button down
To unlock: Pull button up
Power remote outside
mirrors*
Ignition switch must be in ACC
or ON position
To adjust left/right mirror:
Slide selector switch (
1) left/right,
press perimeter switch ( 2) in
direction of desired mirror
movement
Tip: To lock mirrors in place,
move switch (1) to center position
1
3
*Denotes optional equipment
1
2
AU TO
3
5
4
6
Page 9 of 14

82
3
1
5
4
\bEAT\b
Always check the Owner’s Manual for more operating information and safety features
\beats
\beats
Quick Tips 2004 Mazda MPV page 16 page 17
Manual seat controls1. Fore-aft adjustment Lift lever, slide seat
2. Head restraint To raise/lower: Pull up/push
stop-catch ( 8) and push down
3. Seatback angle To adjust: Lift and hold lever, lean
forward or backward, release lever
4. Seat tilt (Driver’s only)* Rotate front/rear dial to change
angle of seat front/rear
5. Lumbar adjustment
Power driver’s seat controls 6. Fore/aft adjustment Slide switch horizontally
Raise/lower seat cushion
Pull/push center vertically
Raise/lower front of seat
Pull/push front vertically
Raise/lower rear of seat
Pull/push rear vertically
7. Seatback angle Press front/rear of switch
WARNINGS: Do not adjust
seats while driving
Safety belts must always be
worn when vehicle is in motion
All air bags are supplemental and
do not replace safety belt usage
Always wear your safety belt
and properly secure children
12 and under in a rear seat
Use age appropriate child
restraints and safety seats, see
Owner’s Manual and state or
province laws
Never place rear-facing infant-
safety seat in front of any air
bag, an infant is in serious
danger of being injured or killed
If you must install a
forward-facing child-safety
seat in the front seating
position, move vehicle seat
as far back as possible Front passenger seat
side table
Pull up to locked position; push
down to verify table is secure
Expand table rearward
by pulling out the rear
Lowering side
table: Pull lever
(
2 ) under table
frontal section
and fold down
completely
WARNING: Do not use front
passenger seat side table
while vehicle is in motion
Shoulder belt
height
adjustment
To raise/lower
belt: Push button
( 1 ) and move belt
to desired position
WARNINGS: Make sure adjuster
locks in one of its positions
Removing and reinstalling
front seats for modification
purposes is dangerous and
may compromise the air
bag system
1
2
*Denotes optional equipment
82
5
67
Page 10 of 14

\bEAT\b
Always check the Owner’s Manual for more operating information and safety features
\beats
Child-safety \beats
Quick Tips 2004 Mazda MPV page 18
page 19
*Denotes optional equipment
Child-safety seat
To install in rear outboard seats:
Use dual locking mode retractor
seat belts; see Owner’s Manual
for proper installation and child
seat tether and LATCH system
instructionsWARNING: Read all
information
and warnings
in Owner ’s Manual and
attached to seat before
using child-safety seat
Dual locking mode lap/
shoulder belt retractor
(Front passenger and rear
retractable safety belts only)
Emergency locking mode: Belt
locks only on hard braking/
cornering or impacts of about
5 mph or more Automatic locking mode:
Must be used when installing
child-safety seat
To activate: Pull webbing fully out
of retractor until click is heard;
belt will only tighten
To disengage: Unbuckle belt and
allow webbing to retract fullyWARNING: Make sure all
adjustable seats are properly
latched, because during a
sudden stop or collision the
seat or seatback could move,
causing injury
Third-row seat
Insert seat belts in retainers;
remove head restraints; pull strap
(
1 ), push seatback toward front of
vehicle until it locks with a click
Pull strap ( 2); lift seatback and
seat bottom up to vertical; gently
lower the seat into seat well
12