heater MAZDA MODEL RX 8 2005 Owners Manual (in English)

Black plate (171,1)
qOperating Tips for CD Player/In-
Dash CD Changer
Condensation phenomenon
Immediately after turning on the heater
when the vehicle is cold, the CD or
optical components (prism and lens) in the
CD player/changer may become clouded
with condensation. At this time, the CD
will eject immediately when placed in the
unit. A clouded CD can be corrected
simply by wiping it with a soft cloth.
Clouded optical components will clear
naturally in about an hour. Wait for
normal operation to return before
attempting to use the unit.
Handling the CD player/In-dash CD
changer
The following precautions should be
observed.
lDo not spill any liquid on the audio
system.
lDo not insert any objects, other than
CDs, into the slot.
lThe CD revolves at high speed within
the unit. Defective (cracked or badly
bent) CDs should never be used.
lDo not use non-conventional discs
such as heart-shaped, octagonal discs,
etc. The CD player/changer could be
damaged.
lA new CD may have rough edges on
its inner and outer perimeters. If a disc
with rough edges is used, proper
setting will not be possible and the CD
player/changer will not play the CD.
Remove the rough edges in advance by
using a ball-point pen or pencil as
shown below. To remove the rough
edges, rub the side of the pen or pencil
against the inner and outer perimeter of
the CD.
Interior Comfort
Audio System
6-15
RX-8_8T69-EA-04G_Edition1 Page171
Wednesday, June 9 2004 2:12 PM
Form No.8T69-EA-04G

Black plate (250,1)
NOTE
Once the engine coolant exceeds a
preset temperature, an electrical cooling
fan turns on. It will continue running
for about 10 minutes after the ignition
switch is turned to off.
Inspect the antifreeze protection and
coolant level in the coolant reservoir at
least once a year―at the beginning of the
winter season―and before traveling
where temperatures may drop below
freezing.
Inspect the condition and connections of
all cooling system and heater hoses.
Replace any that are swollen or
deteriorated.
The coolant should be at full in the
radiator and between the F and L marks
on the coolant reservoir when the engine
is cool.
If it's at or near L, add enough coolant to
the coolant reservoir to provide freezing
and corrosion protection and to bring the
level to F.
CAUTION
Radiator coolant will damage paint.
Rinse it off quickly if spilled.
Do not overfill.
If new coolant is required frequently,
consult an Authorized Mazda Dealer.
qChanging Coolant
Change coolant according to Scheduled
Maintenance (page 8-3).
CAUTION
lUse only soft (demineralized) water
in the coolant mixture. Water that
contains minerals will cut down on
the coolant's effectiveness.
lDon't add only water. Always add a
proper coolant mixture.
lThe engine has aluminum parts and
must be protected by an ethylene-
glycol-based coolant to prevent
corrosion and freezing.
lDO NOT USE alcohol or methanol
antifreeze. DO NOT MIX alcohol or
methanol with the coolant. This
could damage the cooling system.
lDon't use a solution that contains
more than 60 % antifreeze.
This would reduce effectiveness.
8-16
Maintenance and Care
Owner Maintenance
RX-8_8T69-EA-04G_Edition1 Page250
Wednesday, June 9 2004 2:13 PM
Form No.8T69-EA-04G

Black plate (276,1)
qFuse Panel Description
Fuse block (Engine compartment)
(Next to air filter)
(Near battery)
DESCRIPTIONFUSE
RATINGPROTECTED COMPONENT
1 MAIN 120A For protection of all circuits
2 HEATER 40A Heater
3 AIR PUMP 60A Air pump
4 BTN 30APower windows, Power door locks, Illuminated entry system,
Moonroof
í
5 DEFOG 50A Rear window defroster
6 FAN 40A Electric fan
7 ABS/DSC 60A ABS, DSC
í
8 ACC 30A Lighter, Power control mirror, Accessory socket, Audio system
9 HEAD 15A Headlight high beamsí, Headlight cleanerí
10 HEAD LOW R 15A Headlight low beam (RH)
11 HEAD LOW L 15A Headlight low beam (LH)
12 DRL 15A DRL
í(Headlight high beams)
13 DSC 30A DSCí
14 SEAT WARM 20A Seat warmerí
15 H/CLEAN 20A Headlight cleanerí
16 R.FOG 10A―
8-42
Maintenance and Care
íSome models.
Owner Maintenance
RX-8_8T69-EA-04G_Edition1 Page276
Wednesday, June 9 2004 2:13 PM
Form No.8T69-EA-04G

s
not in the
ep 1,
ters. ng starts
cter
s
N,
s position
ENTER
ENTER
ENTER
ENTER
23
POI Icons on Maps / Zipcode Entry
POI (Point of Interest) Icons
The following are POI icons shown on maps.
Routing
AUTO SERVICES
PARKING GARAGE
PARKING LOT
PARK & RIDE AUTO REPAIR
GAS STATION
RENTAL CAR
FACILITY
REST AREA
AUTOMOBILE
ASSOCIATION
BORDER
CROSSING
BUSINESS
FACILITY
EMERGENCY
HOSPITAL
HOTEL OR
MOTEL
LEISURE/
RECREATION
AMUSEMENT PARK
CASINO
GOLF COURSE
HISTORICAL
MONUMENT
MARINA
MUSEUM
PARKS AND
RECREATION
THEATER
SKI RESORT
STADIUM / ARENA
TOURIST
ATTRACTION
TOURIST INFORMATI0N
WINERY
PUBLIC
FACILITY
CITY HALL
COMMUNITY CENTER
COURT HOUSE
LIBRARY
SCHOOL
EXHIBITION OR
CONFERENCE CENTER
UNIVERSITY OR
COLLEGE
SHOPPING RESTAURANT
GROCERY STORE
SHOPPING CENTER
TRANS -
PORTATION
AIRPORT
BUS STATION
LIGHT RAIL
STATION
FERRY TERMINAL
TRAIN STATION
NAMED PLACE
POLICE STATION
BANKING
ATM
BANK

41
Maintenance
Care of the Product
Use a dry, soft cloth to wipe it.
Cleaning this product
Never use solvents such as benzene and thinners they may mar the surface of the unit.
Cautions for cleaning
If you require the latest map disc, consult an Authorized Mazda Dealer. For latest map disc information,
please refer to "Map Related Issues" on page 9.
Map disc
Handling and Care of Map Discs


Do not touch the underside of the disc.


Do not make scratches on the disc.


Do not bend the disc.


When not in use, keep the disc in the case.
How to hold the disc




Near car heaters Direct sunlight


In dirty, dusty and damp areas


On seats and dashboardsDo not leave discs in the following places:


Use a dry, soft cloth to wipe from the center outward.
Disc Cleaning
Label side
< > Right Wrong < >
Map Disc
This unit supports only DVD-SDAL-formatted map disc (SEAMLESS) that NAVTECH has
specifically designed for this unit. Mazda shall not be liable for any damages caused
by using other formatted discs. Make sure to specify that a disc should be exclusively
used for this product when you purchase it.Caution
As necessary
rsTePor
fa
fU
XSOWrN
UsoRrf
Rr
ErOSrTZ
rsTePor
eTsoRrsNI A
O/r