pairing phone MAZDA MX5 MIATA 2017 User Guide

5 –91 Interior Features
Bluetooth ®
Voice recognition learning on/off
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Voice training”
3. Prompt: “Enrollment is enabled/
disabled. Would you like to disable/
enable or retrain?”
4. Say: [Beep] “Disable” or “Enable”
5. When “Disable” is spoken, the voice
recognition learning is turned off.
When “Enable” is spoken, the voice
recognition learning is turned on.
6. Prompt: “Speaker Enrollment is
disabled/enabled.”
Bluetooth ®
Preparation (Type B)Device pairing
To use Bluetooth ®
audio and Hands-Free,
the device equipped with Bluetooth ®
has
to be paired to the unit using the following
procedure. A maximum of seven devices
including Bluetooth ®
audio devices and
hands-free mobile phones can be paired. NOTE 
The Bluetooth ®
system may not operate
for 1 or 2 minutes after the ignition
is switched to ACC or ON. However,
this does not indicate a problem. If the
Bluetooth ®
system does not connect
automatically after 1 or 2 minutes have
elapsed, make sure that the Bluetooth ®

setting on the device is normal and
attempt to reconnect the Bluetooth ®
-
enabled device from the vehicle side. 
If Bluetooth ®
-enabled devices are used
in the following locations or conditions,
connection via Bluetooth ®
may not be
possible. 
The device is in a location hidden
from the center display such as
behind or under a seat, or inside the
glove compartment. 
The device contacts or is covered by
a metal object or body. 
The device is set to power-saving
mode.
Pairing Procedure
1. Select the icon on the home screen
to display the Settings screen.
2. Select the tab.
3. Select .
4. Turn the Bluetooth ®
setting on.
5. Select to display the
message and switch to the device
operation.
6. Using your device, perform a search
for the Bluetooth ®
device (Peripheral
device).
7. Select “Mazda” from the device list
searched by the device.
MX-5_8FR4-EA-16J_Edition1.indb 91 2016/08/11 20:29:25

5 –92 Interior Features
Bluetooth ®
8. (Device with Bluetooth ®
version 2.0)
Input the displayed 4-digit pairing code
into the device.
(Device with Bluetooth ®
version 2.1
or higher)
Make sure the displayed 6-digit code
on the audio is also displayed on the
device, and touch the
.
Connection permission and phonebook
access permission for your mobile
device may be required depending on
the mobile device.
9. If pairing is successful, the functions of
the device connected to Bluetooth ®
are
displayed.
10. (Devices compatible with Mazda
Email / SMS function)
SMS (Short Message Service)
messages, and E-mail for the device are
downloaded automatically. A download
permission operation for your device
may be required depending on the
device.
NOTE
When Call history and messages are
downloaded automatically, each automatic
download setting must be on.
Refer to Communication Settings on page
5-112 .
After a device is registered, the system
automatically identifies the device. By
activating Bluetooth ®
Hands-Free again, or
by activating Bluetooth ®
Hands-Free first
after switching the ignition from OFF to
ACC, the device connection condition is
indicated in the center display. IMPORTANT note about pairing and
automatic reconnection: 
If pairing is redone on the same
mobile phone device, first clear
“Mazda” displayed on the Bluetooth ®

setting screen of the mobile device. 
When the OS of the device is updated,
the pairing information may be deleted.
If this happens, reprogram the pairing
information to the Bluetooth ®
unit. 
Before you pair your device, make sure
that Bluetooth ®
is “ON”, both on your
phone and on the vehicle.
Device selection
If several devices have been paired, the
Bluetooth ®
unit links the device last
paired. If you would like to link a different
paired device, it is necessary to change the
link. The order of device priority after the
link has been changed is maintained even
when the ignition is switched off.
Connecting other devices
1. Select the icon on the home screen
to display the Settings screen.
2. Select the tab.
3. Select .
4. Turn the Bluetooth ®
setting on.
5. Select the name of the device you
would like to connect.
6. selection
Connects both devices as hands-free
and Bluetooth ®
audio.
selection
Connects as a hands-free device.
selection
Connects as Bluetooth ®
audio.
MX-5_8FR4-EA-16J_Edition1.indb 92 2016/08/11 20:29:25

5 –129 Interior Features
Bluetooth ®
TroubleshootingMazda Bluetooth ®
Hands-Free Customer Service
If you have any problems with Bluetooth ®
, contact our toll-free customer service center.
U.S.A.
Phone: 800-430-0153 (Toll-free)
Web: www.mazdausa.com/mazdaconnect 
Canada
Phone: 800-430-0153 (Toll-free)
Web: www.mazdahandsfree.ca 
Mexico
Center of Attention to Client (CAC)
Phone: 01-800-01-MAZDA (Toll-free)
Web: www.mazdamexico.com.mx
Bluetooth ®
Device pairing, connection problems Symptom Cause Solution method
Unable to perform pairing — First make sure the device is
compatible with the Bluetooth ®

unit, and then check whether the
Bluetooth ®
function and the Find
Mode/Visible setting *1
on the device
are turned on. If pairing is still
not possible after this, contact an
Authorized Mazda Dealer or Mazda
Bluetooth ®
Hands-Free Customer
Service.
Pairing cannot be performed again The pairing information paired to
the Bluetooth ®
unit or device is not
recognized correctly. Perform pairing using the following
procedure. 
Clear “Mazda” stored in the device. 
Perform pairing again.
Unable to perform pairing
The Bluetooth ®
function and the
Find Mode/Visible setting *1
on the
device may turn off automatically
after a period of time has elapsed
depending on the device. Check whether the Bluetooth ®

function and the Find Mode/Visible
setting *1
on the device are turned on
and pairing or reconnect.Does not connect automatically
when starting the engine
Automatically connects, but then
disconnects suddenly
Disconnects intermittently The device is in a location in which
radio wave interference can occur
easily, such as in a bag or in a rear
pocket of a pair of pants. Move the device to a location in
which radio wave interference is less
likely to occur.
Does not connect automatically
when starting the engine The pairing information is updated
when the device OS is updated. Perform pairing again.
*1 Setting which detects the existence of a device external to the Bluetooth ®
unit
MX-5_8FR4-EA-16J_Edition1.indb 129 2016/08/11 20:29:34

5 –130 Interior Features
Bluetooth ®
NOTE 
When the OS of the device is updated, the pairing information may be deleted. If this
happens, reprogram the pairing information to the Bluetooth ®
unit.
If you pair your phone which has already been paired to your vehicle more than once in
the past, you need to delete “Mazda” on your mobile device. Then, execute the Bluetooth ®

search on your mobile device once again, and pair to a newly detected “Mazda”. 
Before you pair your device, make sure that Bluetooth ®
is “ON”, both on your phone and
on the vehicle. 
If Bluetooth ®
-enabled devices are used in the following locations or conditions,
connection via Bluetooth ®
may not be possible.
The device is in a location hidden from the center display such as behind or under a
seat, or inside the glove compartment. 
The device contacts or is covered by a metal object or body. 
The device is set to power-saving mode. 
Different Bluetooth ®
-enabled devices can be used for Bluetooth ®
Hands-Free and
Bluetooth ®
audio. For example, device A can be connected as a Bluetooth ®
Hands-
Free device and device B can be connected as a Bluetooth ®
audio device. However, the
following may occur when they are used at the same time. 
The Bluetooth ®
connection of the device is disconnected.
Noise occurs in the Hands-Free audio. 
Hands-Free operates slowly.
Voice recognition related problems Symptom Cause Solution method
Poor voice recognition 
Excessive, slow speech. 
Excessive, forceful speech
(shouting). 
Speaking before the beep sound
has ended. 
Loud noise (speaking or noise from
outside/inside vehicle). 
Airflow from A/C is blowing
against the microphone. 
Speaking in off-standard
expressions (dialect). Regarding the causes indicated
on the left, be careful with how
you speak. In addition, when
numbers are spoken in a sequence,
recognition ability will improve
if no stop is placed between the
numbers.False recognition of numbers
Poor voice recognition There is a malfunction in the
microphone. A poor connection or malfunction
with the microphone may have
occurred. Consult an Authorized
Mazda Dealer.
Phone-related voice recognition is
disabled There is a problem with the
connection between the Bluetooth ®

unit and the device. If there is any malfunction after
checking the pairing situation, check
for device pairing or connection
problems.
MX-5_8FR4-EA-16J_Edition1.indb 130 2016/08/11 20:29:34