wheel alignment MERCEDES-BENZ A-CLASS HATCHBACK 2008 Owners Manual

Loading and stowing
1521
Seat cushion
X Fold left or right seat cushion 1forwards. 2
Release handle
3 Seat cushion X
Grasp release handle 2and pull seat cush-
ion 3upwards.
X Remove seat cushion 3. 4
Hinge
X If the backrest is to be removed: fold down
hinge 4.
If the backrest is only to be folded down:
leave hinge 4as a support for the backrest
in the position shown above.
i Vehicles with TIREFIT kit:
You can stow the seat cushions under the
variable luggage compartment floor*.
Vehicles with emergency spare wheel:
You can stow a seat cushion under the var-
iable luggage compartment floor*. !
Vehicles with emergency spare wheel*,
loud speaker system* or sound system*:
You cannot stow any seat cushions under
the variable luggage compartment floor*.
Fitting rear seat cushions* X
Fold hinge 4upwards if necessary. Only
then can the seat cushion be slid in.
X Slide the seat cushion onto the fixtures
until it engages.
i For easier alignment of the cushions,
observe the arrows on the rear of the seat
cushions.
X Swing the seat cushion back.
Removing the backrests* X
Fold the seat cushion forwards
(Y page 151). Controls
169_AKB; 2; 4, en-GB
wdomann
, Version: 2.10.6
2008-07-16T08:52:06+02:00 - Seite 152 Dateiname: 6515_0315_02_buchblock.pdf; preflight