charging MERCEDES-BENZ A-CLASS HATCHBACK 2021 Owner's Guide

#
T
To r
o r educe t
educe t he tyr
he tyre pr
e pressur
essur e:
e:press pressure
re lease button 1next tomanome ter2. #
When the tyre pressure is cor rect, unscr ew
th e /lling hose from theva lve of the sealed
tyre. #
Screw theva lve cap onto theva lve of the
sealed tyre. #
Pull the tyre sealant bottle out of the tyre in0a-
tion compressor.
The /lling hose st ays on the tyre sealant bot-
tle. #
Drive tothe nearest quali/ed specialist work-
shop and ha vethe tyre, tyre sealant bottle and
/lling hose replaced there. Batt
Batt
er
ery (v
y (v ehicle)
ehicle) N
No
ot
tes on t
es on t he 12 V batt
he 12 V batt ery
ery &
W
WARNING
ARNING Risk ofexplosion due toelec-
trostatic charge
Electrostatic charge can ignite the highly
ex plosive gas mixtu reinthe batter y. #
Todischar geany elect rostatic charge
th at may ha vebuilt up, touch the me tal
ve hicle body before handling the batter y. The high
ly0ammable gas mixtu reis created while
th e battery is charging and during starting assis-
ta nce. &
W
WARNI NG
ARNI NGDanger of chemical burns from
th e battery acid
Battery acid is caustic. #
Avoid contact with the skin, eyes or
clo thing. #
Do not lean overth e batter y. #
Do not inhale battery gases. #
Keep children away from the batter y. #
Immediately rinse bat tery acid o. thor-
oughly with plenty of clean water and
seek medical attention immediatel y. +
ENVIR
ENVIR
ONMENT
ONMENT AL NO
AL NOTE
TEEnvironmen tal
damage due toimproper disposal of bat-
te ries Batteries contain pollutants. It is
illegal todispose of them with the household
ru bbish. #
Dispose of batteries in an
environmentally responsible manner.
Ta ke dischar ged batteries toaqu ali/ed
specialist workshop or toa collection
point for used batteries. If
yo u ha vetodisconnect the 12 V batter y,con-
ta ct a quali/ed specialist workshop.
Comply with saf ety no tes and take protective
measures when handling batteries. 354
354
Breakdown assistance

Risk of
explosion. Fire
, naked 0ames and smoking are
prohibi ted when handling the batter y.
Av oid creating spar ks. Electrolyte or battery acid is cor
rosive.
Av oid contact with the skin, eyes or
clo thing. Wear suitable pr otective
clo thing, in particular glo ves, an apron
and a face mask. Immediately rinse
electrolyte or acid splashes o. with
clean water. Consult a doctor if neces-
sar y. We
ar saf ety glasses. Ke
ep children away. Obser
vethis Owner's Manual.
If yo u do not intend touse theve hicle over an
ex tended period of time:
R activate standby mode, or
R connect the battery toa battery charger
appr ovedby Mercedes-Benz, or
R consult a quali/ed specialist workshop todis-
connect the battery N No
ot
tes on st
es on st ar
arting assist
ting assist ance and c
ance and c har
harging t
ging t he 12
he 12
V batt
V batt ery
ery When
charging the battery and during starting
assistance, alw ays use the jump-start connection
point in the engine compartment.
* N
NOOTE
TE Damage tothe battery from over-
vo ltage When
charging using a battery charge r without
a re striction of the maximum charging voltage, th
e battery or the on-board electronics can be
damaged. #
Only use battery charge rs with a maxi-
mum charging voltage of 14.8 V. &
W
WARNI NG
ARNI NGRisk of explosion due tohydro-
ge nga s igniting
If, when charging a batter y,there is a short
circuit or spar ksstart toform ,th ere is a dan-
ge r of hydrogen gas igniting. #
Take care that the positive clamp con-
nected toa battery does not come into
contact with vehicle parts. #
Never place me tal objects or tools on a
batter y. #
When connecting and disconnecting the
batter y,alw ays obser vethe sequence of
battery clamps described. #
Take care toonly connect battery term i-
nals of identical polarity when receiving
starting assistance. Breakdown assistance
355
355

#
Obser vethe sequence described for
connecting and disconnecting the jump
leads when receiving starting assistance. #
Do not connect or disconnect the bat-
te ry term inals while the engine is run-
ning. &
W
WARNI NG
ARNI NGRisk of explosion due toexplo-
sive mixture of gases
An explosive mixture of gases can escape
from the battery during charging and starting
assis tance. #
Fire , naked 0ames, smoking and creating
spar ksmust be avoided. #
Make sure there is adequate ventilation. #
Do not stand overth e batter y. &
W
WARNI NG
ARNI NGRisk of explosion from a frozen
battery
A dischar ged battery may freeze at temp era-
tures slightly abo veor below freezing point. During starting assistance or battery
charging,
battery gas can be released. #
Always allow a battery tothaw before
ch arging it or per form ing starting assis-
ta nce. If
th e indicator/warning lamps in the instrument
cluster do not light up at low temp eratures, it is
ve ry likely that the dischar ged battery has frozen.
In this case you may neither jump-start theve hi-
cle nor charge the batter y.
The service life of a bat tery that has been thawed
may be dramatically shor tened. The starting char-
acteristics may be impaired, especially at low
te mp eratures.
It is recommended that you ha veath awe d battery
ch ecked at a quali/ed specialist workshop.
* N
NO OTE
TE Damage caused bynume rous or
ex tended attem ptsto start the engine Numerous or
extended attem ptsto start the
engine may damage the catalytic con verter
due tonon-combusted fuel. #
Avoid numerous and extended attem pts
to start the engine. Obser
vethefo llowing points during starting assis-
ta nce and when charging the batter y:
R Only use undamaged jump lead/charging
cables with a su1cient cross-section and
insulated term inal clamps.
R Non-insulated parts of thete rm inal clamps
must not come into contact with other me tal
parts while the jump lead/charging cable is
connected tothe battery/jump-start connec-
tion point.
R The jump lead/charging cable must not come
into contact with any parts which may mo ve
when the engine is running.
R Always make sure that nei ther you nor the bat-
te ry is electros tatically charge d.
R Keep awa y from /re and naked 0ames.
R Do not lean overth e batter y. 356 356
Breakdown assistance

Obser
vethe additional following points when
ch arging the batter y:
R Only use battery charge rs tested and
appro vedfo r Mercedes-Benz.
R Read the battery charge r's operating inst ruc-
tions before charging the batter y.
Obser vethe additional following points during
starting assistance:
R For starting assistance, only use batteries with
a nominal voltage of 12 V.
R The vehicles must not touch.
R P
P e
e tr
tr ol engine:
ol engine: only accept starting assistance
if th e engine and exhaust system are cold. S
S
t
tar
ar ting assist
ting assist ance and c
ance and c har
harging t
ging t he 12 V batt
he 12 V batt ery
ery R
R
eq
eq uir
uir ements:
ements:
Plug-in h
Plug-in h ybr
ybrid:
id:in order tostart, theve hicle
re qu ires a su1cient charge leve l of the high-volt-
age battery as well as a su1cient po wer output of
th e 12 V on-board electrical system.
R The vehicle is secured with the electric par k-
ing brake. R
A Aut ut omatic tr
omatic tr ansmission:
ansmission: the transmission is in
position j.
R Manual tr
Manual tr ansmission:
ansmission: the transmission is in
neutral.
R The vehicle and all elect rical consume rsare
switched o..
R The bonnet is open. #
Slide co ver1 of positive clamp 2onthe
jump-starting connection point in the direction
of the ar row. #
Connect positive clamp 2onyour vehicle to
th e positive pole of the donor battery using
th e jump lead/charging cable. Alw ays begin
with positive clamp 2onyour ow nve hicle
/rst. #
Dur
During st
ing st ar
arting assist
ting assist ance:
ance:startthe engine of
th e donor vehicle and run at idle speed. #
Connect the negative pole of the donor bat-
te ry and ear thpoint 3ofyour ow nve hicle by
using the jump lead/charging cable. Begin
with the donor battery /rst. #
Dur
During st
ing st ar
arting assist
ting assist ance:
ance:startthe engine of
yo ur ow nve hicle. #
Dur During t
ing t he c
he char
harging pr
ging pr ocess:
ocess: startthech arg-
ing process. #
Dur During st
ing st ar
arting assist
ting assist ance:
ance:letthe engines run
fo r se veral minutes. #
Dur During st ing st ar
arting assist
ting assist ance:
ance:before disconnect-
ing the jump lead, switch on an electrical con- Breakdown assistance
357
357

sumer on
your ow nve hicle, e.g. there ar win-
dow heater or lighting.
When the starting assistance/charging process is
comple te: #
Firs t, re mo vethe jump lead/charging cable
from ear thpoint 3and the negative pole of
th e donor batter y,then from positive clamp
2 and the positive pole of the donor batter y.
Begin ea chtime with the contacts on your
ow nve hicle /rst. #
ATer removing the jump lead/charging cable,
close co ver1 of positive clamp 2.
Plug-in h
Plug-in h ybr
ybrid:
id:ifyo ur vehicle has been star ted
with starting assis tance, it may not be possible to
use the electric drive for appr oximately 30
minutes.
Fu rther information can be obtained at a quali/ed
specialist workshop. R R
eplacing t
eplacing t he 12 V batt
he 12 V batt ery
ery #
Obser vethe no tes on the 12 V battery
(/ page 354). Mercedes-Benz
recommends that you ha vethe
12 V battery replaced at a quali/ed specialist
wo rkshop, e.g. at a Mercedes-Benz Se rvice
Centre.
Obser vethefo llowing no tes if youwa nttoreplace
th e battery yourself:
R Alwaysre place a faulty battery with a battery
which meets the speci/c vehicle requ ire-
ments.
The vehicle is equipped with a 0eece batter y.
Fu llve hicle functionality is only guaranteed
with a 0eece batter y.Fo r saf etyre asons,
Mercedes-Benz recommends that you only
use batteries which ha vebeen tested and
appro vedfo ryo ur vehicle byMercedes-Benz.
R Use de tach able parts such as vent hoses,
elbow /ttings or term inal co vers from the bat-
te ry which is tobe replaced.
R Make sure that theve nt hose is alw ays con-
nected tothe original opening on the side of
th e batter y.
Fi t any existing or supplied cell caps.
Otherwise, gases or battery acid could
escape. R
Make sure that de tach able parts are recon-
nected in the same way. T T
o
o w
w -st
-st ar
arting or to
ting or towing away
wing away P
P
er
er mitt
mitt edto
ed towing met
wing met hods (non plug-in h
hods (non plug-in h ybr
ybrid)
id) Mercedes-Benz
recommends transporting your
ve hicle in the case of a breakdown, rather than
to wing it away.
Fo rto wing, use a tow rope or tow bar with bo th
axles on thegr ound. Do not use tow bar systems. &
W
WARNING
ARNING Risk of accident when towing
with steering wheel lock
If th e steering wheel lock is engaged, you will
not be able tosteer theve hicle. #
When towing with a tow rope or tow bar,
alw ays switch on theve hicle. *
N NOOTE TE Damage totheve hicle due to tow-
ing awa y incor rectly #
Obser vethe inst ructions and no tes on
to wing away. 358 358
Breakdown assistance

V
V
ehicle dimensions (plug-in h
ehicle dimensions (plug-in h ybr
ybrid)
id) A 250 e
A 250 e
Ve
hicle lengt h4 419 mm
Ve hicle width including outside
mir rors 1992 mm
Ve hicle width excluding out-
side mir rors 1796 mm
Ve hicle height 1452 mm
Wheelbase 2729 mmW W
eights and loads
eights and loads Please obser
vethefo llowing no tesfo rth e speci-
/ed vehicle data:
R Items of optional equipment increase the unla-
den weight and reduce the pa yload.
R Vehicle-speci/c weight information can be
fo und on theve hicle identi/cation plate
(/ page 392). R
R oof load
oof load Model
Model
Maximum r
Maximum roof load
oof load
All model s7 5 kg High-v
High-v
olt
oltag
age batt
e batt er
ery (plug-in h
y (plug-in h ybr
ybrid)
id) N
No
ot
tes on t
es on t he pow
he pow er suppl
er suppl y f
y f or v
or v ehicles wit
ehicles wit h a
h a
high-v
high-v olt
oltag
age batt
e batt ery
ery
In accordance with European standard
EN 17186:2019 vehicle identi/ers are located on
th eve hicle in thefo llowing places:
R Onthe inside of the soc ket 0ap
R Onthech arging cable connector
In addition, charging stations in European coun-
tries are equipped with ene rgy supp lyidenti/ers.
Yo u can rech arge your vehicle at charging stations
where thech arging station identi/er cor responds
to theve hicle identi/er.
Fo r fur ther information on charging the high-volt-
age batter y,referto the "Charging the high-volt-
age battery" section (/ page 194). 1
Supply type: AC
St andard: EN 62196-2
St yle: type 2
Plug type: charging cable soc ket and vehicle
plug
Vo ltage range: 480 V RMS
2 Supply type: DC
Standard: EN 62196-3
St yle: FF
Plug type: charging cable soc ket and vehicle
plug
Vo ltage range: 50 V to500 V
3 Supply type: DC 404 404
Te
ch nical data

St
andard: EN 62196-3
St yle: FF
Plug type: charging cable soc ket and vehicle
plug
Vo ltage range: 200 V to920 V
Missing values werenot available at the time of
going topress.
Maximum batt Maximum batt er
ery capacity and c
y capacity and c har
harging times
ging times A 250 e
A 250 e
Ty
pe Lithium-ion
Maximum energy content 15.6 kWh
Ra nge in electric-only mode
Cha rge time – mode 4
Direct cur rent at fast charging
station with 22 kW charging
capacity App
rox. 25
min
Char getime – mode 3
with 7.4 kW charging capacity App
rox. 1 h
45 min A 250 e A 250 e
Char
getime – mode 2
with 3.7 kW charging capacity App
rox. 3 h
15 min
Char getime – mode 2
with 2.3 kW charging capacity App
rox. 5 h
30 min
Char getime – mode 2
with 1.8 kW charging capacity App
rox. 7 h
30 min Char
getimes – modes 2 and 3 app lyto alternat-
ing cur rent charging from 10% to100% of the usa-
ble energy content. Char getime – mode 4 applies
to direct cur rent charging from 10% to80% of the
usable energy content.
The time take nto charge the battery depends on
th ech arge status of the batter y,the ambient tem-
perature and thech arging capacity of the batter y.
The charging capacit y,in turn, depends on the
supply voltage, the cur rent intensity and the type
of po wer suppl y.
The nominal voltage range foryo ur vehicle can be
fo und on the information label in the soc ket co ver
( / page 194). T T
r
railer hitch
ailer hitch Gener
Gener
al not
al notes on t
es on t he tr
he trailer hitch
ailer hitch Modi/cations
tothe engine cooling system may
be necessar y,depending on theve hicle model.
The retro/tting of a trailer hitch is on lypermissi-
ble if a towing capacity is speci/ed in your vehicle
documents.
Fu rther information can be obtained at a quali/ed
specialist workshop. Te
ch nical data
405 405

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
&
inoperative Refuel vehicle *T
here is too little fuel in the fuel tank. The stationary hea ter cannot be switched on. #
Refuel theve hicle.
&
inoperative High-voltage
battery charging incom-
plete *T
he high- voltage battery is charging. Pre-ent ryclimate cont rol cannot be switched on. #
Wait until thech arging process has achie ved a minimum charge.
&
inoperative Charge HV bat-
tery *T
hecharge ofthe high-voltage battery is too lo w.Pre-entry clima tecont rol cannot be switched on. #
Char gethe high-voltage batter y. Display messages and
warning/indicator lamps
421 421

Hybr
Hybr
id syst
id syst em
em Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
u
Towing not permitted See
Owner's Manual *T
he drive system is malfunctioning. #
Have theve hicle transpo rted only using a transpor ter or trailer (/ page 359).
ò Acoustic presence indica-
tor inoperative *T
he sound generator (acoustic vehicle warning system) is malfunctioning. No driving noises are being produced. The
ve hicle may not be heard by otherroad users. #
Drive with particular care. #
Consult a quali/ed specialist workshop.
è
Charger cable connected *Y
ou cannot pull away while thech arging cable is connected. #
Disconnect thech arging cable from theve hicle.
Not possible to unlock
charging cable See Own-
er's Manual *T
hecharging cable connector cann otbe remo ved from thech arging station's soc ket. #
Press the EMERGENCY OFF switch on thech arging station.
If th ech arging cable connector cann otbe remo ved aTer that: Displ
aymessages and warning/indicator lamps
423
423

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Request service personnel from the operator of thech arging station via the emer gency call button attached tothe
ch arging station or the emer gency call numbers.
Vehicle not currently being
charged Charging station
fault *A
malfunction has occur red in thech arging station or the RFID card is not recognised. #
Start thech arging process at a di.erent charging station.
or #
Have the RFID card checkedto ensure it is functioning.
Charging method currently
unavailable Please try
again or change charging
method *A
temp orary malfunction has occur red in thech arging station. #
Wait until the malfunction has passed.
or #
Start thech arging process at a di.erent charging station.
Charging fault Please
change charging method
See Owner's Manual *A
temp orary malfunction has occur red in thech arging station. #
Wait until the malfunction has passed.
or #
Start thech arging process at a di.erent charging station.
Only electric drive availa-
ble Power limited *T
he fuel tank is em pty and the combustion engine is switched o.. The output of your vehicle is limi ted because you
are driving in elect ric mode. 424 424
Display messages and
warning/indicator lamps