engine MERCEDES-BENZ A-CLASS HATCHBACK 2021 Manual Online

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
6
Please wait Depressurising
tank *V
Vehicles wit ehicles wit h pe
h petr
trol engines:
ol engines: the pressure in the fuel tank is reduced before the fuel /ller 0ap is opened. The pressure
re duction can take up to15 minutes.
6 Tank is depressurised
Ready for refuelling *V
Vehicles wit ehicles wit h pe
h petr
trol engines:
ol engines: the pressure in the fuel tank is released and the fuel /ller 0ap opens.
6
Tank ventilation Malfunc-
tion Consult workshop *V
Vehicles wit
ehicles wit h pe
h petr
trol engines:
ol engines: There is a malfunction in the fuel system. #
Consult a quali/ed specialist workshop. 428
428
Displ
aymessages and warning/indicator lamps

V
V
ehicle
ehicle Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
d
Vehicle is operational
Switch off ignition before
exiting *Y
ou are leaving theve hicle in a ready-to-drive state. #
Get out of theve hicle, secure it against rolling away and take theke y with you. #
Ifyo u do not lea vetheve hicle, switch o. the electrical consumers, e.g. the seat heating. Otherwise, the 12‑V bat-
te ry may dischar geand starting the engine may be possible only with the help of a second battery (jump start).
ï
Check trailer hitch
lock (white display message) *T
he trailer hitch is not operational during a jou rney with a trailer. &
W WARNING
ARNING Risk of an accident if the ball neck is not loc ked
The trailer may become de tach ed. #
Stop theve hicle immediately in accordance with the tra1c conditions. Do not continue driving. #
Uncouple the trailer and secure it against rolling away. #
Initiate a new swivelling procedu reand do not re-couple the trailer until the display message disappears. #
Initiate a new swivel mo vement (/ page 271). #
When the display message disappears, couple up the trailer and drive on.
If th e display message does not disappear, the trailer hitch is malfunctioning and the ball neck is not loc ked. Display messages and
warning/indicator lamps
429
429

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Ù
Steering malfunction See
Owner's Manual *T
he elect ric steering lock is malfunctioning. The steering may be loc kedby the electric steering loc k. &
W WARNI NG
ARNI NGRisk of accident if steering capability is impai red
If th e steering does not function as intended, theve hicle's operating saf ety is jeopardised. #
Pull over and stop theve hicle safely as soon as possible, paying attention toroad and tra1c conditions. Do
not continue driving under any circums tances. #
Consult a quali/ed specialis two rkshop. #
Stop theve hicle immediately in accordance with the tra1c conditions. Do not continue driving. #
Consult a quali/ed specialist workshop.
û
Before starting the engine,
turn the steering wheel. *T
he elect ric steering lock could not unlock the steering. #
Switch o. theve hicle. #
Tounlock the steering, mo vethe steering wheel slightly tothe leT and right. #
Switch on theve hicle again.
Active bonnet malfunction
See Owner's Manual *T
he active bonn et(pedest rian pr otection) is malfunctioning or inoperative aTer having already been triggered. #
Consult a quali/ed specialist workshop. 432 432
Displ
aymessages and warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
C *A
t least one door is open. #
Close all doors.
? *T
he bonn etis open. &
W
WARNING
ARNING Risk of accident due todriving with the bonnet unloc ked
The bonnet may open and blo ckyour vie w. #
Neverre lease the bonnet when driving. #
Before every trip, ensure that the engine bonnet is loc ked. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Close the bonnet.
A *T
hetailgate is open. &
D
DAN
AN GER
GER Risk of poisoning from exhaust gases
Combustion engines emit poisonous exhaust gases, such as carbon monoxide. Exhaust gases can enter theve hi-
cle interior if theta ilgate is open when theve hicle is running, especially if theve hicle is in motion. #
Always switch o. theve hicle before opening theta ilgate. #
Never drive with theta ilgate open. Display message
s andwarning/indicator lamps
433
433

Engine
Engine
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
To switch off the engine,
press the Start/Stop but-
ton for at least 3 seconds
or 3 times. *Y
ou ha vepressed the start/s top button while theve hicle is in motion. #
Information about switching o. theve hicle while driving (/ page 166).
Cannot start engine See
Owner's Manual *T
hevehicle cann otbe star ted. #
Switch theve hicle o. and switch it back on #
Ifth e display message still appears, consult a quali/ed specialist workshop.
+
Top up coolant See Own-
er’s Manual *T
he coolant le vel is too lo w.
* N NO
OTE
TE Engine damage due toinsu1cient coolant #
Avoid long journe yswith insu1cient coolant. #
Add coolant (/ page 336). #
Have the engine cooling system checked at a quali/ed specialist workshop. Displ
aymessages and warning/indicator lamps
435
435

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
ÿ
Coolant Stop vehicle
Switch engine off *T
he coolant is too hot. #
Stop immediately in accordance with the tra1c conditions and switch o. theve hicle. &
W WARNING
ARNING Risk of burns when opening the bonnet
If yo u open the bonnet in theev ent of an overheated engine or /re in the engine compartment, thefo llowing situa-
tions may occur:
R You may come into contact with hot gases.
R You may come into contact with other escaping hot operating 0uids. #
Before opening the bonnet, allow the engine tocool down. #
Intheev ent of a /re in the engine compartment, keep the bonnet closed and call the /re service. #
Wait until the engine has cooled down. #
Make sure that the air supply tothera diator is not obstructed. #
Avoiding high loads on the engine, drive tothe nearest quali/ed specialist workshop. In doing so, ensu rethat the
coolant temp erature display remains below 120°C.
ÿ *T
here is a malfunction in the engine cooling system. #
Avoiding high loads on the engine, drive tothe nearest quali/ed specialist workshop. In doing so, ensu rethat the
coolant temp erature display remains below 120°C. 436
436
Display messages and
warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
æ
Reserve fuel level *T
he fuel supply has dropped into there ser verange. #
Refuel.
! Clean the fuel filter *V
Vehicles wit
ehicles wit h diesel engines:
h diesel engines: the fuel /lter is dirty or thewa ter in the fuel /lter needs tobe drained. #
Consult a quali/ed specialist workshop.
¸
Replace air cleaner *V
Vehicles wit
ehicles wit h diesel engines:
h diesel engines: the engine air /lter is dirty and must be replaced. #
Consult a quali/ed specialist workshop.
Drive system Malfunction
Visit workshop *T
he drive system is malfunctioning. #
Consult a quali/ed specialist workshop.
Drive system Malfunction
Stop Switch engine off *T
he drive system is malfunctioning. #
Stop theve hicle immediately in accordance with the tra1c conditions and switch o. the engine. #
Consult a quali/ed specialist workshop. Displ
aymessages and warning/indicator lamps
437 437

T
T
r
ransmission
ansmission Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
Only select Park (P) when
vehicle is stationary *I
t is possible toselect the park position jonly if theve hicle is stationar y. #
Depress the brake pedal tostop. #
ShiT the transmission topark position jwhen theve hicle is stationar y.
Apply brake to deselect
Park (P) position *Y
ou ha veattem pted toshiT the transmission out of park position jand into ano ther transmission position. #
Depress the brake pedal. #
Select transmission position h,kor neutral i.
To shift out of P or N,
depress brake and start
engine *Y
ou ha veattem pted toshiT the transmission out of park position jor neutral iand into ano ther transmission posi-
tion. #
Depress the brake pedal. #
Start theve hicle. #
Change the transmission position.
Apply brake to select D or R *You ha veattem pted toselect transmission position hork. #
Depress the brake pedal. #
Select transmission position hork.
Apply brake to select R *You ha veattem pted toselect transmission position k. #
Depress the brake pedal. 438 438
Display messages and
warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Depress the brake pedal. #
Engage park position j. #
Consult a quali/ed specialist workshop.
Transmission Malfunction *The transmission is malfunctioning. The cause could be an overheated clutch or bloc kedge ars. #
Let the transmission cool down. #
Ifth e display message still appears following a restart, consult a quali/ed specialist workshop.
d Trans. oil overheated Drive
on with care *T
he transmission is overheating. When the display message is active, start-up and driving characteristics may be tem-
porarily impaired. #
Drive at low engine speed. #
Avoid sporty driving. #
Before pulling away on uphill gradients, let the transmission cool down until the display message disappears.
Parking lock inoperative
Apply the parking brake *T
he transmission is malfunctioning. The park position jcann otbe selected. #
Park theve hicle safel y. #
Use the electric parking brake tosecure theve hicle against rollingaway.
Teaching in transmission
Operate selector lever
Brake for XX seconds Risk
of vehicle rolling *T
he transmission is being taught in. There is a risk of theve hicle rolling away. #
Depress and hold the brake pedal until thete ach-in process has been comple ted.
The electric parking brake is applied automatically during thete ach-in process. #
Switch on theve hicle. 440 440
Displ
aymessages and warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Select park position j, transmission position kor neutral i.
Risk of vehicle rolling away
Apply parking brake See
Owner's Manual *T
he transmission position cann otbe reliably identi/ed. #
Use the electric parking brake tosecure theve hicle against rollingaway.
Teaching in transmission
complete *T
he transmission's teach-in process is comple te. All transmission positions can be selected again.
Transmission Malfunction
Visit workshop *T
he transmission is malfunctioning.
Consult a quali/ed specialist workshop.
Depress clutch fully to
start engine *Y
ou ha veattem pted tostart theve hicle without depressing the clutch pedal. #
Depress the clutch pedal and then start theve hicle.
*T hevehicle has stalled while theve hicle was pulling away,e.g. because the clutch pedal wasre leased tooqu ickl y. #
Depress the clutch pedal again.
The vehicle will start automaticall y. #
Slowly re leasethe clutch pedal topull away.
Clutch overheated Avoid
pulling away until the warn-
ing goes out *T
he clut chis under considerable load and is overheating.
Av oid frequent pulling away and driving at walking pace over longer distances. #
Stop theve hicle, paying attention toroad and tra1c conditions and lea vetheve hicle running.
The clutch will cool more quickly when theve hicle is running. Display messa
ges and warning/indicator lamps
441 441