check engine MERCEDES-BENZ AMG GT COUPE 2022 Owners Manual

*
N
NO
OTE
TE Damage totheve hicle due todriv-
ing toofast and due toimpacts tothe
ve hicle underbody or suspension compo-
nents In
thefo llowing situations, in particular, there
is a risk of damage totheve hicle:
R theve hicle becomes grounded, e.g. on a
high kerb or an unpa vedro ad
R theve hicle is driven toofast ove r an obsta-
cle, e.g. a kerb, speed bump or po thole
R a heavy object st rike sth e underbody or
suspension components
In situations such as these, damage tothe
body, underbody, suspension components,
wheels or tyres may not be visible. Compo-
nents damaged in this wa y can un expectedly
fa il or, in the case of an accident, may no lon-
ge r absorb there sulting forc e as intended.
If th e underbody panelling is damaged, 0am-
mable materials such as lea ves, grass or twigs
can collect between the underbody and the
underbody panelling. These materials may ignite if
they come into contact with hot parts
of theex haust system. #
Have theve hicle checked and repaired
immediately at a quali/ed specialist
wo rkshop.
or #
If driving saf ety is impaired while con-
tinuing your journe y,pull over and stop
th eve hicle immediatel y,while paying
attention toroad and tra1c conditions,
and contact a quali/ed specialist work-
shop. Plug-in h Plug-in h
ybr
ybr id
id
Hybrid vehicles ha vea combustion engine and at
least one elect ric mo tor.The energy supply for
operating theve hicle elect rically is pr ovided by
th e high-voltage on-board electrical system. &
D
DAN
AN GER
GER Risk of death and /re due to
modi/ed and/or damaged components of
th e high-voltage on-board electrical sys-
tem
The vehicle's high- voltage on-board electrical
system is under high voltage. If you modify
component parts in theve hicle's high- voltage
on-board electrical system or touch damaged
component parts, you may be electrocuted. In
addition, modi/ed and/or damaged compo-
nents may cause a /re.
In theeve nt of an accident or impact tothe
ve hicle underbod y,components of the high-
vo ltage electrical system may be damaged
although the damage is not visible. #
Never make any modi/cations tothe
high- voltage on-board electrical system. #
Do not switch on or use theve hicle if its
high- voltage on-board electrical system
components ha vebeen modi/ed or dam-
aged. 28 28
General no
tes

#
Neverto uch damaged components of
th e high-voltage on-board electrical sys-
te m. #
ATer an accident, do not touch any com-
ponents of the high-voltage on-board
electrical system. #
ATer an accident, ha vetheve hicle trans-
por tedawa y. #
Have the components of the high-voltage
on-board electrical system checked at a
qu ali/ed specialist workshop and
re placed if necessar y. The components of
theve hicle's high- voltage on-
board electrical system are mar ked with yellow
wa rning stic kers. The cables of the high-voltage
on-board electrical system are orange. High-voltage components
that can become very
hot are mar ked with an additional warning stic ker: Ve
hicles with hybrid systems generate signi/-
cant lyless noise when stationary and when being
driven than vehicles with combustion engines.
When driving in elect ric mode, theve hicle may
not be heard by otherroad users due tothe signif-
icantly reduced noise generated.
It is forth is reason that theve hicle is equipped
with a sound generator, which ser ves as an acous-
tic vehicle alerting system (A VAS).
V
V ehicles wit
ehicles wit h a 48 V on-boar
h a 48 V on-boar d electr
d electrical syst
ical syst em
em &
D
DAN
ANGER GER Risk of fatal injury bytouching
damaged high-voltage components
Ve hicles with a 48 V on-board elect rical sys-
te m contain individual high-voltage compo-
nents. These high-voltage components are
under high voltage.
If yo u modify component parts of these high-
vo ltage components or touch damaged com-
ponent parts, you may be electrocuted.
High voltage components may be damaged in
an accident, although the damage may not be
visible. General no
tes
29
29

enclosed space without su1cient
venti-
lation. &
W
W ARNI NG
ARNI NGRisk of /re due to0ammable
material in the engine compartment or the
ex haust system
Flammable materials may ignite. #
Therefore, check regula rly th at there are
no 0ammable materials in the engine
compartment or on theex haust system. R
R
eq
eq uir
uir ements:
ements:
R theke y is in theve hicle and is recognised. #
ShiT the transmission toposition jori. #
Depress the brake pedal and press button 1
once. #
Ifth eve hicle does not start: switch o. non-
essential consumers and press but ton1
once. #
Ifth eve hicle still does not start and thePlace
the key in the marked space See Owner's
Manual display message appears on the
inst rument displa y: starttheve hicle with the ke
y in the mar ked space (emer gency ope ra-
tion mode) (/ page 169).
% You can switch o. theve hicle while driving. To
do this, press button 1for about thre e sec-
onds or press button 1thre e times within
th re e seconds. Be sure toobser vethe saf ety
no tes conce rning this under "Driving tips"
(/ page 172).
Obser veany information rega rding display mes-
sages that may be displ ayed on the inst rument
displa y.
F
F unction of Emo
unction of Emo tionSt
tion Start art #
Start theve hicle with the start/s top button
(/ page 168) and simultaneously pull one of
th e steering wheel gearshiT paddles 1or
2.
R The idle speed is increased brie0y when
starting the engine.
R The characteristic sound of theex haust
system is sporty (po werful) (/ page 181).
R Plug-in h
Plug-in h ybr ybrid:
id:Ifth eB orI drive
prog ram is selected, theve hicle changes
automatically totheC drive prog ram.
St
St ar
arting t
ting t he v
he vehicle wit
ehicle wit h t
h the ke
he key in t
y in t hestow
he st owage
age
com
com par
partment (emerg
tment (emerg ency oper
ency operation mode)
ation mode)
If th eve hicle does not start and thePlace the
key in the marked space See Owner's Manual
message appears in the inst rument displa y,you
can start theve hicle in emer gency ope ration
mode. Driving and parking
169 169

#
Make sure that mar ked space 2is em pty. #
Remo vekey1 from theke yring. #
Place key1 in mar ked space 2.
The vehicle will start aTer a short time.
If yo ure mo vekey1 from mar ked space 2,
th eve hicle can still be driven. For fur ther
engine starts ho wever,key1 must be loca-
te d in mar ked space 2during the entire jour-
ne y. #
Have key1 checked at a quali/ed specialist
wo rkshop. If t
If t he v
he v ehicle does no
ehicle does no t st
t start:
art: #
Place key1 in mar ked space 2and lea veit
th ere. #
Depress the brake pedal and start theve hicle
using the start/s top button.
% You can switch on the po wer supply or the
ve hicle with the start/s top button.
Obser veany information rega rding display mes-
sages that can be displ ayed on the inst rument
displa y. S
S
t
tar
ar ting t
ting t he v
he vehicle via R
ehicle via R emot
emote Online Ser
e Online Ser vices
vices Cooling or heating t
Cooling or heating t
he v
he v ehicle int
ehicle int er
erior bef
ior bef ore
ore
st
st ar
ar ting t
ting t he jour
he jour ney
ney
Ensu rethefo llowing before starting the engine:
R The legal stipulations in the area where your
ve hicle is par ked allow engine starting via
smartphone.
R It is safe tostart and runth e engine where
yo ur vehicle is par ked.
R The fuel tank is su1cient lyfull.
R The star ter battery is su1ciently charge d. Char
Char ging t
ging t he st
he start
arter batt
er batt er
ery bef
y bef or
ore st
e st ar
arting t
ting t he
he
jour
jour ney
ney
Yo u can receive a message on your smartphone
when the state of charge ofthe star ter battery is
lo w. You can then start theve hicle with the smart-
phone tocharge the batter y.The vehicle is auto-
matically switched o. aTer ten minutes.
Ensure thefo llowing before starting the engine:
R The legal stipulations in the area where your
ve hicle is par ked allow engine starting via
smartphone.
R It is safe tostart and runth e engine where
yo ur vehicle is par ked.
R The fuel tank is su1cient lyfull.
St
St ar
arting t
ting t he v
he vehicle (R
ehicle (R emot
emote Online)
e Online) &
W WARNING ARNING Risk of crushing or ent rapment
due tounintentional starting of the engine
Limbs could be crushed or trapped if the
engine is star ted unintentionally during service
or maintenance work. 170
170
Driving and parking

Inf
Inf
or
ormation on t
mation on t he AMG cer
he AMG cer amic high-pe rf
amic high-perf or
orm-
m-
ance com
ance com posit
posite br
e brak
ake syst
e syst em
em The brake system is designed
for heavy loads.
This may lead tonoise when braking. This e.ect
can also occur aTer washing theve hicle.
The noise depends on thefo llowing factors:
R speed
R brake force
R environmental conditions, e.g. temp erature
and air humidity
% Have the brake system checked at a quali/ed
specialist workshop aTer it has been subjec-
te dto extreme loads. EC
EC
O st
O st ar
art/st
t/st op function
op function EC
EC
O st
O st ar
art/st
t/st op function
op function
% Depending on the engine, the ECO start/s top
function is not available in all drive prog rams.
Obser vethe status display in the inst rument
display forth is.
% Plug-in h
Plug-in h ybr
ybrid:
id:This function is not available. The engine is switched o. automatically in
thefo l-
lowing situations if all vehicle conditions for an
automatic engine stop are met:
R You brake theve hicle toa standstill in trans-
mission position hori.
R V
Vehicles wit
ehicles with a 48 V on-boar h a 48 V on-boar d electr
d electrical sy
ical sys-
s-
t
t em:
em: You depress the brake pedal when tr avel-
ling at a low speed.
If th e system has de tected one of thefo llowing
situations, the engine will not stop:
R You stop at a stop sign and there is no vehicle
in front of you.
R The vehicle that stopped in front of you starts
up again.
R You manoeuvre, turn the steering wheel
sharply or engage reve rsege ar.
% Ifth e system de tects an intelligent stop inhibi-
to r,fo rex ample, a stop sign, the engine will
not stop.
If yo u activate the HOLD function or engage
th e park position j,the engine can be
switched o. in spite of an intelligent stop
inhibitor. The engine
restarts au tomatically in thefo llowing
cases:
R You engage transmission position hork.
R You depress the accelerator pedal.
R The vehicle requ ires an automatic engine
start.
R Youre lease the brake pedal.
R V
V ehicles wit ehicles wit h a 48 V on-boar
h a 48 V on-boar d electr
d electrical sy
ical sys-
s-
t
t em:
em:
- Youre lease the brake pedal on a downhill
gr adient and theve hicle does not roll.
- The vehicle rolls on a downhill gradient and
does not automatically enter glide mode at
20 km/h.
ECO start/stop function symbols in the inst ru-
ment displa y:
R The symbol è(gre en) appears when the
ve hicle is at a standstill: The engine was
switched o. bythe ECO start/s top function.
R The symbol ç(yellow) appears when the
ve hicle is at a standstill: Not all vehicle condi-
tions for an engine stop ha vebeen met. 176
176
Driving and parking

R
longitudinal/lateral acceleration
R steering angle
R engine speed
R engine oil/tyre tempe rature
Based on the anal ysis yo u can check and optimise
driving characteristics for any position on the
trac k.
Expor
Expor ting tr
ting tr ack
acks (USB)
s (USB) #
õ Select Tracks.
An ove rview of all stored trac ksappears. #
Select the desired trac k. #
Select options uforth e desired trac k. #
Select Export.
The selec ted track can be expor tedto a USB
storage device connected totheve hicle.
Editing tr
Editing tr ack
acks and r
s and r ecor
ecordings
dings #
õ Select Tracks. #
Select the desired trac k. #
Select options uforth e desired trac k. #
Select Rename orDelete.
or #
Select a trac k. #
Highlight the desired recording. #
Select Zoptions. #
Select Exporting to… orDelete. Se
Se
tting Dr
tting Dr ag R
ag Race
ace Multimedia system:
4 TRACK PACE 5
Drag Race
Measur
Measur ing acceler
ing acceler ation
ation #
Select ZDrag Options. #
Select Acceleration. #
Set a starting speed or select Automatic.
Measurement begins as soon as the speci/ed
starting speed has been reached. #
Set a targetspeed.
Measu rement stops as soon as the speci/ed
targ etspeed has been reached. #
Pull away and startthe measurement.
Measurement begins when theve hicle accel-
erates. Measu
rement can be stopped ear lyby stopping
th eve hicle.
Quart
Quart er
er-mile r
-mile r ace
ace #
Select ZDrag Options. #
Select Quarter-mile . #
Set a targetdistance.
Measurement stops as soon as the speci/ed
targ etdistance has been reached. #
Pull away and startthe measurement.
Measurement begins when theve hicle accel-
erates. Timing runs until thetarg etdistance or
a maximum of one mile has been tr avelled.
Measurement can be stopped ear lyby stopping
th eve hicle.
Measur
Measur ing br
ing braking
aking #
Z Drag Options #
Select Braking. #
Set a starting speed or select Automatic. #
Pull away and startthe measurement. MBUX multimedia system
305
305

R
When the engine is oTen leT idling for long
periods
R Operation in particular lydusty conditions
and/or if air-recirculation mode is frequently
used
In these or similar operating conditions, ha vethe
interior air /lter, air /lter, engine oil and oil /lter,
fo rex ample, changed more frequentl y.Check the
tyres more frequently if theve hicle is operated
under increased st ress. Further information can
be obtained at a quali/ed specialist workshop. Batt
Batt
er
ery disconnection per
y disconnection per iods
iodsThe AS
SYST PLUS service inter val display can cal-
culate the service due date only when the battery
is connected. #
Display and no tedown the service due date
on the inst rument display before disconnect-
ing the battery (/ page 344). Engine com
Engine com
par
partment
tment A
A
ctiv
ctiv e bonne
e bonne t (pedes
t (pedestr trian pr ot
ian pr otection)
ection) Oper
Oper
ation of t
ation of t he activ
he active bonne
e bonne t (pedes
t (pedestr trian pr ot
ian pr otec-
ec-
tion)
tion)
In cer tain accident situations, the actuation of the
active bonnet reduces therisk of injury topedes-
trians. The rear area of the bonnet is raised by
appr oximately 80 mm.
ATer being triggered, the active bonnet remains in
th era ised position. Limited visibility due tothe
ra ised bonnet cannot be ruled out.
ATer the active bonnet has been actuated, pedes-
trian pr otection may be limited.
Ha ve the full functionality of the active bonnet
re stored immediatel y in aquali/ed specialist
wo rkshop.
If necessar y,adjust your seat position and drive
carefully toaqu ali/ed specialist workshop. If a
safe continued jou rney is not possible, contact a
qu ali/ed specialist workshop. Opening and closing t Opening and closing t
he bonnet
he bonn et &
W
WARNI NG
ARNI NGRisk of accident due todriving
with the bonnet unloc ked
The bonnet may open and blo ckyour vie w. #
Neverre lease the bonnet when driving. #
Before every trip, ensure that the engine
bonnet is loc ked. &
W
WARNING
ARNING Risk of accident and inju ry
when opening and closing the bonnet
The bonnet may suddenly drop into the end
position.
There is a risk of injury for an yone in the
engine bonnet's range of mo vement. #
Do not open or close the bonnet if there
is a person in the bonnet's range of
mo vement. Maintenance and care
345 345

R
Engine oil level OK andthe bar display for
indicating the oil le vel on the inst rument dis-
play is green and is between "min" and "max":
th e oil le vel is cor rect.
R Engine oil level Add 1,0 l andthe bar display
fo r indicating the oil le vel on the inst rument
display is orange and is below "min": #
Add 1 l of engine oil.
R Reduce engine oil level andthe bar display for
indicating the oil le vel on the inst rument dis-
play is orange and is abo ve"max": #
Drain o. any excess engine oil that has been
added. Todo so, consult a quali/ed specialist
wo rkshop.
R For engine oil level turn on ignition #
Switch on theve hicle tocheck the engine oil
le ve l.
R Engine oil level System inoperative: The oil
le ve l sensor is defective or not connected. #
Consult a quali/ed specialist workshop.
R Engine oil level System currently unavail. #
Close the bonnet.
T
T opping up engine oil
opping up engine oil &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. &
W
WARNING
ARNING Risk of /re and injury from
engine oil
If engine oil comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite. #
Make sure that no engine oil is spilled
next tothe /ller opening. #
Allow the engine tocool o. and thor-
oughly clean the engine oil from compo-
nent parts before starting theve hicle. *
N NOOTE
TE Engine damage caused byan inco r-
re ct oil /lter, incor rect oil or additi ves #
Do not use engine oils or oil /lters which
do not cor respond tothe speci/cations
ex plicitly prescribed forth e service inter-
va ls. #
Follow the inst ructions on the service
inter val display forch anging the engine
oil and obser vethe prescribed change
inter vals. #
Do not use additives. *
N NOOTE
TE Damage caused bytopping up too
much engine oil To
o much engine oil can damage the engine or
th e catalytic con verter. #
Have excess engine oil remo ved at a
qu ali/ed specialist workshop. 348
348
Main
tenance and ca re

%
Depending on driving style, theve hicle con-
sumes up to0.8 litre of oil per 1000 km. The
oil consum ption may be higher than this when
th eve hicle is new or if you frequently drive at
high engine speeds. 8-cylinder engine 6-cylinder engine
#
Turn cap 1anti-clockwise and remo veit. #
Top up the engine oil. #
Replace cap 1and turn it clockwise until it
engages. #
Check the oil le vel again (/ page 347). Chec
Chec
king t
king t he coolant lev
he coolant lev el
el &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. &
W
WARNING
ARNING Risk of scalding from hot cool-
ant
If yo u open the cap, you could be scalded. #
Let the mo tor cool down before opening
th e cap. #
When opening the cap, wear pr otective
glo ves and saf ety glasses. #
Open the cap slo wlytorelease pressure. #
Have the coolant checked or re/lled on lyat a
qu ali/ed specialist workshop. Main
tenance and ca re
349
349

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Á
Key not detected (white dis-
play message) *T
hekey is cur rently unde tected. #
Change the location of theke y in theve hicle. #
Ifth eke y is still not recognised, place it in the slot for starting with theke y (/ page 169).
Á Key not detected (red dis-
play message) *T
hekey cann otbe de tected and may no longer be in theve hicle.
If th eke y is no lon ger in theve hicle and you switch o. theve hicle:
R You can no longer start theve hicle.
R You cannot centrally lock theve hicle. #
Ensu rethat theke y is in theve hicle.
If th eke y is in theve hicle and still not recognised: #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Place theke y in the slot for starting the engine with theke y (/ page 169).
The key battery is weak or dischar ged. #
Check the battery using the indicator lamp (/ page 83). #
Replace theke y batter y,if necessary (/ page 85).418
418
Display message
s andwarning/indicator lamps