ad blue MERCEDES-BENZ B-CLASS HATCHBACK 2008 User Guide
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2008, Model line: B-CLASS HATCHBACK, Model: MERCEDES-BENZ B-CLASS HATCHBACK 2008Pages: 305, PDF Size: 5.1 MB
Page 293 of 305

Trailer coupling*
290 Trailer loads
B 150
B 150
BlueEFFICIENCY B 170
B 170
BlueEFFICIENCY B 200
B 200 TURBO B 180 CDI
B 200 CDI
Permissible trailer load, braked
44 1,000 kg 1,300 kg 1,500 kg 1,500 kg
Permissible trailer load, unbraked
44 645 kg 645 kg 645 kg 715 kg
Maximum drawbar noseweight
45 75 kg 75 kg 75 kg 75 kg
44
At a minimum gradient-climbing capability of 12% from a standstill.
45 The drawbar noseweight is not included in the trailer load. Technical data
* optional
245_AKB; 2; 7, en-GB
wdomann,
Version: 2.11.4 2008-10-17T11:22:31+02:00 - Seite 290Dateiname: 6515_1640_02_buchblock.pdf; preflight
Page 296 of 305

Service products and capacities
293Fuel consumption
The consumption figures have been determined according to applicable EU Directives and do not refer to one specific vehicle. Deviations
from these values may occur under normal operating conditions. Manual transmission B 150 B 150
BlueEFFICIENCY B 170 B 170
BlueEFFICIENCY Urban
8.3 – 8.5 l/100 km 7. – 8.0 l/100 km 8.6 – 9.0 l/100 km 7.9 – 8.1 l/100 km
Extra-urban
5.6 – 5.8 l/100 km 5.4 – 5.6 l/100 km 5.8 – 6.0 l/100 km 5.5 – 5.6 l/100 km
Overall (NEDC)
6.6 – 6.8 l/100 km 6.2 – 6.5 l/100 km 6.8 – 7.1 l/100 km 6.4 – 6.5 l/100 km
CO
2emissions 158 – 163 g/km 148 – 154 g/km 163 – 171 g/km 152 – 156 g/km
Manual transmission B 200 B 200 Turbo
Urban
9.3 – 9.6 l/100 km 10.5 – 10.7 l/100 km
Extra-urban
6.0 – 6.3 l/100 km 6.4 – 6.6 l/100 km
Overall (NEDC)
7.2 – 7.5 l/100 km 7.9 – 8.1 l/100 km
CO
2emissions 173 – 180 g/km 190 – 195 g/km
Manual transmission B 180 CDI B 200 CDI
Urban
6.4 – 6.6 l/100 km 6.8 – 7.1 l/100 km
Extra-urban
4.4 – 4.6 l/100 km 4.5 – 4.6 l/100 km Technical data
245_AKB; 2; 7, en-GB
wdomann,
Version: 2.11.4 2008-10-17T11:22:31+02:00 - Seite 293 Z
7 Dateiname: 6515_1640_02_buchblock.pdf; preflight
Page 298 of 305

Service products and capacities
295Engine oil
A list of engine oils tested and approved in accordance with the Mercedes-Benz Specifications for Service Products is available from any
Mercedes-Benz Service Centre. Engine oils which have been approved by Mercedes-Benz have the MB Sheet number indicated on the oil
container. The table shows which MB Sheet Number applies to which engine: B 150
B 150 BlueEFFICIENCY B 170
B 170 BlueEFFICIENCY B 200 B 200 Turbo
MB Sheet Number
229.3/229.31
229.5/229.51 229.3/229.31
229.5/229.51 229.3/229.31
229.5/229.51 229.3/229.31
229.5/229.51
With a diesel particulate filter B 180 CDI B 200 CDI
MB Sheet Number
228.51/229.31/229.51 228.51/229.31/229.51
Without a diesel particle filter
46 B 180 CDI B 200 CDI
MB Sheet Number
228.3/228.5/228.51
229.3/229.31/229.5/229.51 228.3/228.5/228.51
229.3/229.31/229.5/229.51 46
Only for certain countries. Technical data
245_AKB; 2; 7, en-GB
wdomann,
Version: 2.11.4 2008-10-17T11:22:31+02:00 - Seite 295 ZDateiname: 6515_1640_02_buchblock.pdf; preflight
Page 299 of 305

Service products and capacities
296
i
In the event that the:
R engine oil brand
R grade (MB Sheet number)
R SAE classification (viscosity)
is not available, you can use another min-
eral or synthetic engine oil which has been
approved by Mercedes-Benz. Mixing oils reduces the benefits of high-
grade engine oil.
! Do not use lubricant additives as they can
lead to increased wear and damage to
mechanical assemblies. The use of lubri-
cant additives will result in a restriction of
your warranty. !
Engine oils for vehicles without a diesel
particle filter may also be used temporarily
in vehicles with a diesel particle filter if the
engine oil listed is not available. You must
then have an oil change carried out as soon
as possible.
Capacities The following values refer to an oil change including the oil filter.
Engine with oil filter B 150
B 150 BlueEFFICIENCY B 170
B 170 BlueEFFICIENCY B 200
Replacement amount
5.0 l 5.0 l 5.0 l
Engine with oil filter B 200 Turbo B 180 CDI B 200 CDI
Replacement amount
5.0 l 5.4 l 5.4 lTechnical data
245_AKB; 2; 7, en-GB
wdomann,
Version: 2.11.4 2008-10-17T11:22:31+02:00 - Seite 296Dateiname: 6515_1640_02_buchblock.pdf; preflight
Page 301 of 305

Service products and capacities
298
Capacities The following values indicate the total cooling system capacities.
B 150
Manual trans- mission B 150
BlueEFFICIENCY B 150
AUTOTRONIC* B 170
Manual trans- mission B 170
BlueEFFICIENCY B 170
AUTOTRONIC* Coolant
6.3 l 6.3 l 6.5 l 6.3 l 6.3 l 6.6 l
Amount of antifreeze/corrosion inhibitor required for antifreeze protection
Down to
–37 †(approx.
50%)
3.2 l 3.2 l 3.25 l 3.2 l 3.2 l 3.0 l
Down to
–45 †(approx.
55%)
3.5 l 3.5 l 3.6 l 3.5 l 3.5 l 3.65 l
B 200 B 200
TURBO B 180 CDI B 200 CDI
Coolant
6.6 l 8.5 l 8.0 l 9.7 lTechnical data
* optional
245_AKB; 2; 7, en-GB
wdomann,
Version: 2.11.4 2008-10-17T11:22:31+02:00 - Seite 298Dateiname: 6515_1640_02_buchblock.pdf; preflight