maintenance MERCEDES-BENZ B-CLASS HATCHBACK 2021 Owner's Manual

&
W
W ARNI NG
ARNI NG‑ Risk of /re and injury due to
windscreen washer concent rate
Wi ndsc reen washer concent rate is highly 0am-
mable. It could ignite if it comes into contact
with hot engine component parts or the
ex haust system. #
Make sure that no windscreen washer
concent rate spills out next tothe /ller
opening. #
Remo vecap 1bytheta b. #
Top up thewa sher 0uid.
% Further information about the windscreen
wa sher 0uid (/ page 404) K K
eeping t
eeping t he air
he air-w
-wat
ater duct fr
er duct fr ee
ee #
Keep the area between the bonnet and the
windscreen free of deposits, e.g. ice, snow
and lea ves. Cleaning and care
Cleaning and care
Inf
Inf
or
ormation on w
mation on w ashing t
ashing the v
he vehicle in a car w
ehicle in a car w ash
ash &
W
WARNING
ARNING Risk of an accident due to
re duced braking po wer aTer washing the
ve hicle
Braking e1ciency is reduced aTer washing the
ve hicle. #
ATer theve hicle has been washed, brake
carefully while paying attention tothe
tra1c conditions until braking po wer has
been fully restored. Maintenance and ca
re
343
343

*
N
NO
OTE
TE Damage from automatic braking If one of
thefo llowing functions is switched
on, theve hicle brakes automatically in cer tain
situations:
R Active Brake Assist
R Active Distance Assist DISTRONIC
R HOLD function
R Active Parking Assist
To avoid damage totheve hicle, deactivate
th ese systems in thefo llowing or similar situa-
tions: #
during towing #
in a car wash *
N
NOOTE
TE Damage due tounsuitable car wash #
Before driving into a car wash make sure
th at the car wash is suitable forth eve hi-
cle dimensions. #
Ensu rethere is su1cient ground clear-
ance between the underbody and the
guide rails of the car wash. #
Ensure that the clearance width of the
car wash, in particular the width of the
guide rails, is su1cient. To
avo id damage toyour vehicle when using a car
wa sh, ensu rethefo llowing beforehand:
R Active Distance Assist DISTRONIC is deactiva-
te d.
R The HOLD function is switched o..
R The side windo wsand sliding sunroof are com-
ple tely closed.
R The blo werfo rth eve ntilation/heating is
switched o..
R The windsc reen wiper switch is in position 005A.
R The key is at a minimum dis tance of 3 m away
from theve hicle. Otherwise theta ilgate could
open unintentionall y.
R In automatic car washes with con veyo r sys-
te ms:
- Neutral 005Cis engaged. -
V Vehicles wit ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: If
yo uwo uld like tolea vetheve hicle while it
is being washed, make sure theke y is
located in theve hicle. The park position
005D isotherwise automatically engaged.
% If, aTer the car wash, youre mo vethewax
from the windscreen and wiper rubbers, this
will pr event smearing and reduce wiper noise.
A
A ut
ut omatic car w
omatic car w ash mode
ash mode
In car wash mode, theve hicle is prepared for driv-
ing into the automatic car wash. Car wash mode
can be activated at a speed of up to20 km/h
Ac tivate (/ page 345).
The following settings are made when car wash
mode is activated:
R The outside mir rors are folded in.
R Topreve ntthe windscreen washer system
from starting up automaticall y,thera in sensor
is deactivated.
R The rear wind owwiper is deacti vated.
R The windo wsand the sliding sunroof are
closed. 344
344
Maintenance and care

R
The air conditioning system is set toair-recir-
culation mode.
R Parking Assist PARKTRONIC is deactivated.
R V
V ehicles wit
ehicles wit h 360° Camer
h 360° Camer a:
a:the front image is
activated aTer appr ox. eight seconds.
If one of the settings cannot be selected, this is
displa yedby a% behind there specti veset-
ting.
Ab ove a speed of 20 km/h Car wash mode is
automatically deacti vated.
The following settings are reset when car wash
mode is deacti vated:
R The outside mir rors are folded out.
R The rain sensor is activated.
R The rear wind owwiper is activated.
R The air conditioning system is set tofresh air
mode.
R Parking Assist PARKTRONIC is reset tothe
pr ev iously selected setting.
R The windo wsand the sliding sunroof remain
closed. R
V
V ehicles wit ehicles wit h 360° Camer
h 360° Camer a:
a:the front image is
deactivated at speeds abo ve18 km/h. A
A
ctiv
ctiv ating/deactiv
ating/deactiv ating aut
ating automatic car w
omatic car w ash mode
ash mode R
R
eq
eq uir
uir ements:
ements:
R theve hicle is stationar y.
R the engine is running.
Multimedia system: 4 © 5
Settings 5
Quick access
A
A ctiv
ctiv ating aut
ating aut omatic car w
omatic car w ash mode
ash mode #
Select Car wash mode . #
Select Start.
If one of the settings cannot be selected, this is
displa yedby a% behind there specti veset-
ting.
% For an overview of the settings made when
activating automatic car wash mode
(/ page 343). Deactiv Deactiv
ating aut
ating aut omatic car w
omatic car w ash mode
ash mode #
Select Stop.
The automatic car wash settings are reset.
% The automatic car wash mode is automatically
deacti vated as soon as a speed of 20 km/h is
ex ceeded. Inf
Inf
or
ormation on using a high-pr
mation on using a high-pr essur
essure cleaner
e cleaner &
W WARNING ARNING Risk of an accident when using
high-pressure cleane rswith round-spr ay
nozzles
The water jet can cause extern ally invisible
damage.
Components damaged in this wa y may un ex-
pectedly fail. #
Do not use a high-pressure cleaner with
round-spr aynozzles. #
Have damaged tyres or chassis parts
re placed immediatel y. Maintenance and ca
re
345 345

R
Do not polish theve hicle and light-alloy
wheels.
R Only use car washes that cor respond tothe
latest engineering standards.
R Do not use car wash prog rammes with a /nal
hot wax treatment.
R Do not use paint cleaners, bu1ng or polishing
products, gloss preser vers, e.g. wax.
In theev ent of paintwork damage:
R Always ha vepaintwork repairs car ried out at a
qu ali/ed specialist workshop.
R Make sure thera dar sensors function
(/ page 223). N
No
ot
tes on cleaning decor
es on cleaning decor ativ
ative f
e foils
oils Obser
vethe no tes on matt /nish care in thech ap-
te r "No tes on paintwork/matt /nish paintwork
care" (/ page 346). They also apply tomatt dec-
orative foils.
Obser vethe no tes on cleaning decorative foils to
av oid vehicle damage. Cleaning
Cleaning
R For cleaning, use plenty of water and a mild
cleaning agent without additives or abrasive
substances, e.g. a car shampoo appr ovedfor
Mercedes-Benz.
R Remo vedirt immediatel y,where possible,
whilst avoiding rubbing too hard. There is oth-
erwise a risk of damaging the decorative foil
ir re parabl y.
R Ifth ere is dirt on the /nish or if the decorative
fo il is dull: Use thePa int Cleaner recommen-
ded and appr ovedfo r Mercedes-Benz.
R Insect remains: Soak with insect remo ver and
ri nse o. the treated areas aTer wards.
R Bird droppings: Soak with water and rinse o.
aTer wards.
R Topreve ntwa ter stains, dry a foil-wrapped
ve hicle with a soT, absorbent clo thaTer every
car wash.
Av Av oiding damag
oiding damag e t
e to t
o t he decor
he decor ativ
ative f
e foil
oil
R The service life and colouring of decorative
fo ils are impaired by:
- Sunlight -
Tempe rature, e.g. hot air blo wer
- Weather conditions
- Stone chippings and dirt
- Chemical cleaning agents
- Oily products
R Do not use polish on matt decorative foil. Po l-
ishing will ha vethe e.ect of shining thefo il-
wrapped sur face.
R Do not treat matt or st ructured decorative
fo ils with wax.Pe rm anent stains may occur.
Scratches, cor rosive deposits, areas a.ected by
cor rosion and damage caused byincor rect care
cannot alw ays be comple tely re paired. In such
cases, visit a quali/ed specialist workshop.
Yo u can obtain more information on care and
cleaning products from the manufacturer.
In the case of foil-wrapped sur faces, optical di.er-
ences may occur between the sur faces that we re
not pro tected bya decorative foil aTer removing a
decorative foil. Maintenance and care
347
347

%
Have workor repairs todecorative foils car-
ri ed out at a quali/ed specialist workshop,
e.g. in a Mercedes-Benz Se rvice Centre. N
No
ot
tes on car
es on car e of car par
e of car par ts
ts &
W
WARNING
ARNING Risk of entrapment if the wind-
screen wipers are switched on while the
windscreen is being cleaned
If th e windscreen wipers are set in motion
while you are cleaning the windscreen or
wiper blades, you can be trapped bythe wiper
arm. #
Always switch o. the windscreen wipers
and theve hicle before cleaning the wind-
screen or wiper blades. &
W
WARNING
ARNING Risk of burns from theta ilpipe
and tailpipe trims
The exhaust tailpipe and tailpipe trims can
become very hot. If you come into contact
with these parts of theve hicle, you could burn
yo urself. #
Always be particular lycareful around the
ta ilpipe and theta ilpipe trims and super-
vise children especially closely in this
area. #
Allow vehicle parts tocool down before
to uching them. To
avo id damage totheve hicle, obser vethe no tes
on cleaning and care of thefo llowing vehicle
parts:
Wheels and r Wheels and r ims
ims
R Use water and acid-free alloy wheel cleaners.
R Do not use acidic alloy wheel cleaners to
re mo vebrake dust. This could damage wheel
bolts and brake components.
R Toavo id cor rosion of the brake disks and
brakepads, drive theve hicle for a few minu tes
aTer cleaning before parking it. The brake
disks and brakepads warm up and dry out.
W W indo ws
indo ws
R Clean the windo wsinside and outside with a
damp clo thand with a cleaning agent recom-
mended for Mercedes-Benz. R
Do not use dry clo ths or abrasive or sol vent-
based cleaning agents toclean the inside of
windo ws.
% ATer changing the wiper blades or treating
th eve hicle with wax, clean the windscreen
th oroughly with cleaning agents recommen-
ded for Mercedes-Benz. Failure toobser vethe
application instructions may result in damage,
smear mar ksor dazzling spots.
% Remo veextern al fogging or dirt on the wind-
screen in front of the multifunction camera.
Otherwise, driving systems and driving saf ety
systems may be impaired or not available
(/ page 223).
W
W iper blades iper blades
R Movethe wiper arms into there placement
position (/ page 150).
R With th e wiper arms folded out, clean the
wiper blades with a damp clo th.
% Make sure that the wiper blades are coated.
The coating can lea veresidues on a clo th. Do
not rubth e wiper blades excessively or clean
th em too oTen. 348
348
Maintenance and care

Seat belts
Seat belts
R Clean wi thluk ewa rmand soapy water.
R Do not use chemical cleaning agents.
R Do not dry byheating them toove r 80°C or
ex posing them todirect sunlight.
Display
Display
R Switch o. the display and let it cool down.
R Clean the sur face carefully with a micro/bre
clo thand a suitable displ aycare product (TFT-
LC D).
R Do not use any other agents.
Head-up displ ay
Head-up display
R Clean with a soT, non-static, lint-free clo th.
R Do not use cleaning agents.
Plas
Plastic tr tic tr im
im
R Clean with a damp micro/bre clo th.
R For heavy soiling: Use a cleaner recommen-
ded for Mercedes-Benz.
R Do not attach stic kers, /lms or similar materi-
als. R
Do not allow cosmetics, insect repellent or
sun cream tocome in contact with the plastic
trim.
R
R eal w
eal w ood and tr
ood and tr im elements
im elements
R Clean with a micro/bre clo th.
R Blackpiano-lacquer look: Clean with a damp
clo thand soapy water.
R For heavy soiling: Use a cleaner recommen-
ded for Mercedes-Benz.
R Do not use sol vent-based cleaning agents, pol-
ishes or waxes.
R
R oof lining
oof lining
R Clean with a brush or dry shampoo.
Car
Car pet
pet
R Use a carpet and textile cleaning agent recom-
mended for Mercedes-Benz.
St
St eer
eer ing wheel made of g
ing wheel made of g enuine leat
enuine leather or DINA-
her or DINA-
MICA
MICA
* NO
NOTE
TEDamage caused bywrong cleaners #
Do not use sol vent-based cleaning
agents such as tarre mo ver or wheel cleaner; neither should
you use polishes
or wa xes. Otherwise you may damage
th e /nish. R
Clean with a damp clo thand 1% soapy water
solution and then wipe with a dry clo th.
R For heavy soiling: Use a cleaner recommen-
ded for Mercedes-Benz.
R Leather care: Use a leather care agent that
has been recommended for Mercedes-Benz.
R Do not allow the leather tobecome too damp.
R Do not use a micro/bre clo th.
% Leather is a natural product. It has natural
surface properties, such as di.erences in
st ru cture, mar kscaused bygrow thand injury
or subtle colour di.erences. These sur face
properties are characteristics of leather and
not material faults. What's more, leather is
subject toa natural ageing process during
which the sur face properties change.
Genuine leat
Genuine leat her seat cov
her seat cov ers ers
R Clean with a damp clo thand then wipe with a
dry clo th. 350
350
Maintenance and care

R
Leather care: Use a leather care agent that
has been recommended for Mercedes-Benz.
R Do not allow the leather tobecome too damp.
R Do not use a micro/bre clo th.
% Regular cleaning and care ofthe leather
re duces soiling, wear mar ksand ageing dam-
age and thus signi/cant lyex tends its life
span. Clo thing that can lea vestains, e.g.
jeans, can le ave discolouration on the leather.
DIN
DINAMIC AMIC A seat cov
A seat cov ers
ers
R Clean with a damp clo th.
R Do not use a micro/bre clo th.
Imit
Imit ation leat
ation leat her seat cov
her seat cov ers
ers
R Clean with a damp clo thand 1% soapy water.
R Do not use a micro/bre clo th.
F
F abr
abr ic seat cov
ic seat cov ers
ers
R Clean with a damp micro/bre clo thand 1%
soapy water and allow todry. Maintenance and ca
re
351
351

At
a dis tance of app roximately 1 m tothe tyre
in0ation compressor and appr oximately 1.6 m
abo vethegr ound, thefo llowing sound pres-
sure le vels appl y:
R Emission sound pressure le vel L
PA 83 dB
(A)
R Sound po wer le vel L
WA 91 dB (A)
The tyre in0ation compressor is maintenance-
free. If there is a malfunction, please contact
a qu ali/ed specialist workshop. TIREFIT kit st TIREFIT kit st
or
orag
ag e location
e location The TIREFIT kit is located under
the load compart-
ment 0oor on theright-hand side.
% You can /nd information on the po wer cate-
gory (LK) and/or electrical data on the back
of the tyre in0ation compressor:
R LK2 – 12 V/15 A,180 W,0.8 kg At
a dis tance of app roximately 1 m tothe tyre
in0ation compressor and appr oximately 1.6 m
abo vethegr ound, thefo llowing sound pres-
sure le vels appl y:
R Emission sound pressure le vel L
PA
83 dB(A)
R Sound po wer le vel L
WA 91 dB(A)
The tyre in0ation compressor is maintenance-
free. If there is a malfunction, please contact
a qu ali/ed specialist workshop. Using t
Using t
he TIREFIT kit
he TIREFIT kit R
R
eq
eq uir
uir ed t
ed t ools:
ools:
R Tyre sealant bottle
R TIREFIT stic ker
R Sticke r with de tails of the maximum permissi-
ble speed
R Tyre in0ation compressor
R Gloves
TIREFIT kit storage location: (/ page 356, 355)Yo
u can use TIREFIT tyre sealant toseal per fora-
tion damage of up to4 mm, particular lythose in
th e tyre contact sur face. You can use TIREFIT in
outside temp eratures down to-20°C. &
W
WARNING
ARNING Risk of accident when using
tyre sealant
The tyre sealant may be unable toseal the
tyre proper ly, especially in thefo llowing cases:
R there are lar gecuts or punctures in the
tyre (la rger than damage pr eviously men-
tioned)
R the wheel rims ha vebeen damaged
R aTer journe yswith very low tyre pressure
or with 0at tyres #
Do not continue driving. #
Consult a quali/ed specialist workshop. &
W WARNING
ARNING Risk of injury and poisoning
from tyre sealant
Ty re sealant is hazardous tohealth and causes
ir rita tion. Do not allow it tocome into contact 356 356
Breakdown assistance

Do not drive with tyres
that ha vetoo little tread
dep th. This signi/cantly reduces traction on wet
ro ads (aquaplaning).
On vehicles with the same front and rear wheel
size, you can inter change the wheels every
5,000 to10,000 km, depending on thewe ar.
Ensu rethe direction of rotation is maintained for
th e wheels.
Obser vethe inst ructions and saf ety no tes on
"Changing a wheel" when doing so (/ page 383).N
No
ot
tes on st
es on st or
oring wheels
ing wheels When storing wheels, obser
vethefo llowing no tes:
R ATer removing wheels, store them in a cool,
dry and preferably dark place.
R Protect the tyres from contact with oil, grease
or fuel. Ov Ov
er
ervie
vie w of t
w of t he tyr
he tyr e-c
e-chang
hang e t
e tool kit
ool kit Apart from some count
ry-speci/c variants, vehi-
cles are not equipped with a tyre-change tool kit.
Fo r more information on which tyre-changing to
ols are requ ired and appro vedfo r per form ing a
wheel change on your vehicle, consult a quali/ed
specialist workshop.
Yo ure qu ire thefo llowing tools, forex ample, to
ch ange a wheel:
R Jack
R Chock
R Wheel wrench
R Centring pin
% The jack weighs appr oximately 3.4 kg.
The maximum load capacity of the jack can
be found on the stic ker a1xed tothe jac k.
The jack is maintenance-free. If there is a
malfunction, please contact a quali/ed spe-
cialist workshop.
The tyre-change tool kit is located in tool bag 1
in the load compartment.
% Depending on theve hicle equipment, theto ol
bag may be located in other positions in the
load compartment. The
tool bag contains:
R Jack
R Gloves
R Wheel wrench
R Centring pin
R Folding chock
R Ratchet for jack Pr Pr
epar
epar ing t
ing the v
he vehicle f
ehicle f or a wheel c
or a wheel c hange
hange R
R
eq
eq uir
uir ements:
ements:
R The vehicle is not on a slope. Wheels and tyres
383
383

is being
changed and not for maintenance
wo rkunder theve hicle.
R The jack must be placed on a /rm, 0at and
non-slip sur face. If necessar y,use a lar ge, 0at,
load-bearing, non-slip underla y.
R The foot ofthe jack must be positioned verti-
cally under the jack support point. Ru
les of conduct when theve hicle is raised:
R Never place your hands or feet under theve hi-
cle.
R Never lie under theve hicle.
R Do not start theve hicle and do not release the
electric parking brake.
R Do not open or close any doors or theta ilgate. #
Using the wheel wrench, loosen the wheel
bolts on the wheel you wish tochange by
about one full turn. Do not unscr ewthe
scr ews comple tely. Wheels and tyres
385 385