light MERCEDES-BENZ C-Class 2004 W203 Comand Manual

217
Info Services*/System settings
System settings
If the settings menu is displayed
Turn the right-hand rotary/push-button
v to highlight “Factory settings” and
press to confirm.
An inquiry menu will appear. “Yes” is
highlighted.
Accepting the factory settings

Press the right-hand rotary/push-
button v.
A screen with the factory setting will
appear for 8 seconds.
The main system settings menu is reac-
tivated.The factory settings are:

Acknowledgement beep – off

Info beep – off

Language – English (imp.)

Time display – 24 h

Date format –DD.MM (day, month)
If you do not wish to reset to factory
settings

Turn the right-hand rotary/push-button
v to highlight “No” and press to con-
firm.
The main system settings menu will ap-
pear.
Resetting all settings to the
factory settings
P82.85-7723-31

219
Info Services*/System settings
Auxiliary audio source

Turn the right-hand rotary/push-button
v to highlight “Aux” in the main sys-
tem settings menu and press to con-
firm.
The “Aux” menu will appear. The auxili-
ary audio source will switch on if it has
been connected to the COMAND cont-
rol unit.
Adjusting the volume (
page 14).Adjusting the volume level of an auxilia-
ry audio source

Adjust volume of vehicle radio to a
comfortable listening level.

Connect adapter cable to portable tape
deck and to vehicle (socket in glove
box).

Press ( button on COMAND unit.

Activate the “Aux” menu as described.

Press “Play” button on the portable
tape deck.

Adjust the volume on the portable tape
deck so that the audio system output is
at or near the same comfortable level
previously set in radio mode.

Volume can now be adjusted using
either COMAND or volume controls on
multifunction steering wheel.Muting auxiliary audio source

Press Ö.
Symbol R will appear.
Canceling mute function

Press Ö again.
Symbol R will disappear.
iThe sound adjustments for the auxiliary
audio source are independent of those
selected for the COMAND audio sour-
ces.
iOnly the volume setting of the tape play-
er can be controlled using the
COMAND system.