battery MERCEDES-BENZ C-Class 2005 W203 Comand Manual

48 AudioCD operationLoading CDs into the CD changer*
The CD changer* is located in the glove
box. Open panel cover to access the CD
changer*.
Removing the magazine:
Slide the cover of the CD changer*
open.

Press the green l button on the
CD changer*.
The magazine will slide out. The
message
No magazine
will appear on
the COMAND.Inserting CDs:

Pull the disk tray forward until it stops.

Place a CD in the tray. The CD should
be inserted with the label side up.

Push the CD tray into the magazine
completely.

Repeat these three steps to load more
CDs into the magazine.Reading the magazine in:

Slide the magazine into the CD
changer* until it clicks into place
(listen for the click).

Slide the cover of the CD changer*
closed.
iYou can also slide out the magazine if
COMAND is switched off.
However, the l button will not
function if the vehicle battery is not
connected or discharged.
iWhen you push the magazine in, the
arrow on the upper side of the
magazine must point in the direction of
the CD changer*.

48 AudioCD operationLoading CDs into the CD changer*
The CD changer* is located in the glove
box. Open panel cover to access the CD
changer*.
Removing the magazine:
Slide the cover of the CD changer*
open.

Press the green l button on the
CD changer*.
The magazine will slide out. The
message
No magazine
will appear on
the COMAND.Inserting CDs:

Pull the disk tray forward until it stops.

Place a CD in the tray. The CD should
be inserted with the label side up.

Push the CD tray into the magazine
completely.

Repeat these three steps to load more
CDs into the magazine.Reading the magazine in:

Slide the magazine into the CD
changer* until it clicks into place
(listen for the click).

Slide the cover of the CD changer*
closed.
iYou can also slide out the magazine if
COMAND is switched off.
However, the l button will not
function if the vehicle battery is not
connected or discharged.
iWhen you push the magazine in, the
arrow on the upper side of the
magazine must point in the direction of
the CD changer*.

166 GlossaryPIN code
Your PIN code prevents unauthorized
persons from using your GSM mobile
phone. The PIN code is a number
string, which you have to enter when
switching on the telephone.
Provider
is the network operator who makes
available (provides) telephone services
Roaming
For this function, the telephone uses
the telephone network of a contract
partner. There are home type and non-
home type systems. The ROAMING
indicator in the COMAND display indi-
cates that a call is being made using a
non-home type system.
Service source
This includes the systems telephone*
and navigation (voice output during
destination guidance)SMS
(S
hort M
essage S
ervice)
With this function you can receive and
read short text messages (if SMS ser-
vice is provided by your provider)
Soft keys
Keys that activate different functions.
Function of key depends on the selec-
ted operating mode.
Tele Aid*
(Tele
matic A
larm I
dentification on D
e-
mand)
The Tele Aid system consists of three
types of response: automatic and ma-
nual emergency, roadside assistance,
and information. Tele Aid is initially
activated by completing a subscriber
agreement and placing an acquain-
tance call. Refer also to the vehicle
operating instructions.The Tele Aid system is operational pro-
vided that the vehicle’s battery is char-
ged, properly connected, not damaged,
and cellular and GPS coverage is avai-
lable.
Unlock code
Your unlock code prevents unauthori-
zed persons from using your telephone.
The unlock code is a number string,
which you have to enter when switch-
ing on the telephone, if you have locked
the phone before or the setting of the
phone lock is automatically.
Voice output
During a trip, apart from visual informa-
tions (symbol or map displays),
COMAND also provides all of the
necessary spoken route information
via voice output.