instrument cluster MERCEDES-BENZ C-Class 2005 W203 Comand Manual

162 System settingsSystem settingsOption
Instr. cluster setting
COMAND will use the same language as is
set in instrument cluster.
Push the joystick to g or G to
select the desired language.

Press E.
The System settings menu will appear
with the display text in the language
selected.

In the System settings menu, press the Tones
soft key.
The Tones menu will appear.

Push the joystick to g or G to
select an entry.

Press E.
The respective tones are activated or
deactivated. You hear the tone when
you activate it.

Press the
Back
soft key.
The System settings menu will appear.
The setting is saved.
Switching verification and
notification tones on and offOption
Symbol
Tone activated
Q
Tone deactivated
q

164 System settingsSystem settingsor
Press the
Bright
. soft key longer than
2 seconds.
The display brightness changes
gradually. When the slider reaches the
end of the left or right border, it starts
moving into the opposite direction.

Release the
Bright.
soft key.
Confirming the setting

Press the
Back
soft key.
or

Press E.
The brightness setting is applied.

In the System settings menu, press the Reset
soft key.
The Reset inquiry menu will appear.
No

is highlighted.If you do not wish to reset to the factory
settings

Press the
Back
soft key or press E.
The System settings menu will appear.
Accepting the factory settings

Push the joystick to H or h
direction to select
Yes
.

Press E.
The message
All data has been
reset.
COMAND will now
restart. will appear.
Resetting all settings to the factory
settingsiAll your personal data, e.g. Last desti-
nation entries or Radio main menu pre-
set entries, will be deleted.
iThe factory settings are:
Time - Atlantic Time
Language - Instrument cluster
Verification tone - On
Notification tone - On
Display setting - Automatic