Media MERCEDES-BENZ C-Class 2008 W204 Comand Manual

64 Audio
CD audio/DVD audio and MP3
To switch to the next folder up: Se-
lect theQsymbol.
The display changes to the next folder
up.
1Disc name (if stored on disc)
2Current folder
3Folder symbolTo select a folder: Rotate ymz or
slide qmr.
Press n.
The tracks of the folder appear.
To select a track: Rotate ymz or slide
qmr.
Press n.
The track is played, the corresponding
folder is now the active folder.
i The function is only available in CD audio
mode.
CD information, including album title, artist
name and track name, is obtained from the
Gracenote
® Media Database. A version of
the Gracenote® Media Database is stored
on the COMAND’s hard drive. Access to
this database is indicated by the
Gracenote logo being displayed in the low-
er right of some audio displays.
Gracenote Media Database

65 Audio
CD audio/DVD audio and MP3
Many audio CDs contain CD text.
COMAND uses the information contained
in this text for displaying the name of the
artist, album and track.
If the audio CD does not contain any CD
text, COMAND can recognise unknown
audio tracks in CD audio mode with the aid
of the Gracenote Media Database. For this
to happen, the corresponding information
must be stored in the Gracenote Media
Database and the “Read CD Database”
function must be switched on.
If this is the case, COMAND provides the
corresponding data, such as name of art-
ist, album and track, in the corresponding
displays and lists.
If COMAND accesses the Gracenote Media
Database while reading an audio CD, the
following information is displayed:Switching ‘Read CD database’ function
on and off
Switching to CD audio mode
(

page 60).
Select “CD” K “Read CD Database”.
Depending on the previous status, the
function will be switched off C or on D.Updating the Gracenote
® Media
Database
As new music CD releases occur it is nec-
cessary to update the Gracenote Media
Database. Optimum Gracenote
®
music recognition function is only
achieved when the most up-to-date data-
base is available in your vehicle.
You can have the music recognition soft-
ware updated at an Authorized Mercedes-
Benz center by means of a DVD or, perform
the update process yourself.
i The Gracenote® Media Database is updated
at the same time as the map software
(

page 113).

67 Audio
Music Register
You can record tracks from audio CDs and
store them as MP3 files in the Music Reg-
ister. The memory capacity is 4 GB.
! Keep your original music files in a safe
place. A fault with the COMAND may cause the
music files stored in the Music Register to be
lost. Mercedes-Benz USA, LLC is not liable for
any loss of data.
From another main function
Select “Audio” K “Audio” K “Music
Register” in the display with Audio
menu (

page 40).
i If “Music Register” was active last, you only
need to select “Audio”.
Within the audio function
Select “Audio” K “Music Register”.
The Music Register is loaded. The Mu-
sic Register display appears.
No music files available:
A message will be displayed.
First record music files to the Music
Register (

page 68).
Music files available:
You will hear the first track of the first
folder found or playback will start from
the point listened to last.
Example display: Music Register
1Storage media type - Music Register
N
2Track number
3Track name
4Elapsed track time
5Visual time and track display
6Current playback option
7Sound settings
8Media selection
9Folder functions
aCurrent folder
bStorage medium position in the media
list
cCalls up Music Register menu
Music RegisterSwitching to Music Register

68 Audio
Music Register
i CD information, including album, title, artist
name and track name is obtained from the
Gracenote
® Media Database (
page 64).
In the “Disc” submenu select “REC”.
The Record menu appears on the sub-
menu.
Selecting tracks to be recorded
Rotate ymz or slide omp until
“Tracks” is highlighted.
Press n.
Select tracks to be recorded by switch-
ing the check mark next to each track
entry on or off.
1Record all tracks (default)
2Option for selecting individual tracks
3Confirm selection
i If you do not select individual tracks before
recording, all tracks on the CD will be recorded.
Selecting a destination folder
Rotate ymz or slide omp until
“Folder” is highlighted.
Press n.
1Create new folder (default)
2Existing folders
3Currently active folder
To select folder: Rotate ymz or slide
qmr.
Press n.
i If you do not select a destination folder be-
fore recording, a new folder will be created.
Recording music files

74 Video
DVD video
If the vehicle is travelling faster than ap-
proximately 3 MPH, the picture will switch
off automatically in DVD video mode.
The following message will then appear in
the display: “In order not to distract you
from the traffic situation, the picture is fad-
ed out while the vehicle is in motion.”.
As soon as the speed falls below approxi-
mately 3 MPH, the picture switches back
on again.
i When playing copied discs, problems may
occur with the playback.
A wide variety of disc-writing software and writ-
ers are available. Due to this variety we cannot
guarantee that the system will be able to play
discs that you have written/copied yourself
! Do not attach stickers or labels of any kind
to discs. They may come loose and damage
COMAND. Labels may also cause the disc to
bend, which may result in reading errors and
problems with disc recognition.
! COMAND has been designed for discs meet-
ing the requirements of standard EN 60908.
Therefore, only discs with a maximum thickness
of 1.3 mm can be used.
If a thicker disc is inserted, e. g. one which stores
data on both sides, (DVD on one side, audio data
on the other side), this cannot be ejected and
COMAND will be damaged.
Do not use 8 cm diameter discs, not even with an
adapter.
Only use round, 12 cm diameter discs.

Only touch the discs at the edges.

Handle discs with care in order to pre-
vent malfunctions during playback.

Avoid scratching, leaving fingerprints
and dust on the discs.

Clean the discs occasionally with a
commercially available cleaning cloth.
Always wipe in a straight line from the
inside outwards, never in a circular mo-
tion.

The discs must only be labelled using
pens specially designed for this pur-
pose.
DVD video
Safety instructions
G Warning
COMAND is classified as a Class 1 laser
product. You must not open the casing.
There is a risk of exposure to invisible laser
laser radiation if you open the casing, or if
the casing is faulty or damaged.
COMAND does not contain any parts that
you are able to maintain yourself. For safety
reasons, all maintenance work must be car-
ried out by qualified technicians.
G Warning
Only carry out the following when the vehi-
cle is stationary:

Inserting a disc

Ejecting a disc
There is a risk of accident by being distract-
ed from road and traffic conditions if you
load a CD/DVD while the vehicle is in mo-
tion.
Automatic picture switch-off
Notes on storage media
Notes on the care of discs

77 Video
DVD video
From the control unit
Load DVD video (page 55).
COMAND loads the inserted medium
and starts playing it.
or
Press the function button y.
i Pressing the function button switches di-
rectly to the disc mode selected last (CD audio,
DVD audio, MP3 CD or DVD video). COMAND
then accesses all discs in the DVD changer.
If necessary select “Changer” and in
the media list select (
page 78) a DVD
video I.
From the COMAND controller
Select “Video” in the main function
menu.
To display: Slide qmr.
To hide: Slide qmr.
or
Wait apprx. eight seconds.
Control menu displayed
1Disc type
2Current track
3Current scene
4Elapsed track time
5Displays menu system
To display: Press n.
To hide: Slide qm and select “Full
Screen”.
Menu system displayed
1DVD-Video menu
2Pause function
3Stop function
4Media selection
5Sound settings
Switching to DVD videoDisplaying/hiding control menuDisplaying/hiding menu system

78 Video
DVD video
Slide and hold omp until the desired
point is reached.
or
Press and hold G or H on the
control unit until the desired point is
reached.
The control menu will appear.
In DVD video mode, if necessary dis-
play the menu system (
page 77).
Select “Changer”.
The media list appears. The dotRindi-
cates the medium currently playing.
Media list
1Symbol for DVD video
2DVD Video currently playing
To select DVD video I: Rotate ymz
or slide qmr.
Press n.
COMAND switches the medium.
i If you select a CD-/DVD-audio or MP3 me-
dium, the system switches to the corresponding
audio mode (
page 60).
Further information on the media list can be
found on (
page 62).
In DVD video mode, if necessary dis-
play the menu system (
page 77).
To interrupt playback: Select h.
The g display changes to T.
To resume playback: Select T.
Playback will then continue at the point
at which it was interrupted. The menu
system is hidden.
To stop playback: Press h again
when playback is stopped.
or
Select h twice in immediate succes-
sion during playback.
The option selector remains at T.
To restart playback: Select T.
Playback will start from the beginning.
The menu system is hidden.
Fast forward/reverse
Selecting DVD media
Stop function

102 Telephone
Making calls
To select call: Rotate ymz or slide
qmr.
To initiate call: Press n.
Initiating a call to a call list entry or
COMAND phone book entry
Open the call list and select an entry
(
page 97).
or
Open the COMAND phone book and
select an entry (
page 104).
To initiate call: Press n.Phone mode with a single call
1Other party
2Symbol for active phone connection
3Switches the hands-free microphone
off or on
4Sends DTMF tones (not possible with
all mobile phones)
5Device name of the connected mobile
phone
6Terminates callSwitching hands-free microphone on or
off
Open the phone main menu
(
page 92).
To switch off: Select “Mic Off”.
When the microphone is switched off
the symbol > appears in the main ar-
ea.
To switch on: Select “Mic On”.
The symbol > disappears
Sending DTMF tones
i This function is not possible with all mobile
phones.
Answering machines or other devices can
be controlled via DTMF tones, e. g. for re-
mote query functions.
To transmit individual characters:
During a call select the required char-
acters using the COMAND controller.
or
Press the corresponding button on the
COMAND control unit keypad.
Every selected character is transmitted
immediately.
Functions during a single call

103 Telephone
Making calls
Transmitting phone book entry as a
sequence of characters: Select
“Name”.
Select the desired phone book entry.
The entry is transmitted immediately as
a sequence of characters.
To switch back to call display: Select
“Back”.
Ending an active call
Switch display to phone mode if neces-
sary (
page 92).
To terminate call: Select 4.
or
Press W on the COMAND control unit
or thet button on the multifunc-
tion steering wheel.
Call waiting
i The call waiting function must be supported
and activated by the phone provider.
If you are conducting a single call and you
receive another, the second call number is
entered into the received calls list and a
signal tone will sound.
You can accept the waiting call with the
mobile phone. The previous call is put on
hold. You then have two calls, the accept-
ed call is the active call.

108 Telephone
Address book
Details screen for private data
1Back to the previous menu
2Selected data field
3k symbol for private data
4Calls up options
5l symbol for business data
Selecting another data field
Rotate ymz or slide qmr.
Displaying abbreviated content in full
Select “Options” K “Details”.
The complete display appears.
To close complete display: Slide
omp or press n.
Closing details screen
Select “Back”.
Changing an address book entry
Search for an address book entry
(
page 106).
Select “Options” K “Change Entry”.
or
Display details for an address book en-
try.
Select “Options” K “Change Entry”.
The input menu with the data fields ap-
pears.
Continue from the step “Switching data
field” in the “Creating a new address
book entry” section (
page 105).
Changing category of a
phone number data field
Display the details for an entry and
highlight the phone number data field
(
page 107).
Select “Options” K “Change Catego-
ry”.
Select a number category, e. g.
“Home”.
Select a phone category, e. g.
“Mobile Phone”.
If necessary select “Preferred”.
Depending on the previous status, the
option will be switched on D or off C.
The phone number is displayed in the
phone book as the first number and
can be dialed immediately.
Select “Save”.
The new category is saved.
Changing entry