Setting MERCEDES-BENZ C-Class 2008 W204 Comand Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2008, Model line: C-Class, Model: MERCEDES-BENZ C-Class 2008 W204Pages: 225, PDF Size: 3.26 MB
Page 38 of 225
37 At a glance
Basic functions of COMAND
To save setting: Press n.
The setting is stored and the menu is
exited.
To exit menu without changes: Press
the Back button
í.
Your vehicle is equipped with the harman/
kardon LOGIC7
® Surround Sound system.
You can select between “
LOGIC7®On” and
“
LOGIC7®Off”.
harman/kardon LOGIC7
® Surround Sound
is available for the following operating
modes:
Radio (FM only)
SatRadio*
CD audio
DVD audio (MLP, DTS, PCM and Dolby
Digital audio formats)
MP3 (including PCMCIA memory card)
Aux
DVD video (PCM, DTS and Dolby Digital
audio formats)
i As some DVDs contain both stereo and also
multi-channel audio formats, it may be neces-
sary to set the audio format (
page 66).
i The “LOGIC7®On” function of the harman/
kardon LOGIC7® Surround Sound system per-
mits the playback of discrete 5.1 and stereo re-
cordings with an optimal surround sound
platform for each passenger. Music and films on
CD or audio and video DVDs with high-resolution
surround formats, such as MLP, DTS or Dolby
Digital, are played with optimum sound.
The LOGIC7
® distributes the 5.1 surround infor-
mation over the 12-channel system architecture
to provide the optimum sound in all seats. This
produces the sound characteristics as intended
by the sound engineer during the original record-
ing.
harman/kardon LOGIC7
® converts all two-chan-
nel stereo sound sources into multi-channel sur-
round sound. The surround information stored
during the original recording is read out using
LOGIC7
® and likewise distributed over the
12 channels. No effects are created during the
process, anything that was always on the record-
ing is just made audible again.
Moreover, harman/kardon LOGIC7
® draws the
audible sound source away from the individual
loudspeakers, thus creating a natural 360°
sound platform for each passenger.
i By selecting “LOGIC7® Off”, the playback
of all playable formats is performed as on the ex-
isting medium. Due to the spatial conditions in
the vehicle, optimal sound is not possible in all
seats.
i Discs supporting the above-mentioned au-
dio formats display the following logos
Dolby Digital
DTS
MLP
Surround sound
Page 39 of 225
38
Setting the surround sound
For surround sound, you can select be-
tween “
LOGIC7®On” and “LOGIC7®Off”.
Select “Sound” K “Surround”.
To select the setting: Rotate ymz or
slide
qmr.
To save setting: Press n.
The setting is stored and the menu is
exited.
To exit menu without changes: Press
the
í button or slide omp.
i Please note the following:
For an optimal sound in all seats, balance
and fader should be set to the centre of the
passenger compartment with LOGIC7
®
switched on.
The best sound results are achieved when
playing high-quality audio and video DVD
discs.
For MP3 tracks, the bit rate should be at
least 128 kbps.
Surround playback does not function with
mono signal sources such as the medium
wave range in radio mode.
In the case of poor radio reception quality,
e.g. in tunnels, LOGIC7® should be switched
off, as otherwise a dynamic switchover from
stereo to mono and thus temporary sound
characteristic shifts can occur.
With certain stereo recordings, the sound
characteristic may deviate from convention-
al stereo playback.
Page 41 of 225
40 Audio
Radio
i Information on the COMAND control system
and how to operate it can be found on
(
page 14) and (page 31).
i For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. the (, &, $ or % but-
tons, for selecting a station or a menu or scroll-
ing through lists (
page 23).
From the COMAND control unit
Press the X function button.
i Press the button repeatedly to switch wave-
band in the sequence FM, AM, WB (
page 42)
and SatRadio* mode (
page 45). Pressing
again will switch back to FM radio mode.
From the COMAND controller
From another main function
Select “Audio” K “Audio” K “FM / AM
Radio” in the display.
i If radio mode was active last, you only need
to select “Audio”.
Within the audio function
Select “Audio” K “FM / AM Radio”.The radio display appears. The last se-
lected station in the last selected wave-
band is heard.
Display with Audio menu
1Main function line
2Audio menu
3Current audio mode
i You can switch to the various audio modes
in the audio menu:
FM / AM radio mode
SatRadio* mode (page 45)
CD-/DVD audio/MP3 mode (“Disc” and
“Memory Card” are described together in
this guide), (
page 60)
Music Register (page 67)
Aux mode (page 71)Radio display
1Display/selection window with station
or frequency
2Memory preset number
3Name or frequency of selected station
4Sound settings
5WB (Weather band)
6AM radio
7FM radio
8Stored station list
9Radio functions
Radio
Switching to the radio
Page 45 of 225
44 Audio
Radio
Slide mr to highlight the submenu.
To select the weather band:
Rotate ymz or slide omp until “WB” is
highlighted.
Press n.
1Display selection window
2Currently received channel
3Sound settings
4Weather band
5AM radio
6FM radio
7Channel list
Searching a channel
Rotate ymz or slide omp if the dis-
play/selection window is highlighted.
or
Press G or H on the control unit.
The search proceeds upwards or down-
wards and stops at the next receivable
channel.
Selecting a channel from channel list
Slide mr to highlight the submenu.
To call up the channel list:
Rotate ymz or slide omp until
“Channel” is highlighted.
Press n.
The channel list appears.
To select a channel: Rotate ymz or
slide qmr.
To tune to the selected channel:
Press n.
or
Press a number key, e.g. 4, on the
control unit at any time.
Switching to weather band
Page 48 of 225
47 Audio
Satellite radio*
i For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. the (, &, $ or % but-
tons, for selecting a channel or a menu or scroll-
ing through lists (
page 23).
Switching on
See “Subscribing to satellite radio” for im-
portant subscription information
(
page 46).
From another main function
Select “Audio” K “Audio” K
“SatRadio”.
i If radio mode was active last, you only need
to select “Audio”.
Within the audio function
Select “Audio” K “SatRadio”.
i No Satellite receiver:
The message “No Satellite Radio”
will appear in
a window.
The message will appear at start up or
when the signal is not available.
After the COMAND acquires the signal, the
Satellite radio display will appear. The sta-
tion last tuned to will begin to play.Satellite radio main menu
1SatRadio main display
2Channel name
3Memory preset number
4Selected category/channel number
5Channel info (short)
6Sound settings
7Category list
8Channel info (detailed)
9Preset channel list
aSatRadio menu
i You can display 5 in full:
Channel info (page 50)
Satellite radio operation
Page 52 of 225
51 Audio
Satellite radio*
Displaying service information
You can call the provider service center for
questions or releases whenever you need.
Select “SatRadio” K “Service” in the
SatRadio submenu.
The service information appears.
1Phone number of the provider,
(SIRIUS) or “Call Service Provider”
2SIRIUS ID of your satellite receiver
Slide omp to switch back to the SatRa-
dio main display.
Channel list updates
While receiving a new channel list the mes-
sage “Updating Channels” will appear.
The channel last tuned will be muted until
the update is completed. You cannot oper-
ate the satellite radio.
After completion of the update, the
Satellite radio main menu will appear.
The channel last tuned to will begin to play.Sound settings
Refer to chapter “At a glance” on how to
adjust sound settings.
Volume (page 35)
Balance control and fader (page 36)
Bass and treble control (page 36)
Surround sound (page 38)
Page 61 of 225
60 Audio
CD audio/DVD audio and MP3
From the control unit
Load CD/DVD (page 54) or PCMCIA-
memory card (
page 57).
COMAND loads the inserted medium
and begins playback.
or
Press the y function button.
i Pressing the function button switches di-
rectly to the disc mode selected last (CD audio,
DVD audio, MP3-CD or DVD video). COMAND
then accesses all discs in the DVD changer, the
memory card or the Music Register.
If necessary, select CD/DVD audio/
MP3 media (
page 62).
or
When playing a DVD video: Open the
media list as described under “Select-
ing DVD media” (
page 78).
Select an audio storage medium.
This switches to the required disc
mode.
From the COMAND controller
From another main function
Select “Audio” K “Audio” K “Disc” or
“Memory Card” or “Music Register” in
the Audio menu (
page 40).
i If the required mode was active last, you
only need to select “Audio”.
Within the audio function
Select “Audio” K “Disc” or “Memory
Card” or “Music Register” in the Audio
menu.
i “Disc” accesses audio discs in the DVD
changer, “Memory Card” selects the PCMCIA
memory card, “Music Register” selects the Mu-
sic Register.
If necessary, select CD/DVD audio/
MP3 media (
page 62).
This switches to the required disc
mode.
Example of CD audio mode display
1Disc type J
2Track number
3Track name (only if stored on disc as
CD text)
4Elapsed track time
5Visual track and time display
6Current playback option
7Sound settings
8Media selection
9Disc name (only if stored on disc as CD
text)
aCalls up track list
bStorage medium position in the media
list
cRecord function (ripping), (
page 68)
dPlayback options
Switching to CD audio, DVD audio or
MP3
Page 62 of 225
61 Audio
CD audio/DVD audio and MP3
Example of DVD audio display
1Disc type K
2Track number
3Track name (only if stored on disc)
4Elapsed track time
5Visual time and track display
6Current playback option
7Sound settings
8Media selection
9Disc name (only if stored on disc)
aCalls up track list
bStop function
cPause function
dStorage medium position in the media
list
ePlayback optionsExample of MP3 display
1Disc type L or M
2Track number
3Track name
4Elapsed track time
5Visual time and track display
6Current playback option
7Sound settings
8Media selection
9Current folder
aCalls up folder list
bStorage medium position in the media
list
cPlayback options
i An example of a media list display can be
found on (
page 62).
i The function is only available in DVD audio
mode.
Switch to DVD audio mode.
To interrupt playback: Select h.
The g display changes to T.
To resume playback: Select T.
Playback will then continue at the point
at which it was interrupted.
To stop playback: Press h again
when playback is stopped.
or
Select h twice in immediate succes-
sion during playback.
The option selector remains at T.
To restart playback: Select T.
Playback starts from the beginning of
the DVD.
Stop function
Page 67 of 225
66 Audio
CD audio/DVD audio and MP3
It is only possible to set the audio format in
DVD audio mode. The number of available
audio formats is dependent on the DVD.
The content of an audio DVD is called the
‘album’, which can be divided into a maxi-
mum of nine groups. A group may contain,
for example, music of different sound qual-
ities (stereo and multi-channel formats) or
bonus tracks. Each group can include up to
99 tracks. If a DVD audio only comprises
one audio format, the “Group” menu
item(s) cannot be selected.
Switch to DVD audio mode
(
page 60).
Select “DVD-A” K “Group”.
The list of available audio formats ap-
pears. A dotRindicates the format
currently selected.
To change setting: Rotate ymz or
slide qmr.
Press n.
To exit menu: Slide omp.The following options are available:
“Normal Track Sequence”
You will hear the tracks in the normal
sequence (e. g. track 1, 2, 3 etc.).
“Random Tracks”
You will hear the tracks in random or-
der (e. g. track 3, 8, 5 etc.).
“Folder” (only in MP3 mode)
The tracks in the currently active folder
and any subfolders are heard in ran-
dom order.
To select an option: Switch to CD au-
dio, DVD audio or MP3 mode
(
page 60).
Select “CD” or “DVD-A” or “MP3”.
The Options list appears. A dotRindi-
cates the activated option.
Select an option.
The option is activated. A correspond-
ing display will appear in the display/
selection window for all options except
“Normal Track Sequence”.
i The option “Normal Track Sequence” is au-
tomatically activated if you change the medium
which is currently being played or if you select
another medium. An activated option remains
active after COMAND is switched on or off.
Setting audio formatPlayback options
Page 68 of 225
67 Audio
Music Register
You can record tracks from audio CDs and
store them as MP3 files in the Music Reg-
ister. The memory capacity is 4 GB.
! Keep your original music files in a safe
place. A fault with the COMAND may cause the
music files stored in the Music Register to be
lost. Mercedes-Benz USA, LLC is not liable for
any loss of data.
From another main function
Select “Audio” K “Audio” K “Music
Register” in the display with Audio
menu (
page 40).
i If “Music Register” was active last, you only
need to select “Audio”.
Within the audio function
Select “Audio” K “Music Register”.
The Music Register is loaded. The Mu-
sic Register display appears.
No music files available:
A message will be displayed.
First record music files to the Music
Register (
page 68).
Music files available:
You will hear the first track of the first
folder found or playback will start from
the point listened to last.
Example display: Music Register
1Storage media type - Music Register
N
2Track number
3Track name
4Elapsed track time
5Visual time and track display
6Current playback option
7Sound settings
8Media selection
9Folder functions
aCurrent folder
bStorage medium position in the media
list
cCalls up Music Register menu
Music RegisterSwitching to Music Register