Set time MERCEDES-BENZ C-Class 2008 W204 Comand Manual

164 System settings
System settings

Press the function button Z.
or

Select “System” in the menu bar with
main functions.
Adjusting brightness

Select “System” K “System Settings”
K “Display” K “Brightness”.
1Brightness bar

To adjust brightness: Rotate ymz or
slide qmr.
The brightness bar moves up or down.

To confirm selection: Press n or
slide om.
System settings
Opening System menu
Menu overview
System settingsLanguage
Display
Time
Text reader speed
Voice control
Bluetooth
Reset (resets
COMAND to
factory settings)
i Use this function
to delete your person-
al data, e.g. before
selling your vehicle.
Setting language
Display settings

165 System settings
System settings
Setting the display design

Select “System” K “System Settings”
K “Display”.

Select “Day Mode” or “Night Mode” or
“Automatic”.
The dotRin front of the list entry indi-
cates the current selection.
i In the “Automatic” setting, COMAND evalu-
ates the automatic vehicle light sensor and auto-
matically switches over the display design.
Setting the time
i The correct time is essential for the follow-
ing system functions to operate correctly:
Route guidance on routes with time-depen-
dent traffic routing
Calculation of estimated time of arrival
Time stamps for calls received and calls di-
aled

Select “System” K “System Settings”
K “Time” K “Set Time”.1Sets the time
2Current date

To set value: Rotate ymz or slide
qmr.

To save setting: Press n.
i The increment for setting the minutes de-
pends on the situation. It is 30 minutes if the ve-
hicle is equipped with a navigation system and if
GPS signals are being received. It is one minute
if GPS reception is not available.
i If you change the time in 30 minute steps,
previously selected settings for time zone and
switching between summer time and standard
time are lost (
page 166).
Setting time/date format

Select “System” K “System Settings”
K “Time” K “Format”.
The format list appears. The dotsRin
front of the list entries indicate the cur-
rent setting.
i The abbreviations mean:
Date format: DD - Day, MM - Month,
YY/YYYY - Year
Time format: HH - Hour, MM - Minute for
24-hour and AM/PM format

To change format setting: Rotate
ymz or slide qmr.

To confirm selection: Press n.

To save setting and quit menu:
Slide omp.
Time settings

166 System settings
System settings
Setting time zone and switching be-
tween daylight saving time and stan-
dard time
i The correct time zone and daylight saving/
standard time settings are essential for the fol-
lowing system functions to operate correctly:
Route guidance on routes with time-depen-
dent traffic routing
Calculation of estimated time of arrival
Time stamps for calls received and calls di-
aled

To set time zone: Select “System” K
“System Settings”
K “Time” K “Time
Zone”.
A time zone list appears.

Rotate ymz or slide qmr to select the
appropriate time zone.

To switch between Daylight Saving
and standard time: Select “Daylight
Saving Time” (Summer) or “Standard Ti-
me” (Winter).
The dotRin front of a list entry indi-
cates the current setting.

To save setting and exit menu:
Slide omp.
Setting reading speed
You can use this feature to adjust the read-
out speed of the address book via voice
control.

Select “System” K “System Settings”
K “Text Reader Speed”.
The list of possible speeds appears.
The dotRin front of the list entry indi-
cates the current setting.

Select the desired speed.
The new setting is stored.
Read-out settings

169 System settings
System settings
General information on Bluetooth®
Bluetooth® is a technology for wireless
data communication over short distances
of up to approx. 30 feet. Using Bluetooth
®
you can exchange business cards (vCards),
for example.
Switching Bluetooth® on/off

Select “System” K “System Settings”
K “Bluetooth” K “Activate Bluetooth”.
This switches Bluetooth
® on D or
off C.
Connecting Bluetooth® devices
i In order to connect Bluetooth® devices,
Bluetooth® must be activated on the COMAND
and on the particular device. In addition, a Blue-
tooth
® device must be ‘visible’ for COMAND, so
that COMAND can find it and display it. The pro-
cedure for performing this setting is given in the
manual for the Bluetooth
® device.
The following types of devices can be con-
nected to COMAND via Bluetooth®:
Mobile phone
Portable personal computer
Laptop/PDA
You can connect a maximum of 10 devices
to COMAND.
The connection process includes search-
ing for a device and then authorizing it.
Opening the Bluetooth
® device list and
searching for a device

To open the list: Select “System” K
“System Settings”
K “Bluetooth” K
“Bluetooth Device List”.

To start search: Select “Update”.
COMAND starts searching for devices
in the reception range. After a short
time, the device list appears.
i If you open the device list again, the list of
authorized devices appears.

To cancel search: Select “Cancel”.
The device list may contain the following
devices:
All (available) devices found, regardless
of whether they have been authorized
or not.
All authorized devices, regardless of
whether they have been found (are
available) or not.When first entering the device list and be-
fore running an update, the black
dotRindicates the active phone (found
and authorized).
After running an update:
Phone icons 3 indicate if a phone is found
(black) or not (grey).
The check marks 1 indicate if a phone
has been authorized (black) or not (grey).
If a phone is not in the vehicle but has been
authorized previously, the phone symbol
and the check mark are grey 2.
Bluetooth® settings


170 System settings
System settings
i If the device list already contains ten autho-
rized devices, you will have to withdraw the au-
thorization for (de-authorize) one of the
authorized devices. You will then have to switch
this device off and start the search again. Other-
wise the new device you are looking for will not
appear in the list.
i If you reopen the device list at a later time,
this will contain all previously authorized devic-
es.
Displaying details on a Bluetooth®
device

Open the Bluetooth® device list
(
page 169).

Select the desired device.

Select “Options” K “Details”.
The details screen for the device is dis-
played.

To close details screen: Rotate ymz
or slide qmr.
Authorizing a Bluetooth® device

Open the Bluetooth® device list
(
page 169).

Select “Update”.
i If the authorization of a device, which had
been authorized in the past, has been withdrawn
and it is no longer found in the search, the device
list no longer includes this device.
Devices that have been authorized in the past
but not found in the search are either not
switched on or are not in the vehicle.

Select the as yet unauthorized device
(no check mark yet).

Select “Options” K “Authorize”.
The input menu for the passcode ap-
pears.
i The passcode is any number with between
one and sixteen digits that you can select your-
self. You must enter the same number on CO-
MAND and on the device to be authorized.
Please also refer to the instructions in the mobile
phone’s manual.

To enter passcode on COMAND:
Select digits one after another.

To cancel entry on COMAND: Select
“Back”.

To confirm entry on COMAND: Select
B:

Enter the same passcode on the Blue-
tooth® device (operating manual for
the relevant device).
The device is authorized.
De-authorizing a Bluetooth® device

Open the Bluetooth® device list
(
page 169).

Select the authorized device.

Select “Options” K “De-Authorize”.
You will be asked whether the device
should really be de-authorized.

Select “Yes” or “No”.
After selecting “Yes”, the authorization
of the device is withdrawn.

189 Voice Control
Navigation
“Find address”
You can use the “Find address” command
to select a previously saved address and
start route guidance.
Example of dialog:
sFind address
tPlease say the name.
sSmith
uThe system shows a numbered list
of saved addresses in the display
tPlease select a line number.
sLine number 1 ...
tLine number 1 accepted.
tStarting route guidance
“Start route guidance”
You can use the “Start route guidance”
command to start route guidance once a
valid destination has been entered.
sStart route guidance
tStarting route guidance
“Route information”
You can use the “Route information” com-
mand to have the following information on
your currently planned route read out:

Distance to destination

Remaining driving time

Expected arrival time
“Guidance instructions on”
When you use the “Guidance instructions
on” command, voice control repeats the
last driving tip. If the driving tip output has
been switched off up to this point, it is now
switched on again.
“Guidance instruction off ”
You can use this command to switch off
the route guidance voice output.
“Cancel route guidance”
You can use this command to stop route
guidance.
Example of dialog:
sCancel route guidance
tAre you sure you want to cancel
route guidance?
sYes
tCancelling route guidance
Voice control cancels route guidance.
or
sNo
tContinuing route guidance.
The dialog with voice control is terminated.
Route guidance remains activated.
“Zoom in/out"
You can use these commands to zoom the
map display one step in or out.
“Zoom in/out completely”
You can use these commands to set the
map display directly to the smallest or larg-
est scale.

196 Voice Control
Radio and Satellite Radio*
Selecting the frequency (FM range)
You can select frequencies within the FM
range (87.5 to 108.0 MHz) directly. Voice
control also recognizes the words
“frequency”, “point” and “megahertz”.
Example of dialog:
sEighty seven point five megahertz
uVoice control sets the frequency.
Selecting the frequency (AM range)
You can select frequencies within the AM
range (530 to 1710 kHz) directly. Voice
control also recognizes the words
“frequency” and “kilohertz”.
Example of dialog:
sFive hundred and ten kilohertz
uVoice control sets the frequency.
“Save station”
Using the “Save station” command you can
give a voice tag to the station currently se-
lected. You can also use this command to
improve voice recognition for difficult
names or if you want to use a name of your
own. You could, for example, save a station
with the name “Favorite station”.When you have given the command, voice
control prompts up to three times to say
the station name. When repeating the sta-
tion name, make sure that you pronounce
it in exactly the same way as you did the
first time. Otherwise, the name cannot be
saved and voice control aborts the saving
procedure.
Example of dialog:
sSave station
tPlease say the station name
sFavorite station
tPlease repeat the station name.
sFavorite station
tThe station has been saved.
“Select station”
Using the “Select station” command, you
can select a saved station.
Example of dialog:
sSelect station
tPlease say the station name
sFavorite station
uVoice control sets the station
“Station Favorite station”
Using this command, you can select a
saved station.
Example of dialog:
sFavorite station
uVoice control sets the station
“Select category” (Satellite radio)
Using the “Select category” command, you
can select an available category.
Example of dialog:
sSelect category
tPlease say the category name
sNews
uVoice control sets the category
“Category News” (Satellite radio)
Use this command to select a satellite ra-
dio category.
Example of dialog:
sCategory news
uVoice control sets the category

220 Index
P
PAL
Explanation . . . . . . . . . . . . . . . . . . . 215
Passcode
Entering. . . . . . . . . . . . . . . . . . . . . . . 87
PCM
Explanation . . . . . . . . . . . . . . . . . . . 215
PCMCIA card
Ejecting . . . . . . . . . . . . . . . . . . . . . . . 58
PCMCIA memory card
Ejecting . . . . . . . . . . . . . . . . . . . . . . . 58
Loading . . . . . . . . . . . . . . . . . . . . . . . 57
Personal Identification Number
see PIN
Phone
Accepting/ending a call (COMAND) 101
Entering a phone number . . . . . . . . 101
Redial (COMAND) . . . . . . . . . . . . . . 101
Single call . . . . . . . . . . . . . . . . . . . . 102
PIN. . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Explanation . . . . . . . . . . . . . . . . . . . 215
POI category. . . . . . . . . . . . . . . . . . . 142
Provider
Explanation . . . . . . . . . . . . . . . . . . . 215R
Radio . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Menu overview . . . . . . . . . . . . . . . . . 41
Storing stations . . . . . . . . . . . . . . . . . 43
Switching wavebands . . . . . . . . . . . . 42
Tuning to a station . . . . . . . . . . . . . . 42
Tuning to a station (COMAND) . . . . . 42
RDS
Explanation . . . . . . . . . . . . . . . . . . . 215
Region code . . . . . . . . . . . . . . . . . . . . 75
Explanation . . . . . . . . . . . . . . . . . . . 215
Reset . . . . . . . . . . . . . . . . . . . . . . . . . 171
Route guidance. . . . . . . . . . . . . . . . . 148
Route mode. . . . . . . . . . . . . . . . . . . . 122
S
SatRadio* . . . . . . . . . . . . . . . . . . . . . . 45
Automatic tuning . . . . . . . . . . . . . . . . 48
Operation . . . . . . . . . . . . . . . . . . . . . 47
Program category . . . . . . . . . . . . . . . 48
Service information . . . . . . . . . . . . . . 51
Service provider . . . . . . . . . . . . . 46, 51
Station list updates . . . . . . . . . . . . . . 51
Storing channels . . . . . . . . . . . . . . . . 49
Subscribing . . . . . . . . . . . . . . . . . . . . 46
Scan rate
Explanation . . . . . . . . . . . . . . . . . . . 215Selecting
Satellite radio* channel. . . . . . . . . . . 50
Sound
Setting . . . . . . . . . . . . . . . . . . . . . . . . 36
Surround sound . . . . . . . . . . . . . . . . . 37
Stopover destination
Entering . . . . . . . . . . . . . . . . . . . . . . 138
Switching on
Satellite radio* operation . . . . . . . . . 47
System settings
Reset . . . . . . . . . . . . . . . . . . . . . . . . 171
T
Time
Setting . . . . . . . . . . . . . . . . . . . . . . . 165
Traffic lane recommendation . . . . . 150
U
UDF . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Explanation . . . . . . . . . . . . . . . . . . . 215
Updating
Gracenote
® music recognition
technology. . . . . . . . . . . . . . . . . . . . . 65
Map software . . . . . . . . . . . . . . . . . 115
V
vCard
Explanation . . . . . . . . . . . . . . . . . . . 215