Radio preset MERCEDES-BENZ C-Class 2008 W204 Comand Manual

40 Audio
Radio
i Information on the COMAND control system
and how to operate it can be found on
(

page 14) and (
page 31).
i For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. the (, &, $ or % but-
tons, for selecting a station or a menu or scroll-
ing through lists (

page 23).
From the COMAND control unit
Press the X function button.
i Press the button repeatedly to switch wave-
band in the sequence FM, AM, WB (

page 42)
and SatRadio* mode (

page 45). Pressing
again will switch back to FM radio mode.
From the COMAND controller
From another main function
Select “Audio” K “Audio” K “FM / AM
Radio” in the display.
i If radio mode was active last, you only need
to select “Audio”.
Within the audio function
Select “Audio” K “FM / AM Radio”.The radio display appears. The last se-
lected station in the last selected wave-
band is heard.
Display with Audio menu
1Main function line
2Audio menu
3Current audio mode
i You can switch to the various audio modes
in the audio menu:
FM / AM radio mode
SatRadio* mode (
page 45)
CD-/DVD audio/MP3 mode (“Disc” and
“Memory Card” are described together in
this guide), (

page 60)
Music Register (
page 67)
Aux mode (
page 71)Radio display
1Display/selection window with station
or frequency
2Memory preset number
3Name or frequency of selected station
4Sound settings
5WB (Weather band)
6AM radio
7FM radio
8Stored station list
9Radio functions
Radio
Switching to the radio

41 Audio
Radio
Submenu overview
Radio (FM and AM only)Presets (FM and AM only)Channel (WB only)Sound
Enter FrequencyAutostoreList of receivable channelsTreble
D Station information
(only FM)List of stored stationsBass
Balance/Fader
Surround sound

42 Audio
Radio
You can switch the radio between the FM,
AM, and WB wavebands.
Select “FM” 7, “AM” 6 or “WB” 5 in
the radio display.
The last selected station in the select-
ed waveband is heard.
i In the WB waveband, COMAND displays the
Channel name instead of the station names
and/or frequency.
or
Press the X function button on the
control unit repeatedly until the desired
band is selected.
i Press the button repeatedly to switch wave-
band in the sequence of FM, AM, WB and
SatRadio* mode (

page 47). Pressing again will
switch back to FM radio mode.
You can tune to a station via station search
or by manual frequency input.
Tuning to a station via station search
Rotate ymz or slide omp if the dis-
play/selection window is highlighted.
or
Press G or H on the COMAND
control unit.
The search proceeds upwards or down-
wards and stops at the next receivable
station.
Tuning to a station via manual
frequency input
Select “Radio” K “Enter Frequency” in
the radio display.
An input menu appears.
or
Press ß on the control unit.
To enter a frequency: Press number
buttons on the control unit.
i You can only select numbers that are cur-
rently permissible.
COMAND will tune to the frequency en-
tered.
i If in the FM or AM wavebands you enter a
frequency outside the frequency sub-range, CO-
MAND will select the next frequency down.
Tuning to a station via the station
memory
Select “Presets” in the radio display.
or
Press n if the display/selection win-
dow is highlighted.
The station memory appears. The
dotR in front of a preset indicates that
the currently tuned station is stored
there.
To select a station: Rotate ymz or
slide qmr.
To tune to a station: Press n.
or
Press a number key, e.g. 4, on the
control unit.
Switching wavebands Tuning to a station

43 Audio
Radio
There are 10 presets available for FM, AM
and SatRadio* wavebands.
Storing stations manually
Press n if the display/selection win-
dow is highlighted.
or
Select “Presets” in the radio display.
In both cases, the station memory will
appear. The dotRin front of a preset
indicates that the currently tuned sta-
tion is stored there.
Station memory
To store a station to a selected pre-
set: Press and hold n until a signal
tone sounds.
or
Press and hold a number key, e.g. 4,
until a signal tone sounds.
The station is stored.
Storing via Autostore
i The function automatically assigns receiv-
able stations to the presets, sorted according to
reception quality. The stations which were
stored in the station memory manually are over-
written.
Press n if the display/selection win-
dow is active.
Select “Autostore”.
or
Select “Presets” K “Autostore” in the
radio display.
COMAND searches for receivable sta-
tions. A corresponding message is dis-
played. The available stations are
automatically stored under the presets.
Cancelling Autostore procedure
Select “Cancel”.
WavebandsFrequency
AM (MF)530 - 1700 kHz
FM (VHF)87.7 - 107.9 MHz
WB (Weather Band)Weather channels
Storing stations

47 Audio
Satellite radio*
i For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. the (, &, $ or % but-
tons, for selecting a channel or a menu or scroll-
ing through lists (

page 23).
Switching on
See “Subscribing to satellite radio” for im-
portant subscription information
(

page 46).
From another main function
Select “Audio” K “Audio” K
“SatRadio”.
i If radio mode was active last, you only need
to select “Audio”.
Within the audio function
Select “Audio” K “SatRadio”.
i No Satellite receiver:
The message “No Satellite Radio”
will appear in
a window.
The message will appear at start up or
when the signal is not available.
After the COMAND acquires the signal, the
Satellite radio display will appear. The sta-
tion last tuned to will begin to play.Satellite radio main menu
1SatRadio main display
2Channel name
3Memory preset number
4Selected category/channel number
5Channel info (short)
6Sound settings
7Category list
8Channel info (detailed)
9Preset channel list
aSatRadio menu
i You can display 5 in full:
Channel info (
page 50)
Satellite radio operation

48 Audio
Satellite radio*
Changing the category
Satellite radio stations are split up into cat-
egories. You can select between various
categories such as News/Talk, Sports and
Country, if available. The category list is
sorted alphabetically.
Selecting a category
To call up the category list:
Rotate ymz or slide omp until
“Category” is highlighted in the sub-
menu
Press n.
The category list appears.
To select a category:
Rotate ymz or slide qmr.
To set the selected category:
Press n.
The selected category will appear in
the display. The channel last tuned to in
the new category will begin to play.
At the beginning of the category list the
category “All Channels” will appear.
This category is sorted numerically (by
channel numbers) and allows you to
scroll through all available channels.
Selecting a channel
You can use the following functions:
Channel search
Channel selection via direct entry
(

page 48)
Selecting a channel from the SatRadio
channel list (

page 49)
Selection from the preset menu
(

page 50)
Channel search
Rotate ymz or slide omp if the SatRa-
dio main display is highlighted.
or
Press G or H on the control unit.
The search proceeds upwards or down-
wards and stops at the next channel in
the selected category.SatRadio menu
On the submenu bar rotate ymz or
slide omp until “SatRadio” is highlight-
ed.
Press n.
The SatRadio menu appears.
Entering a channel number directly
Select “SatRadio” K “Enter Channel”
in the SatRadio menu.
An input dialog appears.
or

49 Audio
Satellite radio*
Press ß on the control unit.
To enter a channel: Press correspond-
ing number buttons on the control unit.
i You can only select numbers that are cur-
rently permissible.
COMAND will tune to the channel en-
tered.
Selecting a channel from the SatRadio
channel list
Select “SatRadio” K “Channel List” in
the SatRadio menu.
The channel list appears.
To select a channel: Rotate ymz or
slide qmr.
To tune to the selected channel:
Press n.
Memory functions
i There are 10 presets available.
You can use the following functions:
Saving channels manually
Selecting a channel from the Satellite
preset memory (

page 50)
Storing channels manually
Press n if the display/selection win-
dow is highlighted.
or
Select “Presets” on the SatRadio sub-
menu bar.
In both cases, the channel memory will
appear. The dotRin front of a preset
indicates that the currently tuned chan-
nel is stored there.
Station memory
To select a preset: Rotate ymz or
slide qmr.
To store a channel to a selected pre-
set: Press and hold n until a signal
tone sounds.
or
Press and hold a number key, e.g. 4,
until a signal tone sounds.
The channel is stored.

50 Audio
Satellite radio*
Storing via Autostore
i The function automatically assigns receiv-
able channels to the presets. The channels
which were stored in the channel memory man-
ually will be overwritten in this process.
Press n if the display/selection win-
dow is active.
Select “Autostore”.
or
Select “Presets” K “Autostore” from
the SatRadio submenu.
COMAND searches for receivable
channels. A corresponding message is
displayed. The available channels are
automatically stored under the presets.
Cancelling storage procedure
Select “Cancel”.Selecting a channel from the memory
list
To call up the channel list:
In the submenu rotate ymz or slide
omp until “Presets” is highlighted.
The presets list appears.
To select a channel: Rotate ymz or
slide qmr.
To tune to the selected channel:
Press n.
or
Press a number key, e.g. 4, on the
control unit.
Displaying information
In the submenu rotate ymz or slide
omp until “Info” is highlighted.
Press n.
Information about the current program
appears.1Category
2Channel
3Artist
4Song title
You will see (if available)
the full name
additional information
Switching back to the SatRadio main dis-
play:
Slide omp.