tow MERCEDES-BENZ C-CLASS CABRIOLET 2018 Owner's Manual

Children in particular could acciden
tally
press the electrical seat adjustment buttons
and become trapped. 0007
While moving the seats, make sure that
hands or other body parts do not get
under the le ver assembly of the seat
adjustment sy stem. 000A
WARNING Risk of inju rydue tohead
re stra ints which are not fitted or are
adjus ted incor rectly
If head restra ints are not fitted or are adjus‐
te d incor rectl y,they cannot pr ovide pr otec‐
tion as intended.
There is an increased risk of injury in the
head and neck area, e.g. in theeve nt of an
accident or when braking. 0007
Alw ays drive with the head restra ints
fi tted. 0007
Before driving off, ma kesure forev ery
ve hicle occupant that the cent reofthe
head restra int supports the back of the
head at about eye le vel. Do not inter
change the head restra ints of the
front and rear seats. Otherwise, you will not be
able toadjust the height and angle of the head
re stra ints cor rectl y.
Ad just the head restra int fore -and-aft position so
th at it is as close as possible tothe back of your
head. 000A
WARNING Risk of inju ryor death due to
incor rect seat position
The seat belt does not of ferth e intended
le ve l of pr otection if you ha venot mo vedthe
seat backrest toan almost vertical position.
When braking or in theeve nt of an accident,
yo u could slide underneath the seat belt and
sus tain abdominal or neck injuries, forex am‐
ple. 0007
Adjust the seat proper lybefore begin‐
ning your journe y. 0007
Alw ays ensure that the seat backrest is
in an almost vertical position and that
th e shoulder section of your seat belt is
ro uted across the cent reofyour shoul‐
der. 000E
NO
TEDama getothe seats when moving
th e seats back The seats may be damaged
byobjects when
moving the seats bac k. 0007
When moving the seats bac k,make
sure that there are no objects in the
fo ot we ll, under or behind the seats. 102
Seats and stowing

1
Seat ba ckrest inclination
2 Seat height
3 Seat fore -and-aft position 0007
Toadjust the seat fore -and-aft position:
lift le ver3 and slide the seat into the
desired position. 0007
Make sure that the seat is engaged. Ad
justing the front seat manually and elec‐
trically (with Seat Comfort Package) 1
Seat backrest inclination
2 Seat height
3 Seat cushion inclination
4 Seat fore -and-aft position
5 Seat cushion length 0007
Toadjust the seat fore -and-aft position:
lift le ver4 and slide the seat into the
desired position. 0007
Make sure that the seat is engaged. 0007
Toadjust the seat cushion length: lift lever
5 and slide the front section of the seat
cushion forw ards or backwards. Seats and
stowing 103

Ad
justing the front seat electrically 1
Head restra int height
2 Seat backrest inclination
3 Seat height
4 Seat cushion length
5 Seat cushion inclination
6 Seat fore -and-aft position 0007
Save the settings with the memory function
(0013 page113). Ad
justing the 4-w aylumbar support 1
Raise
2 Soften
3 Lower
4 Harden 0007
Using buttons 1to4 , adjust the conto ur
of the backrest individually tosuit your bac k. Head
restra ints Ad
justing the front seat head restra ints
mechanically 000A
WARNING Risk of inju rythro ugh adjust‐
ing vehicle settings while theve hicle is in
motion
Yo u could lose cont rol of theve hicle in the
fo llowing situations:
R ifyo u adjust the driver's seat, the head
re stra ints, thesteering wheel or the mir‐
ro r while theve hicle is in motion
R ifyo ufast enyour seat belt while theve hi‐
cle is in motion 0007
Before starting the engine: adjust the
driver's seat, the head restra ints, the
st eering wheel or the mir ror and fasten
yo ur seat belt. 104
Seats and stowing

000A
WARNING Risk of inju rydue tohead
re stra ints which are not fitted or are
adjus ted inco rrectly
If head restra ints are not fitted or are adjus‐
te d incor rectl y,they cannot pr ovide pr otec‐
tion as intended.
There is an increased risk of injury in the
head and neck area, e.g. in theeve nt of an
accident or when braking. 0007
Alw ays drive with the head restra ints
fi tted. 0007
Before driving off, ma kesure forev ery
ve hicle occupant that the cent reofthe
head restra int supports the back of the
head at about eye le vel. Do not inter
change the head restra ints of the
front and rear seats. Otherwise, you will not be
able toadjust the height and angle of the head
re stra ints cor rectl y.
Ad just the head restra int fore -and-aft position so
th at it is as close as possible tothe back of your
head. 0007
Toraise: pullthe head restra int up. 0007
Tolowe r:press release knob 1inthe direc‐
tion of the ar row and push the head restra int
down. 0007
Tomo veforw ards: pullthe head restra int
fo rw ards. 0007
Tomo vebackwards: press and hold the
re lease knob 2. 0007
Press the head restra int backwards and let
go of there lease knob 2.
Fi tting/ removing the rear seat head
re stra ints
Re mo val
The head restra ints can be remo ved only in vehi‐
cles with folding rear seat backrests. Seats and
stowing 105

0007
Release there ar seat backrest and fold it for‐
wa rds slightly (0013 page116). 0007
Pull the head restra int upwards as far as it
will go. 0007
Push release knob 1inthe direction of the
ar row and pull out the head restra int.
Fi tting 0007
Inse rtthe head restra int such that the
notches on the bar are on the left when
vie we d in the direction of tra vel. 0007
Push the head restra int down until it
engages. 0007
Foldthere ar seat backrest back until it
engages. Configuring
the seat settings Multimedia sy
stem:
0018 © 0019
Comfort 0019
Seat comfort 0007
Select a seat.
Ad justing the backrest side bols ters 0007
Select Side bolsters . 0007
Adjust the air cushions.
Ad justing the seat contour in the lumbar
re gion of the seat backrest (lumbar) 0007
Select Lumbar . 0007
Adjust the air cushions. Selecting
the massage prog ramme for the
front seats Multimedia sy
stem:
0018 Vehicle 0019
Seats 0007
Select Driver's seat orFront-passenger area. 0007
Select Massage. 0007
Select a massage programme.
The massage programme runs for appro x‐
ima tely 9to 15 minutes, depending on the
setting. 0007
Toset the massage intensity: switch High
intensity on0073 or off 0053. Re
setting seat adjustments Multimedia sy
stem:
0018 Vehicle 0019
a Seats 0019
Reset 0007
Select YesorNo.
Depending on whe ther the settings forth e driver
or front passenger seat are selected, only the
selected seat can be reset. Fo
lding the front seat backrest forw ards/
back (vehicles with memo ryfunction) Wi
th th e EASY -ENTRY function, the seat will
mo veforw ards if you ha vefolded the seat back‐
re st forw ards. This makes it easier for passen‐
ge rs to get into and out of there ar of theve hi‐
cle. 106
Seats and stowing

0007
Tofold forw ards: pullthe seat release han‐
dle 1and fold the seat backrest forw ards
as far as it will go.
The seat will mo veautomatically tothefo re‐
most position. 0007
Tofold back: swing back the seat backrest
horizon tally.
If th e seat backrest is not engaged, this will
be shown on the multifunction display of the instrument clus
ter.A wa rning tone will also
sound.
The seat will mo veautomatically tothe
st ored position.
If th e set seat position can no longer be reached,
e.g. because of luggage in there ar foot we ll or
af te r occupants ha veentered there ar of the
ve hicle: 0007
Pull the seat release handle 1again and
re turn the seat backrest toan upright posi‐
tion.
The seat will lock in the new fore -and-aft
position. Fo
lding the front seat backrest forw ards/
backwards (vehicles with out memory func‐
tion) Fo
lding forw ards
Wi th th e EASY -ENTRY function, the seat will
mo veforw ards if you ha vefolded the seat back‐
re st forw ards. This makes it easier for passen‐
ge rs to get into and out of there ar of theve hi‐
cle. 0007
If necessar y,release the head restra int and
push it down. 0007
Pull the seat release handle 1and fold the
seat backrest forw ards until the seat back‐
re st engages. 0007
Push the seat as farfo rw ards as it will go. Seats and
stowing 107

Fo
lding back 0007
Push the seat back horizon tally by the seat
backrest until it reaches the seat position
th at wa s pr eviously set. 0007
Foldthe seat backrest back until it engages.
Do so as smoo thly as possible.
If th e seat backrest is not engaged, this will
be shown on the multifunction display of the
instrument clus ter.A wa rning tone will also
sound. 0007
Afterth e seat backrest has been folded
bac k,check the position of the head restra int
and set it tothe cor rect position.
If th e set seat position can no longer be reached,
e.g. because of luggage in there ar foot we ll or
af te r occupants ha veentered there ar of the
ve hicle: 0007
Pull the seat release handle 1again and
re turn the seat backrest toan upright posi‐
tion.
The seat will lock in the new fore -and-aft
position. Switching the seat heating on/o
ff 000A
WARNING Risk of bu rns due torepeat‐
edly switching on the seat heater
Re peatedly switching on the seat heater can
cause the seat cushion and seat backrest
padding tobecome very hot.
The health of persons with limited temp era‐
ture sensitivity or a limited ability toreact to
high temp eratures may be af fected or they
may even su ffer burn-like injuries. 0007
Do not repeatedly switch on the seat
heater. To
protect against overheating, the seat heating
may be temp orarily deactivated af ter it is
switched on repeatedly.
000E NO
TEDama getothe seats caused by
objects or documents when the seat
heater is switched on When
the seat heater is switched on, over‐
heating can occur due toobjects or docu‐ ments placed on
the seats e.g. seat cushions
or child seats. This could cause damage to
th e seat sur face. 0007
Makesure that no objects or docu‐
ments are on the seats when the seat
heater is switched on. Re
quirements:
R the po wer supp lyis switched on 108
Seats and stowing

0007
Toswitch on/increase the le vel:press but‐
to n1 repeatedly until the desired heating
le ve l is set.
Depending on the heating le vel, up tothree
indicator lamps light up. 0007
Toswitch off/reduce the le vel:press but‐
to n1 repeatedly until the desired heating
le ve l is set.
If all indicator lamps are off, the seat heater
is switched off.
0009 The seat heater automatically switches down
from theth re e heating le vels af ter 8, 10and
20 minutes until the seat heater is switched
off. Setting
the panel heating Multimedia sy
stem:
0018 Vehicle 0019
î Vehicle settings
0019 Panel heating
When the seat heater is switched on, the armr‐
ests in theve hicle as well as the cent reconsole
can be hea ted using this function.
Setting options 0007
Select Front and rear, Front only,Rear only
or Off . Switching
the seat ventilation on/off Re
quirements:
R the po wer supp lyis switched on 0007
Toswitch on/increase the le vel:press but‐
to n1 repeatedly until the desired ventila‐
tion le vel is set.
Depending on theve ntilation le vel, up to
th re e indicator lamps light up. 0007
Toswitch off/reduce the le vel:press but‐
to n1 repeatedly until the desired ventila‐
tion le vel is set.
If all indicator lamps are off, the seat ventila‐
tion is switched off. Switching AIRSCARF on/o
ff 000A
WARNING Risk of bu rns caused bythe
heating output from AIRSCARF being too
high
When AIRSCARF is switched on, very hot air
can flow from the outlet opening in the head
re stra ints.
This could result in burns in the immediate
vicinity of the outlet opening. 0007
Turn the heating output down in good
time. Seats and
stowing 109

0007
Maintain a suitable dis tance from the
outlet opening. Re
quirements:
R the po wer supp lyis switched on AIRSCARF
warmsth e head and neck area of
ve hicle occupants with warm air. The warm air
fl ow s out of theve nts in the head restra ints. 0007
Toswitch on: press button 1.
All indicator lamps are on.
0009 During the switch-on process, the blo wer
st arts up on lyafte r a preheating phase last‐
ing se ven seconds. 0007
Toreduce the le vel:press button 1
re peatedly until the desired heating le vel is
set.
Depending on the heating le vel, up tothree
indicator lamps light up. 0007
Toswitch off: press button 1repeatedly
until all the indicator lamps go out.
0009 After switching off, the blo werru ns on for a
fe w seconds tocool down the heating ele‐
ments.
0009 Ifth eve hicle battery voltage is too lo w,AIR‐
SCARF may switch off. 0007
Adjusting the AIRSCARF vent
(0013 page 146).
Make sure that there are no objects co vering the
air intake on the back of the head restra int. Make sure
that objects do not enter theve nts in
th e head restra ints. St
eering wheel Ad
justing the steering wheel manually 000A
WARNING Risk of inju rythro ugh adjust‐
ing vehicle settings while theve hicle is in
motion
Yo u could lose cont rol of theve hicle in the
fo llowing situations:
R ifyo u adjust the driver's seat, the head
re stra ints, thesteering wheel or the mir‐
ro r while theve hicle is in motion
R ifyo ufast enyour seat belt while theve hi‐
cle is in motion 0007
Before starting the engine: adjust the
driver's seat, the head restra ints, the
st eering wheel or the mir ror and fasten
yo ur seat belt. 11 0
Seats and stowing

000A
WARNING Risk of entrapment forch il‐
dren when adjusting thesteering wheel
Children could injure themselves if they
adjust thesteering wheel. 0007
Never lea vechildren unat tended in the
ve hicle. 0007
When leaving theve hicle, alw aysta ke
th eke y with you and lock theve hicle.
This also applies tothe digital vehicle
ke y if the "Digital Vehicle Key" function
is activated via Mercedes me connect. 0007
Push release le ver1 down as far as it will
go.
The steering column is unloc ked. 0007
Adjust height 2and di stance 3tothe
st eering wheel. 0007
Push release le ver1 up as far as it will go.
The steering column is loc ked. 0007
Check and make sure that thesteering col‐
umn is loc kedby moving thesteering wheel. Ad
justing the steering wheel electrically The
steering wheel can be adjus ted when the
po we r supp lyis switched off. 1
Adjusts the dis tance tothesteering wheel
2 Adjusts the height 0007
Save the settings with the memory function
(0013 page113). Seats and
stowing 111