wiper fluid MERCEDES-BENZ C-Class COUPE 2014 CL204 Owner's Manual

Locking (SmartKey) .......................... 72
Lowering
........................................ 324
Maintenance .................................... 22
Parking for a long period ................ 150
Pulling away ................................... 134
Raising ........................................... 321
Reporting problems .........................25
Securing from rolling away ............321
Towing away .................................. 290
Transporting .................................. 292
Unlocking (in an emergency) ...........79
Unlocking (SmartKey) ......................72
Vehicle data ................................... 340
Vehicle data ....................................... 340
Vehicle dimensions ...........................340
Vehicle emergency locking ................79
Vehicle identification number see VIN
Vehicle identification plate ..............332
Vehicle tool kit .................................. 282
Video (DVD) ........................................ 195
VIN ...................................................... 332W
Warning and indicator lamps ABS ................................................ 234
Brakes ........................................... 234
Check Engine ................................. 240
Coolant .......................................... 241
Distance warning ........................... 243
DISTRONI CPLUS ........................... 243
ESP ®
.............................................. 236
ESP ®
OFF ....................................... 237
Fuel tank ........................................ 240
Overview .......................................... 30
PASSENGER AIRBAG OFF ................45
Reserve fuel ................................... 240
Seat bel t........................................ 232
SPORT handling mode ...................237
SRS ................................................ 239
Tire pressure monitor ....................244
Warranty ............................................ 332
Washer fluid Display message ............................ 230
Wheel bol ttightening torque ...........324
Wheel chock ...................................... 321Wheels
Changing awheel .......................... 320
Checking ........................................ 297
Cleaning ......................................... 275
Cleaning (warning) .........................320
Emergency spare wheel .................328
Important safety notes ..................296
Interchanging/changing ................320
Mounting anew wheel ................... 323
Mounting awheel .......................... 320
Removing awheel .......................... 323
Storing ........................................... 320
Tightening torque ........................... 324
Whee lsize/tir esize ....................... 324
Window curtain air bag
Display message ............................ 211
Operation ........................................ .44
Windows
see Side windows
Windshield
Defrosting ...................................... 125
Windshiel dwasher fluid
see Windshield washer system
Windshield washer system ..............273
Notes ............................................. 338
Windshiel dwipers
Problem (malfunction) ...................118
Replacing the wiper blades ............117
Switching on/off ........................... 116
Winte rdriving
Important safety note s.................. 298
Slippery road surfaces ...................155
Snow chains .................................. 299
Winter tires
M+S tires ....................................... 298
Wiper blades
Cleaning ......................................... 276
Important safety notes ..................117
Replacing ....................................... 117
Wooden trim (cleaning instructions) 278
Workshops see Qualified specialist workshop Z
ZONE function Switching on/off ........................... 125 Index
19

High-beam headlamps
X
To switch on the high-beam headlamps:
turn the SmartKey in the ignition lock to
position 2or start the engine.
X Turn the light switch to 000Bor0003.
X Press the combination switch beyond the
pressure point in the direction of
arrow 0002.
In the 0003position, the high-beam
headlamps are only switched on when it is
dark and the engine is running.
The 000A indicator lamp in the instrument
cluster lights up when the high-beam
headlamps are switched on.
X To switch off the high-beam
headlamps: move the combination switch
back to its normal position.
The 000A indicator lamp in the instrument
cluster goes out.
High-beam flasher X
To switch on: turn the SmartKey in the
ignitio nlock to position 1or 2or start the
engine.
X Pull the combination switch in the direction
of arrow 0022. Hazard warning lamps The hazard warning lamps automatically
switch on if:
R
an air bag is deployed.
R the vehicle is slowed down rapidly from a
speed of over 45 mph (70 km/h) and
comes to a halt.
X To switch on the hazard warning lamps:
press button 0002.
All turn signals flash. If you now switch on
a turn signal using the combination switch,
only the turn signal lamp on the
corresponding side of the vehicle will flash.
X To switch off the hazard warning
lamps: press button 0002.
If the vehicle returns to a speed of over
6m ph (10 km/h) after a full application of the
brakes, the hazard warning lamps are
deactivated automatically.
i The hazard warning lamps still operate if
the ignition is switched off. Headlamp cleaning system
The headlamps are cleaned automatically if
the "Wipe with washer fluid" function is
operated five times while the lights are on and
the engine is running (Y page 116). When you
switch off the ignition, the automatic
headlamp cleaning system is reset and
counting is resumed from 0. Cornering light function Exterior lighting
109Lights and windshield wipers Z

0002
Backup Light
0003 Brake lamp
0022 Parking lamp/brake lamp
X Press the respective bulb 0002,0003or0022 back
and turn it counter-clockwise to remove it
from the bulb holder.
X Inser tthe new bulb into the bulb holder and
turn it clockwise.
X Reinsert the connector for LED light
functions in the bulb holder.
X Insert the bulb holder again and lock it in
place.
X Insert the tail lamp connector.
X Close the side trim panel (Y page 115).Windshield wipers
Switching the windshield wipers on/
off
! Do not operate the windshield wipers
when the windshield is dry, as this could
damage the wiper blades. Moreover, dust
that has collected on the windshield can
scratch the glass if wiping takes place when
the windshield is dry.
! If the windshield wipers leave smears on
the windshield after the vehicle has been
washed in an automatic car wash, wax or
other residues may be the reason for this.
Cleant he windshield using washer fluid after washing the vehicle in an automatic
car wash.
Combination switch
0005
0008 Windshield wiper off
0006 0001 Intermittent wipe, low 3
0007 0002 Intermittent wipe, high 4
000B 0016 Continuous wipe, slow
000C 0010 Continuous wipe, fast
0020 0005 Single wipe/0006 To wipe the
windshield using washer fluid
X Switch on the ignition.
X Turn the combination switch to the
corresponding position.
! Intermittent wiping with rain sensor: due
to optical influences and the windshield
becoming dirty in dry weather conditions,
the windshield wipers may be activated
inadvertently. This could then damage the
windshield wiper blades or scratch the
windshield.
For this reason, you should always switch
off the windshield wipers in dry weather.
In the 0001or0002 position, the appropriate
wiping frequency is set automatically
according to the intensity of the rain. In
the 0002 position, the rain sensor is more
sensitive than in the 0001position, causing
the windshield wipers to wipe more
frequently.
If the wiper blades are worn, the windshield
will no longer be wiped properly. This could
3 Rain sensor set to low sensitivity.
4 Rain sensor set to high sensitivity. 116
Windshield wipersLights and windshield wipers

Problems with the windshield wipers
Problem Possible causes/consequences and
0001 Solutions
The windshield wipers
are jammed. Leaves or snow, for example, may be obstructing the windshield
wiper movement.T
he wiper motor has been deactivated.
X For safety reasons, you should remove the SmartKey from the
ignition lock.
or
X Switch off the engine using the Start/Stop button and open the
driver's door.
X Remove the cause of the obstruction.
X Switch the windshield wipers back on. The windshield wipers
fail completely. The windshield wiper drive is malfunctioning.
X
Select another wiper speed on the combination switch.
X Have the windshield wipers checked at a qualified specialist
workshop. The windshield washer
fluid from the spray
nozzles no longer hits
the center of the
windshield. The spray nozzles are misaligned.
X
Have the spray nozzles adjusted at a qualified specialist
workshop. 118
Windshield wipersLights and windshield wipers