light MERCEDES-BENZ C-CLASS COUPE 2018 Owner's Manual

to
n on theke y (with theke y in the vicinity of
th eve hicle). 0007
Vehicles with boot lid conve nience clos‐
ing feature: press boot lid remo teoperating
switch 1. 0007
Vehicles with boot lid conve nience clos‐
ing feature: press closing button 1onthe
boot lid. 0007
Vehicles with boot lid conve nience clos‐
ing and KEYLESS-GO: press locking button
2 onthe boot lid.
If a key is de tected outside theve hicle, the
boot lid will close and theve hicle will be
loc ked. Boot lid automatic
reve rsing function
If an object obstructs the boot lid during the
automatic closing process, the boot lid will open
again automaticall y.The automatic reve rsing
function is only an aid and is not a substitute for
yo ur attentiveness. 0007
When closing, make sure that no body parts
are in the closing area. 000A
WARNING Risk of becoming trapped
despi tereve rsing function
The reve rse function does not react:
R tosoft, light and thin objects, e.g. fingers
R over the last 8 mm of the closing path.
In these situations in particular, there ve rsing
function cannot pr event someone being trap‐
ped. 0007
When closing, make sure that no body
parts are in the closing area.
If someone is trapped:
R press the008B button on theke y,or 82
Opening and closing

The buttons on
the driver's door take prece‐
dence. 0007
Tostart automatic operation: pressthe
0062 button be yond the point of resis tance
or pull and release it. 0007
Tointer rupt automatic operation: press or
pull the0062 button again.
When theve hicle is switched off, the side win‐
do ws can continue being ope rated.
The function is available for around five minutes
or until a door is opened.
Au tomatic reve rsing function of the side win‐
do ws
If an object bloc ksa side wind owduring the
closing process, the side window opens again
automaticall y.The automatic reve rsing function
is only an aid and is not a substitute foryo ur
attentiveness. 0007
When closing, make sure that no body parts
are in the closing area. 000A
WARNING Risk of becoming trapped
despi tethere being reve rsing pr otection
on the side window
The reve rse function does not react:
R tosoft, light and thin objects, e.g. fingers
R during resetting
This means that there ve rse function cann ot
pr eve nt someone from becoming trapped in
th ese situations. 0007
When closing, make sure that no body
parts are in the closing area. 0007
If someone becomes trapped, press the
0062 button toopen the side window
again. Au
tomatic function of the side windo ws The front side windo
wsare closed automatically
when theve hicle is switched off:
R if it starts torain (de tection bythera in sen‐
sor on the windscreen)
R intheeve nt of extreme outside temp eratures R
afte r six hours
R ifth ere is a malfunction in the po wer supp ly
The front side windo wsare closed as far as the
ve ntilation position.
Ve hicles with a sliding sunroof: the front side
windo wsare closed comple tely if the sliding sun‐
ro of is open.
If th e side windo wsare bloc ked during auto‐
matic closing, the side window concerned will
open again slightl y.The automatic function is
th en deactivated. Con
venience opening (ventilating theve hicle
before starting a journey) 000A
WARNING Risk of entrapment when
opening a side window
When opening a side windo w,parts of the
body could be dr awn in or become trapped
between the side window and window frame. 0007
When opening, make sure that nobody
is touching the side windo w. 86
Opening and closing

Problem
Possible causes/consequences and 0050
0050Solutions
000A WARNING Risk of becoming trapped or fata lly injured if reve rsing pr otection is not activated
If yo u close a side wind owagain immediately af ter it has been bloc ked or reset, the side window closes
with increased or maximum forc e. The reve rsing feature is then not active.
Pa rts of the body could become trapped in the closing area in the process. 0007
Make sure that no parts of the body are in the closing area. 0007
Tostop the closing process, release the button or press the button again toreopen the side win‐
do w. If a side window is obstructed during closing and
reopens again slightly: 0007
Immediately af terth e window is bloc ked, pull the cor responding switch again until the side window has
closed, and hold the switch for an additional second.
The side window will be closed with increased forc e.
If a side window is obstructed again during closing and reopens again slightly: 0007
Repeat the pr evious step.
The side window is closed without the automatic reve rsing function.
The side windo wscannot be opened or
closed using the con venience opening
fe ature. The
key bat tery iswe ak or dischar ged. 0007
Check the battery using the battery indicator lamp and replace if necessary (0013 page73). 88
Opening and closing

000A
WARNING Risk of entrapment even wi th
th ere ve rsing feature active
The reve rse function does not react in partic‐
ular:
R tosoft, light and thin objects, e.g. fingers
R overth e last 4 mm of the closing path
R during resetting
This means that there ve rse function cann ot
pr eve nt someone from becoming trapped in
th ese situations. 0007
When closing, make sure that no body
parts are in the closing area. 0007
Release the button immediately if
somebody becomes trapped.
or 0007
Brief lypress the button in any direction
during automatic operation.
The closing process is stopped. Au
tomatic reve rsing function of thero ller
sunblind
If th ere is an object obstructing thero ller sun‐
blind during the closing process, thero ller sun‐
blind will open again automaticall y.The auto‐
matic reve rsing function is only an aid and is not
a substitute foryo ur attentiveness. 0007
When closing thero ller sunblind, make sure
th at no body parts are in thera nge of mo ve‐
ment. 000A
WARNING Risk of becoming trapped
despi tereve rsing function
In particular, there ve rsing function does not
re act tosoft, light and thin objects, e.g. fin‐
ge rs.
This means that there ve rsing function can‐
not pr event entrapment in these situations. 0007
When closing thero ller sunblind, make
sure that no body parts are in thera nge
of mo vement. 0007
Release the button immediately if
somebody becomes trapped. or
0007
Press the button in any direction during
th e automatic closing process.
The closing process is stopped. Au
tomatic functions of the sliding sun roof 0009
The term "sliding sun roof" also refers to the
panoramic sliding sunroof.
By pushing or pulling the0057 button, you can
inter rupt the automatic functions: "Rain closing
function when driving" and "Automatic lo wer‐
ing".
The sliding sunroof is auto maticallyclosed when
th eve hicle has been switched off:
R if it starts torain (de tection bythera in sen‐
sor on the windscreen)
R intheeve nt of extreme outside temp eratures
R afte r six hours
R ifth ere is a malfunction in the po wer supp ly
The sliding sunroof then rises at there ar in order
to continue ventilating theve hicle interior. Opening and closing
91

If
th e sliding sunroof is bloc ked during an auto‐
matic closing procedure, thero of is opened
slightly again. The automatic function forthe
sliding sunroof and the side windo wsisthen
deactivated.
Ra in closing function when driving
Ve hicles with a panoramic sliding sunroof: if
it starts torain, thera ised sliding sunroof is
automatically lo wered while theve hicle is in
motion.
Au tomatic lo wering function
Ve hicles with a panoramic sliding sunroof: if
th e sliding sunroof is raised at there ar, it is automatically lo
wered slightly at higher speeds.
At low speeds, it is raised again automaticall y. 000A
WARNING Risk of entrapment byauto‐
matic lo wering of the sliding sunroof
At high speeds thera ised sliding sunroof
automatically lo wersslightly at there ar.
This could trap you or other persons. 0007
Make sure that nobody reaches into the
sweep of the sliding sunroof whilst the
ve hicle is in motion. 0007
If somebody becomes trapped, briefly
push the sliding sunroof button for‐
wa rds or backwards.
The sliding sunroof lifts during opening. Problems with
the sliding sunroof 0009
The term "sliding sun roof" also refers to the
panoramic sliding sunroof. Problem
Possible causes/consequences and 0050 0050Solutions
The sliding sunroof cann otbe closed
and you cannot see the cause. 000A
WARNING Risk of becoming trapped or fata l injury byclosing the sliding sunroof again
If yo u close the sliding sunroof again immediately af ter it has been bloc ked or reset, the sliding sunroof
closes with increased forc e.
Pa rts of the body could become trapped in the closing area in the process. 0007
Make sure that no parts of the body are in the closing area. 92
Opening and closing

Problem
Possible causes/consequences and 0050
0050Solutions 0007
Release the button immediately if somebody becomes trapped.
or 0007
Press the button in any direction during the automatic closing process.
The closing process is stopped. If
th e sliding sunroof is obstructed during closing and reopens again slightly: 0007
Immediately af ter auto matic reve rsing, pull and hold the0057 button down again tothe point of resist‐
ance until the sliding sunroof is closed.
The sliding sunroof will be closed with increased forc e.
If th e sliding sunroof is obstructed again and reopens again slightly: 0007
Repeat the pr evious step.
The sliding sunroof will be closed again with increased forc e.
Ve hicles with a panoramic sliding
sunroof: the sliding sunroof or the
ro ller sunblind does not opera te
smoo thly. 0007
Pull and hold the0057 button little bylittle until the sliding sunroof is fully closed. 0007
Pull and hold the0057 button little bylittle until thero ller sunblind is fully closed. 0007
Use automatic operation tofully open and then close the sliding sunroof. Opening and closing
93

Note
s onthe cor rect driver's seat position 000A
WARNING Risk of inju rythro ugh adjust‐
ing vehicle settings while theve hicle is in
motion
Yo u could lose cont rol of theve hicle in the
fo llowing situations:
R ifyo u adjust the driver's seat, the head
re stra ints, thesteering wheel or the mir‐
ro r while theve hicle is in motion
R ifyo ufast enyour seat belt while theve hi‐
cle is in motion 0007
Before starting the engine: adjust the
driver's seat, the head restra ints, the
st eering wheel or the mir ror and fasten
yo ur seat belt. Ensure
thefo llowing when adjusting thesteering
wheel 1, seat belt 2and driver's seat 3:
R you are as faraw ay from the driver's airbag
as possible
R you are sitting in an upright position
R your thighs are slight lysuppor tedby the seat
cushion R
your legs are not fully extended and you can
depress the pedals properly
R the back of your head is suppo rted at eye
le ve lby the cent reofthe head restra int
R you can hold thesteering wheel with your
arms slightly bent
R you can mo veyour legs freely
R you can see all the displa yson the instru‐
ment clus ter clea rly
R you ha vea good overview of the traf fic con‐
ditions
R your seat belt is pulled snug lyagainst your
body and is routed across the cent reofyour
shoulder and across your hips in the pelvic
area Seats and
stowing 97

Fi
tting/ removing the rear seat head
re stra ints
Re mo val 0007
Release there ar seat backrest and fold it
slight lyforw ards (0013 page113). 0007
Pull the head restra int upwards as far as it
will go. 0007
Push release knob 1inthe direction of the
ar row and pull out the head restra int.
Fi tting 0007
Inse rtthe head restra int such that the
notches on the bar are on the left when
vie we d in the direction of tra vel. 0007
Push the head restra int down until you hear
it en gage in position. 0007
Foldthere ar seat backrest back until it
engages. Configuring
the seat settings Multimedia sy
stem:
0018 © 0019
Comfort 0019
Seat comfort 0007
Select a seat.
Ad justing the backrest side bols ters 0007
Select Side bolsters . 0007
Adjust the air cushions. Ad
justing the seat contour in the lumbar
re gion of the seat backrest (lumbar) 0007
Select Lumbar . 0007
Adjust the air cushions. Selecting
the massage prog ramme for the
front seats Multimedia sy
stem:
0018 Vehicle 0019
a Seats 0007
Select Driver's seat orPassenger . 0007
Select Massage. 0007
Select a massage programme.
The massage programme runs for appro x‐
ima tely 9to 15 minutes, depending on the
setting. 0007
Toset the massage intensit y:switch High
intensity on0073 or off 0053. Seats and
stowing 103

ments placed on
the seats e.g. seat cushions
or child seats. This could cause damage to
th e seat sur face. 0007
Makesure that no objects or docu‐
ments are on the seats when the seat
heater is switched on. Re
quirements:
R the po wer supp lyis switched on 0007
Toswitch on/increase the le vel:press but‐
to n1 repeatedly until the desired heating
le ve l is set.
Depending on the heating le vel, up tothree
indicator lamps light up. 0007
Toswitch off/reduce the le vel:press but‐
to n1 repeatedly until the desired heating
le ve l is set.
If all indicator lamps are off, the seat heater
is switched off.
0009 The seat heater automatically switches down
from theth re e heating le vels af ter 8, 10and
20 minutes until the seat heater is switched
off. Setting
the panel heating Multimedia sy
stem:
0018 Vehicle 0019
î Vehicle settings
0019 Panel heating
When the seat heater is switched on, the armr‐
ests in theve hicle as well as the cent reconsole
can be hea ted using this function.
Setting options 0007
Select Front and rear, Front only,Rear only
or Off . Switching
the seat ventilation on/off Re
quirements:
R the po wer supp lyis switched on 106
Seats and stowing

0007
Toswitch on/increase the le vel:press but‐
to n1 repeatedly until the desired ventila‐
tion le vel is set.
Depending on theve ntilation le vel, up to
th re e indicator lamps light up. 0007
Toswitch off/reduce the le vel:press but‐
to n1 repeatedly until the desired ventila‐
tion le vel is set.
If all indicator lamps are off, the seat ventila‐
tion is switched off. Ste
ering wheel Ad
justing the steering wheel manually 000A
WARNING Risk of inju rythro ugh adjust‐
ing vehicle settings while theve hicle is in
motion
Yo u could lose cont rol of theve hicle in the
fo llowing situations:
R ifyo u adjust the driver's seat, the head
re stra ints, thesteering wheel or the mir‐
ro r while theve hicle is in motion R
ifyo ufast enyour seat belt while theve hi‐
cle is in motion 0007
Before starting the engine: adjust the
driver's seat, the head restra ints, the
st eering wheel or the mir ror and fasten
yo ur seat belt. 000A
WARNING Risk of entrapment forch il‐
dren when adjusting thesteering wheel
Children could injure themselves if they
adjust thesteering wheel. 0007
Never lea vechildren unat tended in the
ve hicle. 0007
When leaving theve hicle, alw aysta ke
th eke y with you and lock theve hicle.
This also applies tothe digital vehicle
ke y if the "Digital Vehicle Key" function
is activated via Mercedes me connect. 0007
Push release le ver1 down as far as it will
go.
The steering column is unloc ked. 0007
Adjust height 2and di stance 3tothe
st eering wheel. 0007
Push release le ver1 up as far as it will go.
The steering column is loc ked. 0007
Check and make sure that thesteering col‐
umn is loc kedby moving thesteering wheel. Seats and
stowing 107