turn signal bulb MERCEDES-BENZ C240 2005 W203 Owner's Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2005, Model line: C240, Model: MERCEDES-BENZ C240 2005 W203Pages: 442, PDF Size: 4.62 MB
Page 328 of 442
326 Practical hintsWhat to do if …Display symbol
Display message
Possible cause
Possible solution
.
Turn signal
left front
The left front turn signal lamp is
malfunctioning.
Replace the bulb as soon as possible.
Turn signal
right front
The right front turn signal lamp is
malfunctioning.
Replace the bulb as soon as possible.
Turn signal
left mirror
The left turn signal in the side mirror is
malfunctioning. This message will only
appear if all light emitting diodes have
stopped working.
Visit an authorized Mercedes-Benz
Center as soon as possible.
Turn signal
right mirror
The right turn signal in the side mirror is
malfunctioning. This message will only
appear if all light emitting diodes have
stopped working.
Visit an authorized Mercedes-Benz
Center as soon as possible.
Turn signal
left rear
Substitute bulb on
The left rear turn signal lamp is
malfunctioning.
A substitute bulb is being used.
Replace the bulb as soon as possible.
Turn signal
right rear
Substitute bulb on
The right rear turn signal lamp is
malfunctioning.
A substitute bulb is being used.
Replace the bulb as soon as possible.
Page 347 of 442
345 Practical hints
Replacing bulbs
Front lamps Rear lamps
Lamp
Type
1
Additional turn signal
lamp
LED
2
Halogen headlamp:
Turn signal lamp
Bi-Xenon* headlamp:
Turn signal lamp
1156 A
2357 A
3
Halogen headlamp:
Low beam
Bi-Xenon* headlamp:
Low and high beam
1
1Vehicles with Bi-Xenon* headlamps: Low beam
and high beam use the same D2S-35W lamp. Do
not replace the Xenon bulbs yourself. See an
authorized Mercedes-Benz Center.
H7 (55 W)
D2S-35 W
Lamp
Type
4
Halogen headlamp:
High beam/high beam
flasher
Bi-Xenon* headlamp:
High beam flasher
H7 (55 W)
H7 (55 W)
Parking and standing
lamp
W5W
5
Front fog lamp
HB4/9006
(55 W)
6
Side marker lamp
W5W
Lamp
Type
7
High mounted brake
lamp
LED
8
Brake lamp
P21W
9
Turn signal lamp
PY 21 W
a
Parking and side
marker lamp
P 21/5 W
b
Backup lamp
P21W
c
License plate lamps
C5W
d
Rear fog lamp (driver’s
side only), tail and
standing lamp
P 21/4 W
Page 348 of 442
346 Practical hintsReplacing bulbs
Notes on bulb replacement
Only use 12 volt bulbs of the same type
and with the specified watt rating.
Switch lights off before changing a bulb
to prevent short circuits.
Always use a clean lint-free cloth when
handling bulbs.
Your hands should be dry and free of oil
and grease.
If the newly installed bulb does not
come on, visit an authorized
Mercedes-Benz Center.Have the LEDs and bulbs for the following
lamps replaced by an authorized
Mercedes-Benz Center:
Additional turn signals in the exterior
rear view mirrors
High mounted brake lamp
Xenon* lamps
Front fog lamps
Warning!
G
Bulbs and bulb sockets can be very hot.
Allow the lamp to cool down before
changing a bulb.
Keep bulbs out of reach of children.
Halogen lamps contain pressurized gas.
A bulb can explode if you
touch or move it when hot
drop the bulb
scratch the bulb
Wear eye and hand protection.
Because of high voltage in Xenon lamps, it is
dangerous to replace the bulb or repair the
lamp and its components. We recommend
that you have such work done by a qualified
technician.
iHave the headlamp adjustment
checked regularly.
Page 349 of 442
347 Practical hints
Replacing bulbs
Replacing bulbs for front lamps
Before you start to replace a bulb for a
front lamp, do the following first:
Turn the exterior lamp switch to
positionM (
page 109).
Open the hood (
page 278) (except
for side marker lamps).
Halogen headlamp
1Housing cover for low beam headlamp
2Housing cover for high beam head-
lamp, parking and standing lamp3Bulb socket for turn signal lamp bulb
4Bulb socket for low beam bulb
5Bulb socket for high beam bulb
6Bulb socket for parking and standing
lamp bulbLow beam bulb
Press the clamp on housing cover1
and remove it.
Pull the electrical connector off.
Turn bulb socket4 counterclockwise
and take out the bulb.
Insert the new bulb so that its socket
locates in the recess of the lamp
housing.
Turn bulb socket4 clockwise until it
engages.
Plug the electrical connector onto the
bulb.
Align housing cover1 and press until
it engages.
Page 350 of 442
348 Practical hintsReplacing bulbsHigh beam bulb
Press the clamp on housing cover2
and remove it.
Pull the electrical connector off.
Turn bulb socket5 counterclockwise
and take out the bulb.
Insert the new bulb so that its socket
locates in the recess of the lamp
housing.
Turn bulb socket5 clockwise until it
engages.
Plug the electrical connector onto the
bulb.
Align housing cover2 and press until
it engages.Front turn signal lamp bulb
Turn bulb socket3 with the bulb
counterclockwise and remove it.
Press gently onto the bulb and turn it
counterclockwise out of bulb
socket3.
Press new bulb gently into bulb
socket3 and turn clockwise until it
engages.
Place bulb socket3 back into the
lamp and turn it clockwise.Parking and standing lamp bulb
Press the clamp on housing cover2
and remove it.
Pull out bulb socket6 with the bulb.
Pull the bulb out of bulb socket6.
Press the new bulb into bulb socket6.
Press bulb socket6 back into the
lamp.
Align housing cover2 and press until
it engages.
Page 351 of 442
349 Practical hints
Replacing bulbs
Bi-Xenon* headlamp
1Housing cover for Bi-Xenon headlamp
2Housing cover for high beam flasher,
parking and standing lamp3Bulb socket for turn signal lamp bulb
4Bulb socket for high beam flasher bulb
5Bulb socket for parking and standing
lamp bulbHigh beam flasher bulb
Press the clamp on housing cover2
and remove it.
Pull the electrical connector off.
Turn bulb socket4 counterclockwise
and take out the bulb.
Insert the new bulb so that its socket
locates in the recess of the lamp
housing.
Turn bulb socket4 clockwise until it
engages.
Plug the electrical connector onto the
bulb.
Align housing cover2 and press until
it engages.
Warning!
G
Do not remove the cover1 for the
Bi-Xenon headlamp. Because of high voltage
in Bi-Xenon lamps, it is dangerous to replace
the bulb or repair the lamp and its compo-
nents. We recommend that you have such
work done by a qualified technician.
Page 352 of 442
350 Practical hintsReplacing bulbsFront turn signal lamp bulb
Turn bulb socket3 with the bulb
counterclockwise and remove it.
Press gently onto the bulb and turn it
counterclockwise out of bulb
socket3.
Press new bulb gently into bulb
socket3 and turn clockwise until it
engages.
Place bulb socket3 back into the
lamp and turn it clockwise.Parking and standing lamp bulb
Press the clamp on housing cover2
and remove it.
Pull out bulb socket5 with the bulb.
Pull the bulb out of bulb socket5.
Press the new bulb into bulb socket5.
Press bulb socket5 back into the
lamp.
Align housing cover2 and press until
it engages.Side marker lamp
Carefully slide the lamp towards the
rear in direction of arrows.
Remove the front end first.
Turn the bulb socket with the bulb
counterclockwise and remove it.
Pull the bulb out of the bulb socket.
Insert the new bulb into the bulb
socket.
Place the bulb socket back into the
lamp and turn it clockwise.
To reinstall the lamp, set the rear end in
the bumper and let the front end
engage.
Page 353 of 442
351 Practical hints
Replacing bulbs
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
Turn the exterior lamp switch to
positionM (
page 109).
Open the trunk lid (
page 92).
Tail lamp unit
1Latch
Fold the corresponding trim panel to
the side.
Turn latch1 to vertical position and
remove the bulb carrier.
Bulb carrier2Brake lamp bulb
3Backup lamp bulb
4Rear fog lamp (driver’s side only),
tail and standing lamp bulb
5Parking and side marker lamp bulb
6Turn signal lamp bulb
Press gently onto the respective bulb
and turn counterclockwise out of its
bulb socket.
Press the new bulb gently into its bulb
socket and turn clockwise until it
engages.
Reinstall the bulb carrier and lock it
again with latch1.
Reinstall the trim panel.
License plate lamp
1Screw
Loosen both screws1.
Remove the license plate lamp.
Replace the bulb.
Reinstall the license plate lamp.
Retighten screws1.
Page 410 of 442
408 Index
Starting with 47
Steering wheel gearshift control
(C 55 AMG only) 164
Transmission fluid 282
B
BabySmart
TM
Air bag deactivation system 70, 399
Compatible child seats 70, 399
Self-test 70
Backrest
Folding forward 238
Folding rearward 238
Backrest contour
Adjusting 104
Backrest side bolsters
Adjusting 104
Backrest tilt
Manual seat 36
Power seat* 38
Backup lamps
Messages in display 323
Replacing bulbs 345BAS 78, 399
Messages in display 311
Batteries, SmartKey
Changing 343
Check lamp 90
Checking 91
Battery discharged
Jump starting 363
Battery, vehicle 284, 360
Charging 361
Disconnecting 361
Reconnecting 362
Reinstalling 361
Removing 361
Bi-Xenon headlamps* 399
Bi-Xenon type*
Front lamp bulbs 349
Block heater (Canada only) 291
Blocking
Rear door window operation 75
Bolts
For spare wheel 336Brake Assist System see BAS
Brake fluid 390
Checking 277
Message in display 315
Brake lamp bulbs 345
Brake lamp, high mounted 345
Brake lamps
Messages in display 323
Brake pads
Message in display 315
Brakes 266
Warning lamp 25, 303
Break-in period 264
Bulbs, replacing 344
Additional turn signals 345
Backup lamps 345, 351
Brake lamps 345, 351
Fog lamp, rear 345, 351
Fog lamps, front 345
Front lamps 345
High beam flasher 345
High beam headlamps 345
Page 421 of 442
419 Index
Key, SmartKey
Battery check lamp 89
Checking the batteries 91
Factory setting 89
Global locking 89
Global unlocking 89
Loss of 91
Messages in display 322
Positions in starter switch 33
Remote control 88
Restoring to factory setting 90
Selective setting 89
Starting the engine,
automatic transmission* 47
Starting the engine,
manual transmission 46
Turning off the engine 56
Unlocking the trunk lid 91
Unlocking with 32
Kickdown 163, 401
Kilometers/miles in speedometer 135
Km/h or mph in speedometer 135L
Labels, identification 376
Lamp bulbs, exterior 344
Lamp sensor
Message in display 324
Lamps, exterior
Front 345
Light sensor 324
Messages in display 323–326
Rear 345
Lamps, indicator and warning
ABS 25, 302
Battery (SmartKey) 89
Brakes 25, 303
Engine diagnostics 304, 307
Engine malfunction 25, 304–305
ESP 25, 306
Front fog lamps 109
Front passenger
front air bag off 27, 63, 70, 308
Fuel reserve 25, 307
High beam headlamps 25Instrument cluster 302–307
Low beam headlamps 25
Maintenance service indicator 292
Rear fog lamp 109
Seat belt telltale 25, 307
SRS 25, 59, 307
Turn signals 25
Language
Multifunction display 136
Setting 136
LATCH-type child seat anchors 73
Folding back 74
Layout of poly-V-belt drive 377
Leather upholstery
Cleaning 299
Lever for voice control system* 23
License plate lamps
Messages in display 324
Replacing bulbs 345
Light alloy wheels
Cleaning 298
Technical data 381, 382