turn signal bulb MERCEDES-BENZ C240 4MATIC WAGON 2004 S203 Owner's Manual

296 Practical hintsWhat to do if …Display symbol
Display message
Possible cause
Possible solution
.
TAIL LIGHT, R
CHECK LIGHTS!

BACK-UP LIGHT ON!

The right tail lamp is malfunctioning.
A backup bulb is being used.

Visit an authorized Mercedes-Benz
Center as soon as possible.
TURN SIG., LF
CHECK LIGHT!
The left front turn signal lamp is
malfunctioning.

Replace the bulb as soon as possible.
TURN SIG., RF
CHECK LIGHT!
The right front turn signal lamp is
malfunctioning.

Replace the bulb as soon as possible.
TURN SIG., LR
CHECK LIGHT!

The left rear turn signal lamp is
malfunctioning.

Replace the bulb as soon as possible.
TURN SIG., RR
CHECK LIGHT!

The right rear turn signal lamp is
malfunctioning.

Replace the bulb as soon as possible.
TURN SIG. MIRROR, L
CHECK LIGHT!
The left turn signal in the side mirror is
malfunctioning. This message will only
appear if all light emitting diodes have
stopped working.

Have the LEDs replaced as soon as
possible.
TURN SIG. MIRROR, R
CHECK LIGHT!
The right turn signal in the side mirror is
malfunctioning. This message will only
appear if all light emitting diodes have
stopped working.

Have the LEDs replaced as soon as
possible.

310 Practical hintsReplacing bulbs
Replacing bulbsSafe vehicle operation depends on proper
exterior lighting and signaling. It is there-
fore essential that all bulbs and lamp
assemblies are in good working order at all
times.
Correct headlamp adjustment is extremely
important. Have headlamps checked and
readjusted at regular intervals and when a
bulb has been replaced. See your autho-
rized Mercedes-Benz Center for headlamp
adjustment.
Bulbs Front lamps
iBackup bulbs will be brought into use
when the following lamps malfunction:

Standing lamps


Tail lamps


Rear fog lamp
Lamp
Type
1
Additional turn signal
lamps
LED
2
Turn signal lamp
Halogen
Turn signal lamp
Bi-Xenon*
1156 A
2357 A
3
Halogen headlamps:
Low beam
Bi-Xenon* headlamps:
Low and high beam
H7 (55 W)
D2S-35 W
4
Halogen headlamps:
High beam
Bi-Xenon* headlamps:
High beam flasher
H7 (55 W)
H7 (55 W)
Parking and standing
lamps
W5W
5
Fog lamp
HB4/9006
(55 W)
6
Side marker lamp
W5W

311 Practical hints
Replacing bulbs
Rear lamps Notes on bulb replacement


Only use 12 volt bulbs of the same type
and with the specified watt rating.


Switch lights off before changing a bulb
to prevent short circuits.


Always use a clean lint-free cloth when
handling bulbs.


Your hands should be dry and free of oil
and grease.


If the newly installed bulb does not
come on, visit an authorized
Mercedes-Benz Center.


Have the LEDs and bulbs for the
following lamps replaced by an
authorized Mercedes-Benz Center:

Additional turn signals in the
exterior rear view mirrors


High mounted brake lamp


Xenon lamps


Front fog lamps
Lamp
Type
7
High mounted brake
lamp
LED
8
Brake lamp
P21W
9
Turn signal lamp
PY 21 W
a
Backup lamp
P21W
b
Tail, parking,
standing and side
marker lamp
P21/5W
c
License plate lamps
C5W
d
Rear fog lamp,
driver’s side
P21/4W
Warning!
G
Keep bulbs out of reach of children.
Bulbs and bulb sockets can be very hot.
Allow the lamp to cool down before
changing a bulb.
Halogen lamps contain pressurized gas.
A bulb can explode if you:

touch or move it when hot


drop the bulb


scratch the bulb
Wear eye and hand protection.
Because of high voltage in Xenon lamps, it is
dangerous to replace the bulb or repair the
lamp and its components. We recommend
that you have such work done by a qualified
technician.

312 Practical hintsReplacing bulbsReplacing bulbs for front lamps
Halogen headlamps
1Bulb socket for turn signal lamp
2Headlamp cover for high beam head-
lamp and for parking and standing
lamp
3Headlamp cover for low beam head-
lamp4Low beam bulb
5High beam bulb
6Bulb socket for parking and standing
lamp
Low and high beam bulb

Switch off the lights.

Open the hood (
page 252).

Press the clamp and remove headlamp
cover2 or3.

Pull electrical connector off.

Unclip the retainer springs and take out
the bulb.

Insert the new bulb so that the base
locates in the recess on the holder.

Clip the retainer springs and plug the
connector onto the bulb.

Align headlamp cover2 or3 and
click into place.
Front turn signal lamp bulb

Switch off the lights.

Open the hood (
page 252).

Twist bulb socket1 counterclockwise
and pull out.

Push bulb into socket, turn counter-
clockwise and remove.

Insert new bulb in socket, push in and
twist clockwise.

Reinsert bulb socket in lamp and twist
clockwise.

313 Practical hints
Replacing bulbs
Parking and standing lamp bulb
Switch off the lights.

Open the hood (
page 252).

Press the clamp and remove headlamp
cover2.

Pull out bulb socket6 with the bulb.

Pull the bulb out of bulb socket.

Insert a new bulb in the socket.

Reinstall bulb socket.

Align headlamp cover2 and click into
place.Bi-Xenon* headlamps
1Bulb socket for turn signal lamp
2Headlamp cover for high beam flasher,
parking and standing lamp
3Cover for Bi-Xenon lamp4High beam flasher bulb
5Bayonet socket for high beam flasher
bulb
6Bulb socket for parking and standing
lamp
High beam bulb for high beam flasher

Switch off the lights.

Open the hood (
page 252).

Press the clamp and remove lamp
cover2.

Pull electrical connector4 off.
Warning!
G
Do not remove the cover3 for the
Bi-Xenon headlamp. Because of high voltage
in Bi-Xenon lamps, it is dangerous to replace
the bulb or repair the lamp and its compo-
nents. We recommend that you have such
work done by a qualified technician.


314 Practical hintsReplacing bulbs
Twist bayonet socket5 counterclock-
wise to the stop (do not remove).

Pull the bulb out of the socket.

Insert the new bulb so that the base
locates in the recess in bayonet
socket5.

Twist bayonet socket clockwise until
you hear it snap into place.

Plug the connector onto the bulb.

Align lamp cover2 and click into
place.Front turn signal lamp bulb

Switch off the lights.

Open the hood (
page 252).

Twist bulb socket1 counterclockwise
and pull out.

Push bulb into socket, turn counter-
clockwise and remove.

Insert new bulb in socket, push in and
twist clockwise.

Reinsert bulb socket in lamp and twist
clockwise.Parking and standing lamp bulb

Switch off the lights.

Open the hood (
page 252).

Press the clamp and remove lamp
cover2.

Pull out bulb socket6 with the bulb.

Pull the bulb out of bulb socket.

Insert a new bulb in the socket.

Reinstall bulb socket.

Align lamp cover2 and click into
place.


316 Practical hintsReplacing bulbs4Brake lamp
5Turn signal lamp
6Backup lamp
7Rear fog lamp (driver’s side)/tail lamp,
parking, standing and side marker
lamp

Gently push bulb into socket, turn
counterclockwise and pull out.

Insert new bulb and turn clockwise.

Reinstall bulb socket.

Reinstall bulb holder and close trim
panel.License plate lamp
1Screws

Switch off the lights.

Loosen both screws1 and remove
lamp.

Replace the tubular lamp and reinstall
lamp.

Retighten the screws.

366 IndexBattery discharged
Jump starting 327
Battery, vehicle 258, 324
Charging 325
Disconnecting 325
Messages in display 285
Reconnecting 326
Reinstalling 325
Removing 325
Bi-Xenon headlamps* 357
Bi-Xenon type
Front lamp bulbs 313
Block heater 264
Blocking
Rear door window operation 72
Bolts
For Minispare wheel 304
Brake assist system (BAS) 357
Brake fluid 251, 348Brake lamp bulbs 311
Brake lamp, high mounted 311
Brake pads
Message in display 286
Brakes 240
Warning lamp 275
Break-in period 238
Bulbs, replacing 310
Additional turn signals 310
Backup lamps 311
Brake lamps 311
Fog lamps 310
Front lamps 310
High beam 310
High mounted brake lamp 311
License plate lamps 311, 316
Low beam 310
Parking lamps 310, 311, 313, 314
Rear fog lamp 311
Rear fog lamps 315Side marker lamps 310, 315
Standing lamps 310, 311, 313, 314
Tail lamp assemblies 311, 315
Turn signal lamps 310, 311
Button
Audio system 172
C
CAC (Customer assistance center) 357
California
Important notice 11
Calling up
Range (distance to empty) 136
Service indicator 266
CAN system 357
Capacities
Fuels, coolants, lubricants, etc. 346
Cargo area see Cargo compartment
Cargo compartment
Auxiliary fuse box 334
Lighting 106
Parcel net 208

376 IndexL
Labels, identification 338
Lamp bulbs, exterior 310
Lamps, exterior
Front 310
Light sensor 294
Messages in display 293–296
Rear 311
Lamps, indicator and warning
ABS 274
Airbag Off 61
Battery (SmartKey) 85
Brakes 275
CHECK ENGINE 276
Coolant 287
Engine diagnostics 276, 278
ESP 277
Fuel reserve 278
Instrument cluster 274–278
Seat belts 278
Service indicator 265
SRS 57
Turn signals 23Language
Multifunction display 126
Setting 126
LATCH-type child seat anchors 71
Folding back 71
Layout of poly-V-belt drive 339
Leather upholstery
Cleaning 271
License plate lamps
Messages in display 294
Replacing bulbs 311, 316
Light alloy wheels
Cleaning 270
Technical data 342
Light sensor 294
Lighter see Cigarette lighter
Lighting 100
Automatic headlamp mode 101
Cargo compartment 106
Combination switch 104
Daytime running lamp mode 102
Door entry lamps 106
Exterior lamp switch 100Front fog lamps 102
High beam flasher 104
High beams 104
Instrument cluster illumination 107
Interior 105
Locator lighting 102
Low beam 100
Manual headlamp mode 101
Night security illumination 102
Parking lamps 100
Rear fog lamp 103
Settings (control system) 127
Limiting the gear range 141
Limp Home Mode 144
Loading 205
Cargo tie-down rings 214
Instructions 213
Roof rack 205
Ski sack* 205
Split rear bench seat 211
Locator lighting 102
Setting 128

382 IndexRear view mirror automatic antiglare 146
Rear view mirrors see Mirrors
Rear window defroster 149
Rear window wiper/washer 49
Reconnecting
Vehicle battery 326
Refrigerant
Air conditioning 348
Refueling 249
Regular checks 251
Reinstalling vehicle battery 325
Remote control
SmartKey 84
Remote door unlock
With Tele Aid* 229
Remote Vehicle Diagnostics 360
Removing
Parcel net in cargo compartment 208
Ski sack 207
Twin-reel roller blind 210
Vehicle battery 325
Wheel 320
Wiper blades 317Replacing
Backup lamp bulbs 315
Brake lamp bulbs 315
Bulbs 310
Front lamp bulbs 312
Front turn signal bulbs 312, 313
Fuses 334
High beam bulbs 312
High beam bulbs
(xenon-type headlamps) 313
License plate lamp bulbs 316
Low beam bulbs 312
Parking lamp bulbs 313, 314
Rear fog lamp bulbs 315
Rear lamp bulbs 311, 315
Rear turn signal bulbs 315
Side marker lamp bulbs 315
Standing lamp bulbs 313, 314
Wiper blades 317
Reporting
Safety defects 18
Reset button in the instrument
cluster 121, 122Resetting
All functions (control system) 121
All functions of a submenu 122
Fuel consumption 135
Service indicator (FSS) 266
Trip odometer 109
Residual heat utilization 167
Residual ventilation 167
REST 360
Restraint system see Infant
and child restraint systems
Restraint systems 360
Rims 341
Roadside Assistance 12
Roadside assistance
Tele Aid* 226
RON 250
RON (Research Octane Number) 360
Roof rack 205
Rotating wheels 262
Rubber parts
Cleaning 272