seats MERCEDES-BENZ C300 SPORT 2008 W204 Owner's Manual

Contents
Controls in detail............................... 69
Locking and unlocking ......................... 70
SmartKey ....................................... 70
SmartKey with KEYLESS-GO*
(Canada only) ................................. 73
Checking batteries in the SmartKey
or SmartKey with KEYLESS-GO*
(Canada only) ................................. 78
Loss of the SmartKey or SmartKey
with KEYLESS-GO* (Canada only) .. 79
Opening doors from the inside ....... 79
Automatic central locking .............. 80
Locking and unlocking
from the inside ............................... 81
Starter switch positions ....................... 82
SmartKey ....................................... 82
SmartKey with KEYLESS-GO*
(Canada only) ................................. 83
Seats.................................................... 85
Seat adjustment ............................. 85
Lumbar support .............................. 91
Seat heating* ................................. 91Steering wheel ..................................... 93
Steering wheel adjustment,
manual ........................................... 93
Steering wheel adjustment,
electrical* (Canada only)................ 94
Easy-entry/exit feature*
(Canada only) ................................. 95
Mirrors ................................................. 97
Interior rear view mirror ................. 97
Exterior rear view mirrors............... 97
Power folding
exterior rear view mirrors* ............. 98
Interior rear view mirror,
antiglare position ........................... 99
Auto-dimming rear view mirrors* . 100
Activating exterior rear view mirror
parking position* (Canada only)... 101
Memory function* (Canada only) ....... 102
Storing positions into memory* ... 103
Recalling positions from memory* 103
Storing exterior rear
view mirror parking position*....... 104
Fastening the seat belts .................... 105
Proper use of seat belts ............... 106
Seat belt height adjustment ......... 107Lighting ............................................. 108
Exterior lamp switch .................... 108
Switching on high beams ............. 112
Headlamp cleaning system* ........ 112
Corner-illuminating front
fog lamps* (With Bi-Xenon*
headlamps only)........................... 112
Hazard warning flasher ................ 114
Interior lighting ............................ 114
Door entry lamps ......................... 116
Trunk lamp ................................... 116
Windshield wipers ............................. 117
Switching on/off
windshield wipers ........................ 118
Single wipe .................................. 118
Intermittent wiping ...................... 118
Wiping with
windshield washer fluid................ 119
Power windows ................................. 120
Opening and closing
power windows ............................ 120
Summer opening feature ............. 123
Convenience closing feature ........ 124

43 Safety and Security
Occupant safety
More information about air bag display
messages (
page 393).
When the OCS senses that the front passen-
ger seat occupant is classified as an adult or
someone larger than a small individual, the
5/indicator lamp will illuminate for
approximately 6 seconds when the engine is
started and then go out, indicating that the
front passenger front air bag is activated.
If the 5/indicator lamp is
illuminated, the front passenger front air
bag is deactivated and will not be deployed.
If the 5/indicator lamp is not
illuminated, the front passenger front air
bag is activated and will be deployed:

in the event of certain frontal impacts

if impact exceeds a preset deployment
threshold

independently of the front side impact
air bags and/or rear side impact air
bags*.
If the front passenger front air bag is
deployed, the rate of inflation will be
influenced by:

the rate of relevant vehicle deceleration
as assessed by the air bag control unit

front passenger’s weight category as
identified by the Occupant Classification
System (OCS).
Warning!G
According to accident statistics, children
are safer when properly restrained in the
rear seating positions than in the front seat-
ing position. Thus, we strongly recommend
that children be placed in the rear seats
whenever possible. Regardless of seating
position, children 12 years old and under
must be seated and properly secured in an
appropriate infant or child restraint recom-
mended for the size and weight of the child.
The infant or child restraint must be properly
secured with the vehicle’s seat belt, the seat
belt and top tether strap, or lower anchors
and top tether strap, fully in accordance
with the child seat manufacturer’s
instructions.
Children can be killed or seriously injured by
an inflating air bag. Note the following im-
portant information when circumstances re-
quire you to place a child in the front
passenger seat:

Your vehicle is equipped with air bag
technology designed to turn off the front
passenger front air bag in your vehicle
when the system senses the weight of a
typical 12-month-old child or less along
with the weight of a standard appropri-
ate child restraint on the front passen-
ger seat.

A child in a rear-facing child restraint on
the front passenger seat will be
seriously injured or even killed if the
front passenger front air bag inflates in
a collision which could occur under
some circumstances, even with the air
bag technology installed in your vehicle.
The only means to completely eliminate
this risk is to never place a child in a
rear-facing child restraint in the front
seat. We therefore strongly recommend
that you always place a child in a rear-
facing child restraint in the back seat.


46 Safety and Security
Occupant safety
For more information, see the “Practical
hints” section (
page 385).
Seat belts
The use of seat belts and infant and child
restraint systems is required by law in all
50 states, the District of Columbia, the
U.S. territories and all Canadian provinces.
Even where this is not the case, all vehicle
occupants should have their seat belts fas-
tened whenever the vehicle is in motion.
For more information, see “Fastening the
seat belts” (
page 105).
Warning!G
Never place anything between seat cushion
and child seat (e.g. pillow), since it reduces
the effectiveness of the Occupant Classifi-
cation System. The bottom of the child seat
must make full contact with the passenger
seat cushion. An incorrectly mounted child
seat could cause injuries to the child in case
of an accident, instead of increasing protec-
tion for the child.
Follow the manufacturer’s instructions for
installation of child seats.
iFor information on infants and children trav-
eling with you in the vehicle and restraint sys-
tems for infants and children, see “Children in
the vehicle” (
page 51).
Warning!G
Always fasten your seat belt before driving
off. Always make sure all of your passengers
are properly restrained.
Failure to wear and properly fasten and po-
sition your seat belt greatly increases your
risk of injuries and their likely severity in an
accident. You and your passengers should
always wear seat belts.
If you are ever in an accident, your injuries
can be considerably more severe without
your seat belt properly buckled.
Without your seat belt buckled, you are
much more likely to hit the interior of the ve-
hicle or be ejected from it. You can be seri-
ously injured or killed.
In the same crash, the possibility of injury or
death is lessened if you are properly wearing
your seat belt. Air bags can only protect as
they are designed for, if the occupants are
properly wearing their seat belts.

49 Safety and Security
Occupant safety
intensity for a maximum of 60 seconds
or until the driver’s and the front
passenger’s seat belt are fastened.
If you and/or your front passenger
release the seat belt during driving, the
seat belt telltale< starts flashing
and a warning chime sounds as
described before.
If the driver’s or the front passenger’s
seat belt remains unfastened after
60 seconds, the warning chime stops
sounding, the seat belt telltale<
stops flashing but continues to be
illuminated.
After a vehicle standstill, the warning
chime reactivates and the seat belt
telltale< flashes again when the
vehicle speed exceeds 15 mph
(25 km/h).
The seat belt telltale< will only go out
if both the driver’s and the front passen-
ger’s seat belt (with the front passenger
seat occupied) are fastened, or the vehicle
is standing still and a front door is opened.For more information, see “Practical hints”
(
page 380).
Emergency tensioning device (ETD),
seat belt force limiter
The seat belts are equipped with Emergen-
cy Tensioning Devices (ETDs) and seat belt
force limiters.
The ETD is designed to activate in the
following cases:

in frontal or rear-end impacts exceed-
ing the system deployment threshold

in certain vehicle rollovers

if the restraint systems are operational
and functioning correctly,
see=indicator lamp (
page 382)In an impact, the ETDs remove slack from
the seat belts in such a way that the seat
belts fit more snugly against the body. Seat
belt force limiters, when activated, are em-
ployed to help reduce the peak force exert-
ed by the seat belts on occupants during a
crash.
iThe ETDs for the front seats will only acti-
vate if the front seat belt is fastened (latch plate
properly inserted into buckle).
The ETDs for the rear seats will activate with or
without the respective seat belt fastened.
iETDs do not correct an incorrect seat posi-
tion or incorrectly worn seat belts.
ETDs do not pull occupants back toward the
backrest.
Warning!G
A pyrotechnic Emergency Tensioning Device
(ETD) that was activated must be replaced.
When disposing of the pyrotechnic Emer-
gency Tensioning Device (ETD), our safety
instructions must be followed. These are
available at an authorized Mercedes-Benz
Center.

50 Safety and Security
Occupant safety
Active head restraints
The active head restraints are intended to
offer the driver and front passenger in-
creased protection from whiplash type in-
juries. In the event of a rear-end collision,
the active head restraints on the driver’s
and front passenger’s seats are designed
to move forward in the direction of travel,
providing the head with increased support
earlier on in the collision sequence. The ac-
tive head restraints move forward whether
the seat is occupied or not.If the active head restraints have been trig-
gered in an accident, the active head re-
straints must be reset. Otherwise, the
active head restraints cannot offer any ad-
ditional protection in the event of another
rear-end collision.
For information on resetting the activated
active head restraints, see “Resetting acti-
vated head restraints” (
page 427).
You cannot remove the active head re-
straint on the driver’s and front passen-
ger’s seats.
For removal contact an authorized
Mercedes-Benz Center.For information on head restraint adjust-
ment, see “Adjusting rear head restraints”
(
page 89).Warning!G
Do not attach any objects (e.g. hangers) to
the head restraint posts. Otherwise, the ac-
tive head restraints may not function prop-
erly or offer the degree of protection they
were designed for in the event of an acci-
dent.Warning!G
Only use seat or head restraint covers which
have been tested and approved by
Mercedes-Benz for your vehicle model.
Using other seat or head restraint covers
may interfere with or prevent the activation
of the active head restraints. Contact an
authorized Mercedes-Benz Center for avail-
ability.
Warning!G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that it is as close to
the head as possible and the center of the
head restraint supports the back of the head
at eye level. This will reduce the potential for
injury to the head and neck in the event of
an accident or similar situation.

52 Safety and Security
Occupant safety
The use of infant or child restraints is re-
quired by law in all 50 states, the District
of Columbia, the U.S. territories and all Ca-
nadian provinces.
Infants and small children should be seat-
ed in an appropriate infant or child re-
straint system properly secured in
accordance with the manufacturer’s in-
structions for the child restraint, that com-
plies with U.S. Federal Motor Vehicle
Safety Standards 213 and 225 and Canadi-
an Motor Vehicle Safety Standards 213
and 210.2.A statement by the child restraint manu-
facturer of compliance with these stan-
dards can be found on the instruction label
on the restraint and in the instruction man-
ual provided with the restraint.
When using any infant or child restraint
system, make sure to carefully read and
follow all manufacturer’s instructions for
installation and use.
Please read and observe warning labels af-
fixed to the inside of the vehicle and to
infant or child restraints.
Warning!G
Never release the seat belt buckle while the
vehicle is in motion, since the special seat
belt retractor will be deactivated.
iInformation on child seats with mounting fit-
tings for tether anchorages (
page 54).
For information on LATCH-type child seat
mounts (
page 55).
Warning!G
According to accident statistics, children
are safer when properly restrained in the
rear seating positions than in the front seat-
ing position. Thus, we strongly recommend
that children be placed in the rear seats
whenever possible. Regardless of seating
position, children 12 years old and under
must be seated and properly secured in an
appropriately sized infant restraint, toddler
restraint, or booster seat recommended for
the size and weight of the child.
The infant or child restraint must be properly
secured with the vehicle’s seat belt, the seat
belt and top tether strap, or lower anchors
and top tether strap, fully in accordance
with the child seat manufacturer’s
instructions.

54 Safety and Security
Occupant safety
Installation of infant and child restraint
systems
This vehicle is equipped with tether an-
chorages for a top tether strap at each of
the rear seating positions.
Top tether straps enable an additional con-
nection to be made between child restraint
systems secured with LATCH-type anchors
and rear seats. This can further reduce the
risk of injury.
Warning!G
Infants and small children should never
share a seat belt with another occupant.
During an accident, they could be crushed
between the occupant and seat belt.
A child’s risk of serious or fatal injuries is
significantly increased if the child restraints
are not properly secured in the vehicle
and/or the child is not properly secured in
the child restraint.
Children too big for a toddler restraint must
ride in seats using regular seat belts. Posi-
tion shoulder belt across chest and shoul-
der, not face or neck. A booster seat may be
necessary to achieve proper seat belt posi-
tioning for children over 41 lbs until they
reach a height where a lap/shoulder belt fits
properly without a booster.
When the child restraint is not in use,
remove it from the vehicle or secure it with
the seat belt to prevent the child restraint
from becoming a projectile in the event of
an accident.
Do not leave children unattended in the
vehicle, even if the children are secured in a
child restraint system. Unsupervised chil-
dren in a child restraint system may use
vehicle equipment and may cause an acci-
dent and/or serious personal injury.
Warning!G
Always lock backrest in its upright position
when rear seat bench is occupied by pas-
sengers, before installing top tether straps,
or the extended cargo compartment is not in
use. Check for secure locking by pushing
and pulling on the backrest. If the seat back-
rest is not properly locked, the seat back-
rest could fold. The child seat would no
longer be properly supported or positioned
to provide its intended benefit. That could
cause serious or even fatal injuries.

55 Safety and Security
Occupant safety
1Rear seat head restraint
2Cover of anchorage ring
3Anchorage ring
Move the respective head restraint1
to its uppermost position (
page 89).
Lift up cover2 from anchorage
ring3.
Guide tether strap between head
restraint1 and top of seat back.
Make sure the tether strap is not twist-
ed.3Anchorage ring
4Top tether anchorage hook
Securely fasten hook4, which is part
of the tether strap, to anchorage
ring3.
Lower head restraint1 if necessary
(
page 89).
Make sure the top tether strap can
pass freely between head restraint1
and top of seat backrestOnce the top tether anchorage hook4 is
attached, the child restraint itself can be
secured.
Install the child restraint system and
tighten the top tether strap according
to the child restraint manufacturer’s in-
structions.
After removing the child restraint system
and the top tether strap.
Pull down and close cover2 from the
respective anchorage ring3.
Child seat anchors – LATCH-type
This vehicle is equipped with two LATCH
(L
ower Anchors and Tethers for CHildren)
type anchors (at each of the rear seats) for
the installation of a LATCH-type child seat
with matching mounting fittings. iFor safety reasons, make sure hook4
attaches to ring3 beyond the safety catch, as
illustrated.

56 Safety and Security
Occupant safety
1Indicator
2Cover
3Anchors
Remove covers1 from anchors3 by
pulling it in direction of arrow.
Store covers1, for example in the
storage compartment of the rear cen-
ter armrest.
Split rear bench seat*
Install child seat according to the
manufacturer’s instructions.
A rigid connection is established be-
tween the child seat and the body of
the vehicle.
Warning!G
Children too big for a toddler restraint must
ride in seats using regular seat belts.
Position shoulder belt across chest and
shoulder, not face or neck.
A booster seat may be necessary to achieve
proper seat belt positioning for children over
41 lbs until they reach a height where a
lap/shoulder belt fits properly without a
booster.
Install child seat according to manufactur-
er’s instructions.
The child seat must be firmly attached to the
right and left side anchors.
An incorrectly mounted child seat may come
loose during an accident which could result
in serious injury or death to the child.
Damaged or impact damaged child seats or
child seat anchor fittings must be replaced.
Do not leave children unattended in the
vehicle, even if the children are secured in a
child restraint system.
iNon-LATCH type child seats may also be
used and can be installed using the vehicle’s
seat belt system. Install child seat according to
the manufacturer’s instructions.
!Make sure the seat belt for the center seat
can operate freely with a child seat installed.

57 Safety and Security
Occupant safety
Blocking of rear door window operation
With the override switch you can disable
the rear side window switches in the rear
door panels.
1Indicator lamp
2Override switch
Activating: Press override switch2.
Indicator lamp1 comes on.
The rear door windows can no longer
be operated using the respective
switch located in the rear doors.
Deactivating: Press override
switch2 again.
Indicator lamp1 goes out.
The rear door windows can again be
operated using the respective switch
located in the rear doors.
For more information on power windows,
see the “Controls in detail” section
(
page 120).
Warning!G
Activate the override switch when children
are riding in the back seats of the vehicle.
The children may otherwise injure them-
selves, e.g. by becoming trapped in the win-
dow opening.
When leaving the vehicle, always remove the
SmartKey or SmartKey with KEYLESS-GO*
(Canada only) from the starter switch, take
it with you, and lock your vehicle. Do not
leave children unattended in the vehicle, or
with access to an unlocked vehicle. A child’s
unsupervised access to a vehicle could re-
sult in an accident and/or serious personal
injury.
iOperation of the rear door windows with the
switches located in the driver’s door is still
possible.