navigation MERCEDES-BENZ C320 WAGON 2003 S203 Owner's Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2003, Model line: C320 WAGON, Model: MERCEDES-BENZ C320 WAGON 2003 S203Pages: 370, PDF Size: 11.49 MB
Page 106 of 370
112 Controls in detailControl system
Standard display menu
You can select the functions in the stan-
dard display menu with button
k
or
j
.
The following functions are available:
Display digital speedometer
Press button
j
twice.
The current vehicle speed is shown in
the multifunction display.
AUDIO menu
The functions in the
AUDIO
menu operate
the audio equipment which you currently
have turned on.
If no audio equipment is currently turned
on, the message
AUDIO OFF
i s s h o w n i n t h e
display.
The following functions are available:
iThe headings used in the menus table
are designed to facilitate navigation
within the system and are not neces-
sarily identical to those shown in the
control system displays.
The first function displayed in each
menu will automatically show you
which part of the system you are in.
Function
Page
Call up coolant temperature dis-
play
104
Call up digital speedometer
see
below
Call up FSS
246
Check engine oil level
235
Function
Page
Select radio station
113
Operate CD player*
113
Operate cassette player
114
S203 MY03_A.book Page 112 Tuesday, January 28, 2003 2:22 PM
Page 108 of 370
114 Controls in detailControl systemOperate the cassette player
Turn on the radio and select the cas-
sette player (
page 170) Vehicles
with COMAND*: Refer to separate op-
erating instructions.
Press button
è
or
ÿ
repeatedly
until the settings for the cassette cur-
rently being played are shown in the
display.
1Current side
Press button
j
to fast forward to
the next track.
Press button
k
to rewind the cas-
sette to the beginning of the current
track.
NAVI menu
The
NAV
menu contains the functions need-
ed to operate your navigation system.
Press button
è
or
ÿ
repeatedly
until you see the message NAV
in the
display.
If the navigation system is switched off,
the message
NAV OFF
is shown in the
display.
If the navigation system is on, the mes-
sage
NAV ACTIVE
is shown in the dis-
play.
Please refer to the COMAND* manual for
instructions on how to activate the route
guidance system*.
iTo select the reverse side of the tape,
press button below track number on
the audio system display, or enter re-
quest on the COMAND* system locat-
ed in the center dashboard.
S203 MY03_A.book Page 114 Tuesday, January 28, 2003 2:22 PM
Page 210 of 370
216 Controls in detailUseful featuresUpgrade signals
The Tele Aid system processes calls using
the following priority.
Automatic emergency – First priority
Manual emergency – Second priority
Roadside assistance – Third priority
Information – Fourth priority
Should a higher priority call be initiated
while you are connected, an upgrade (al-
ternating) tone will be heard, and the ap-
propriate indicator lamp will flash. If
certain information such as vehicle identi-
fication number or customer information is
not available, the operator may need to re-
transmit.
During this time you will hear a beep and
voice contact will be interrupted. Voice
contact will resume once the retransmis-
sion is completed. Once a call is conclud-
ed, a beep will be heard and the
appropriate indicator lamp will stop flash-
ing. The COMAND* system operation will
resume.
!If the indicator lamp continues to flash
or the system does not reset, contact
the Response Center at
1-800-756-9018 (in the USA) or
1-888-923-8367 (in Canada), or
Mercedes-Benz Customer Assistance
at 1-800-FOR-MERCedes
(1-800-367-6372) in the USA or Cus-
tomer Service at 1-800-387-0100 in
Canada.iThe indicator lamp in the respective
button flashes until the call is conclud-
ed. Calls can only be terminated by a
Response Center or Customer Assis-
tance Center representative except
Roadside Assistance and Information
calls, which can also be terminated by
pressing button
ì
on the multifunc-
tion steering wheel.
iWhen a Tele Aid call has been initiated,
the audio system or the COMAND* sys-
tem audio is muted and the selected
mode (radio, tape or CD) pauses. The
optional cellular phone (if installed)
switches off. If you must use this
phone, the vehicle must be parked. Dis-
connect the coiled cord and place the
call. The COMAND* navigation system
(if engaged) will continue to run. The
display in the instrument cluster is
available for use and spoken com-
mands are only available by pressing
the RPT button on the COMAND* unit.
A pop-up window will appear in the
COMAND* display to indicate that a
Tele Aid call is in progress.
S203 MY03_A.book Page 216 Tuesday, January 28, 2003 2:22 PM
Page 334 of 370
340 Technical termsCOMAND*
(Cockpit Management and Data Sys-
tem)
Information and operating center for
vehicle sound and communications
systems, including the radio and navi-
gation system, as well as for other op-
tional equipment (CD changer*,
telephone*, etc.).
Control system
The control system is used to call up vehi-
cle information and to change component
settings. Information and messages ap-
pear in the multifunction display. The driv-
er uses the buttons on the multifunction
steering wheel to navigate through the sys-
tem and to adjust settings.
Cruise control
Driving convenience system for automati-
cally maintaining the vehicle speed set by
the driver.Engine number
The number set by the manufacturer and
placed on the cylinder block to uniquely
identify each engine produced.
Engine oil viscosity
Measurement for the inner friction (viscos-
ity) of the oil at different temperatures. The
higher the temperature an oil can tolerate
without becoming thin, or the lower the
temperature it can tolerate without be-
coming viscous, the better the viscosity.
ESP
(Electronic Stability Program)
Improves vehicle handling and direc-
tional stability.
ETD
(Emergency Tensioning Device)
Device which deploys in certain frontal
and rear collisions exceeding the sys-
tem's threshold to tighten the seat
belts.
->SRSFSS
(Flexible Service System)
Service indicator in the multifunction
display that informs the driver when
the next vehicle maintenance service is
due.
Gear range
Number of gears which are available to the
automatic transmission for shifting. The
automatic gear shifting process can be
adapted to specific operating conditions
using the selector lever.
GPS
(Global Positioning System)
Satellite-based system for relaying
geographic location information to and
from vehicles equipped with special re-
ceivers. Employs CD digital maps for
navigation.S203 MY03_A.book Page 340 Tuesday, January 28, 2003 2:22 PM
Page 352 of 370
358 Index
Tailgate 277
Tele Aid* 277
Telephone* 277
Washer fluid 278
Multifunction steering wheel 24, 108,
341
Buttons 108
N
Navigation system
Operating 114
See separate COMAND* operating in-
structions
Network provider 131
Night security illumination 100
Setting 122
O
Occupant safety 56
Airbags 57
Children and airbags 58
Children in the vehicle 65
Fastening the seat belt 40
Infant and child restraint systems 65
LATCH child seat anchors 70
Seat belts 40, 59
Odometer, main 23Oil
Adding 236
Checking level 235
Consumption 235
Dipstick 235
Filler neck 236
Oil level
Checking 233
One-touch gearshifting 136
Canceling gear range limit 136
Downshifting 136
Upshifting 136
Opening
Ashtray 207
Doors from the inside 88
Fuel filler flap 232
Fuel filler flap manually 288
Glove box 203
Hood 234
Side windows 185
Sliding/pop-up roof 187, 290
Sliding/pop-up roof in an
emergency 290
Sliding/pop-up roof with
SmartKey 188
Tailgate 87Windows 184
Windows with SmartKey 186
Operating
Audio system 161
Cassette player 114
CD player 113
COMAND* see separate operating in-
structions
Garage door opener 220
Integrated remote control 220
Navigation system 114
Radio 113
Radio transmitter 230
Safety 16
Telephone 161
Telephone* 131, 178
Vehicle outside the USA and
Canada 13
Operating safety 16
Audio system 161
Operator’s Manual 10
Ornamental moldings 250
Outer seats
Rear seat head restraints 92
Outside temperature indicator 106
Overdue service 246
S203 MY03_A.book Page 358 Tuesday, January 28, 2003 2:22 PM