language MERCEDES-BENZ CL-Class 2002 C215 Comand Manual

230 System settings
Audio Telephone Navigation
Index Info Services and
system settings Introduction
Selecting the language
Press the rotary/pushbutton
to confirm the
highlighted “Language...” menu field in the settings
menu.
The languages list will appear.
1Current language setting appears in red
2Page back, if the arrow is filled in
3Page forward for more languages
Use the rotary/pushbutton to highlight the desired
language and press to confirm.The message “Loading the xx language” will be
displayed.
The language selected will be loaded.
You will hear the corresponding voice output.
Note:
The language affects the menu text displays and the
voice output during route guidance.
After the language has been loaded, the main system
settings menu will appear with the display text in the
language selected.
P82.85-2675-2632
1
12-System-25-US.pm517.10.2001, 11:06 Uhr 230

System settings231Introduction
Audio Telephone
Navigation
Index Info Services and
system settings Set the date and time
COMAND is equipped with an integrated clock. Press
to display the current time. The clock is used e.g.
for indicating the estimated time of arrival at the
destination, page 181.
There are several ways to set the time:
• With GPS reception, page 232
Set the time in 30 minute steps, page 233
Set the time by selecting a country and the time
zone, page 234
• Without GPS reception, page 232
Set the date and time manually, page 236
Note:
The clock must always be reset if the COMAND
system was disconnected or if the vehicle battery
was discharged. List of languages:
• “Adopt from Instrument Cluster” – the system will
use the same language as is set in instrument
cluster
• “Deutsch”
• “English (metric)” – distance measured in km,
speed in km/h
• “English (imperial)” – distance measured in yards,
miles, speed in mph
• “Español“
• “Français“
• “Italiano“
• “Nederlands“
12-System-25-US.pm517.10.2001, 11:06 Uhr 231

System settings239Introduction
Audio Telephone
Navigation
Index Info Services and
system settings Reset all settings to the factory settings
Use the rotary/pushbutton
to highlight the “Factory
settings” menu field in the settings menu and press to
confirm.
An inquiry menu will appear.To accept the factory settings:
Press the rotary/pushbutton
confirm the “Yes” menu
field). A screen with the factory settings is shown for a
few seconds. The main menu for system settings is
reactivated.
The factory settigs are:
• Acknowledgement beep - off
• Info beep – off
• Language – English (imp.)
• Time display – AM/PM
• Date display – MM.DD (MM – month, DD – day)
If you do not wish to reset settings:
Use the rotary/pushbutton to highlight “No” and press
to confirm. This activates the main menu for system
settings.
P82.85-3081-26
12-System-25-US.pm517.10.2001, 11:07 Uhr 239

Index241Introduction
Audio Telephone
Navigation
Index Info Services and
system settings Displaying the route list ................................................ 182
Distance bar ..................................................................... 179
Dolby B, Dolby C ............................................................... 50
Dolby Laboratories Licensing Corporation ................... 50
EEmergency call ................................................................. 121
Entering CD names ........................................................... 71
Entering destination address ........................................ 152
Entering the house number .......................................... 162
Entering the station frequency in the presets ............. 37FFactory settings ............................................................... 239
FM, AM ............................................................................... 23
Frequency ranges ....................................................... 23, 27
Fast forward/rewinding ............................................. 46, 69
Function “RPT” ................................................................. 48
Function “SB” .................................................................... 49
GGeographical latitude and longitude of your
current position .............................................................. 184
GPS reception, set the time ........................................... 233
GPS-signals ...................................................................... 145HHeading-up ...................................................................... 198
House numbers, Entering ............................................. 162IInformation/status line .................................................... 12
Increase the map scale .......................................... 166, 197
Info beep .................................................................... 15, 238
Interrupt route guidance during a journey ................ 208LLast destinations, Selecting ........................................... 174
List of languages ............................................................. 230
Lists ...................................................................................... 12
13-INDEX-25-US.pm517.10.2001, 11:12 Uhr 241