key MERCEDES-BENZ CL-Class 2004 C215 Comand Manual

128 NavigationDestination input
In the case of streets with up to 15
intersections: Select Intersection
menu 
Press g or G to select an
intersection.

Press E.
The Start Route Guidance menu will
appear (
page 134).
Entering a house number
A house number can be entered after
entering the destination street
(
page 125).

Press the
Hse No.
soft key.
Either the menu for entering a house
number or a list of house numbers to
select from will appear (
page 129).

Press h, H, g and G to select
the numbers. After each selection,
press E.

Press F and f to select numbers
diagonally.
or

Press the appropriate number keys
0, 1 to 9.
iYou can enter an intersection instead
of the house number. You cannot enter
both.
iThe
Hse No.
soft key is only available
if appropriate streets are stored on the
navigation DVD.

129 Navigation
Destination input

Press the
Delete
soft key if
necessary.
The number last entered is deleted.

Press E longer than 2 seconds to
confirm.
The Start Route Guidance menu
(page 134) or a list for selecting a
the house number area will appear.Selecting a House Number Area

Press g or G to select the desired
house number area.

Press E.
The Start Route Guidance menu will
appear (
page 134).
Entering a parking
After entering the destination street
(
page 125) or selecting a city center
(page 124), you can select parking
nearby.
iYou can only select admissible
numbers. The number selected
appears magnified. iDo not confuse the Delete soft key
(deletion of the last character) with the
Back soft key (deletion of the complete
entry).
iHouse numbers may be displayed in
the list as single numbers, e.g.
1, or as
number areas, e.g.
2..8
.

130 NavigationDestination input
Press the
Parking
soft key.
The Parking Lot Selection menu is
displayed.
Selecting a parking lot
The map is displayed and shows the
destination and the available parkings lots.

Use the
Next
or
Prev.
soft key to
select a parking lot on the map.
The parking lot selected is marked in
color. The name and distance from the
current position are shown on the
status bar.

Press the
Details
soft key to see
more information about the parking lot.

Press E.
Route guidance will begin.
iIf there is no parking lot near
the destination, the message
No
Parking
Found
will appear.

131 Navigation
Destination input
Selecting a destination using the map
Press c.

Press one of the buttons H, h, g,
G, F, f.
or

Press the
Map
soft key, e.g. in the
Destination Entry menu (
page 121).
The map is shown in full view and
cross-hairs appear.
If soft key displays are hidden:

Press any soft key.
The soft key displays will appear.Available soft keys

POIs
soft key:
Brings you to the Points of Interest
(POI) menu (
page 156).

Memory
soft key:
A window appears with the
message Position Saved as
MemPt
. (page 118).

Display
soft key:
The Map View display will appear.
You can adjust the map orientation
(
page 148).

Soft key +:
Zooming in for more detailed map.

Soft key ):
Zooming out for less detailed map.
iThe system automatically places the
cross-hairs on the current destination
address.
ic was pressed:
If no soft key is selected within approx.
8 seconds, the soft key display will
disappear again.

132 NavigationDestination input
Press H, h, g, G, F, f to
move the cross-hairs.
The direction of movement of the
buttons depends on the map direction
selected (
page 148).

2D North Up, 2D Heading Up:
Press F and f to move the
cross-hairs diagonally.

Bird’s-Eye View:
Use H and h to turn the map
round the vertical axis of the cross-
hairs.
Press g or G to move your
position on the map forward or
backward.This allows you to select your destination.

Release the button.
If the system is able to assign a street
name to the selected location, it is
displayed on the status bar.
In this example:
NEWPORT
RD

Press E.
The system uses the point at the center
of the cross-hairs as destination.
Route guidance will begin.
iIf you press the
Back
soft key, your
selection will be discarded. The system
then uses the data of the previous
destination.

133 Navigation
Destination input

Activate the Navigation main menu
(page 114).

Press the
Home
soft key.
The home address is shown.

Start route guidance (
page 134).Editing home address

Press the
Change
soft key.
The Change Home Addr. menu will
appear.
You can use the following functions

selecting a destination from the
destination memory (
page 153)

entering destination address
(page 121)

selecting a destination from the last
destinations memory (
page 150)

selecting a Point of Interest
(page 157)

choosing the current position

Press g or G to select an option.

Press E.

Select the address.

Press E when the Save as home
address menu will appear.
The new home address is shown.

Start route guidance (
page 134).
Selecting home address

136 NavigationRoute guidanceImportant map symbols:
Current vehicle location and direction
of travel y
If the map orientation
2D Heading Up
(page 148) is chosen, the arrow will
always point upward.

The remaining route section is
highlighted in blue color.
Display example 2:On the right side of the display, the symbol
for the next driving maneuver is indicated
(here: right turn).
On the very right side next to turn symbol
is the distance bar. It indicates the
distance to the next driving maneuver
(here: 300 ft).
The status bar shows the name of the
street after the driving maneuver, if
available, here:
PARK AVE
The destination is marked with a flag $ on
the map, an intermediate destination is
marked with a flag showing the letter
S.
Altering the map scale
The current map scale is indicated on the
left side of the status bar.

Press any soft key.
The soft key displays appear.
iThe colored highlight only appears
when the system has completed the
route calculation.
iUsing the control system, the display
unit can be changed between km or
miles (see your vehicle’s Operator’s
Manual). 
When the display unit is set to
miles, the COMAND will indicate
distances in miles (mi) or feet (ft).

When the display unit is set to km,
the COMAND will indicate
distances in kilometers (km) or
meters (m).
iIf no other action is taken within
approx. 8 seconds, the soft key
displays will disappear again.

137 Navigation
Route guidance

Press the + or ) soft key.
The map section is zoomed in or
zoomed out. A bar indicating the map
scale appears on the status bar.
Selecting map orientation
A symbol is shown on the bottom left side
of the status bar.

2D North Up
Y:
Map is displayed facing north
or

2D Heading Up
<:
Dynamic map alignment, map is
displayed facing driving direction
pointing upYou can select the map orientation
(
page 148).
Changing the map display
While route guidance is active, you can
switch between split view and full view.

Split view:
The map is shown on the left side and
information on the next maneuver on
the right.
or

Full view:
Full view of the map

Press c.
The display changes with every push of
the button.When you reach the destination, you will
see the destination flag. Route guidance
ends.
iIf GPS display (
page 149) is active,
information on your current position is
shown on the status bar.
Arriving at destination

139 Navigation
During route guidance
During route guidance you can use the soft
keys to activate additional menus and
displays and make settings.
The soft key displays will automatically
disappear after a few seconds.
During route guidance, press any soft
key.
The soft key displays will appear.Available soft keys

Info
soft key:
Brings you to the Info menu.

St-over
soft key:
Brings you to the stopover destination
function (page 144).

Detour
soft key:
Brings you to the Traffic Jam function
(
page 142).

Memory
soft key:
Brings you to the save current location
function (page 146).

Display
soft key:
Brings you to the Display menu
(
page 146).

Soft key +:
Enlarge visible map section.

Soft key ):
Reduce visible map section.

Display the soft keys.

Press the
Info
soft key.
The Info menu will appear.
Displaying the soft keys
Info menu

During route guidance

140 NavigationDuring route guidanceAvailable soft keys
Route
soft key:
Brings you to the route display on the
map.

Mode
soft key:
Brings you to the route mode selection
menu (page 116).Displaying the route on the map

In the Info menu (
page 139), press
the
Route
soft key.
The map will appear. The route ahead
is blue-colored.
The destination is marked with a flag $
on the map, a stopover destination is
marked with a flag showing the letter
S.
Displaying the route list

In the Info menu (
page 139), press
the
Route
soft key.
The route appears on the map.

Press the
List
soft key.
The list of the remaining roads/route
sections appears.
The road currently travelled on is at the
top of the list.

Press G or g to scroll through the
list.
Use the
Page
V and
Page
v soft keys
to display the next or previous page.
iIf a stopover destination has been
entered:
The estimated time of arrival and the
remaining distance to the destination
are displayed.
When the stopover destination is
reached, the system calculates the
route to the main destination and
indicates estimated time of arrival and
remaining distance.
iDepending on the distance to the
destination, it may take some time
before the route display appears.
iDepending on the distance to the
destination, it may take a few moments
before the route list is completed.
The list will only be complete when the
route is completely calculated. This is
indicated by the word
Destination
in
front of the last list entry.