ESP MERCEDES-BENZ CL-Class 2004 C215 Comand Manual

74 AudioDVD operationChanging the camera view
During playback of the DVD, activate
the DVD settings menu (
page 71)

Press the
Angle
soft key.
A list of the available camera views will
appear.

Use g or G to select the desired
camera view.

Press E.
The selected camera view is used.

Display the soft keys (
page 67).

Press the
Brightn.
, Contr.
or
Color
soft key.

Press h or H.
The respective setting is changed.
If several movies are on the DVD, you can
select a movie directly.
Movies can be selected while the DVD is
played back or stopped.
E.g.: Select movie no. 3

Press 3.
The 3rd movie starts after a short
while.
iYou can only change the camera view if
several camera views are stored on the
DVD. The number of available
camera views depends on the DVD.
iThe
Angle
soft key cannot be selected
if the Settings menu is activated from
within the DVD menu (
page 70).
In this case, select the camera view in
the DVD menu.
Some DVDs supporting different
camera views don’t offer a switch
option. In this case, select the camera
view in the Settings menu.
Adjusting brightness, contrast and
color
Selecting a movieiMovie selection may also be possible in
the DVD menu saved on the DVD
(page 70).

82 Satellite radio*Satellite radio operationAutomatic station scan
The stations in the selected category can
be scanned in numerical order for 8 se-
conds each.
In the Satellite radio main menu, press
the
Scan
soft key.
The scan function will begin.
Scan
will
appear in black lettering.Ending scan function and playing a
station

Press the
Scan
soft key again.
The station selected will appear with
the station name.
Scan
will appear in
white lettering again.
Station selection via direct channel
entry

Press *.
Input line will appear.

Enter the number of the channel you
wish to select, e.g. 55.
The channel you have selected will be-
gin to play. The corresponding station
name will appear, if station is available.iError messages will be displayed in the
multifunction display.

91 Telephone*
Important notes

The message
Activating Telepho-
ne. Please Wait.
appears.
COMAND prepares the telephone for
use. Select other system functions, e.g.
radio, by pressing the corresponding
button or wait until the telephone is ac-
tive.

One of the two messages
Telephone

Unavailable
or
Telephone
Not
Inserted
appears.
Please connect the mobile phone.

One of the two messages
Telephone

Error
or
Telephone
Not In-
stalled
appears.
Please contact an authorized
Mercedes-Benz Center.GSM mobile phone

If the message
Check SIM Card
(Emergency Call “911” Only
Possible With Tel.)
:

Insert the SIM card into the mobile
phone (Telephone Operating
Manual).

93 Telephone*
Telephone operation
You can make an emergency call to an
emergency rescue station with a mobile
communication network.
The emergency call will be placed as long
as the corresponding mobile communicati-
on network is available. To do this, switch
the telephone on if you have not already
done so.

TDMA/CDMA mobile phone
The emergency call will also be placed
if the phone is locked (
page 94).

GSM mobile phone
If no SIM card is in the phone or SIM
PIN is not entered, you can only make
an emergency call at the mobile phone.
Emergency calls may not be possible with
all mobile phone networks or if certain net-
work services and/or telephone functions
are active. Check with your local network
operating company.
If you cannot make an emergency call, you
must initiate rescue measures yourself.
Emergency call “911”iThis function places a call to the local
911 provider. It does not initiate a
Tele Aid* call.
Warning
G
The 911 emergency call system is a public
service. Using it without due cause is a cri-
minal offense.

101 Telephone*
Telephone operation
Selecting an entry from the answered
calls list
The COMAND automatically generates a
list of the last 10 calls received. The list is
sorted chronologically with the most
recently received call at the top of the list.
Displaying the list
In the
Dialed
numbers list
(
page 100), press h until
Answered
calls list appears.
The list is displayed and the most
recently dialed number is highlighted. The status bar shows:

the caller’s name if her or his name and
number are stored in the phone book

the message
Unknown
Name
if no entry
is available

the telephone numberYou can select the following functions:

Changing list display (
page 100)

Selecting an entry and begin dialing
(page 100)

Ending a call (
page 99)
Missed calls
If there are one or more missed calls avai-
lable on the mobile phone, a correspon-
ding message will appear.

Press the
Back
soft key to return to the
Telephone menu.

112 NavigationImportant notesIf your vehicle has been transported (e.g.
by a car, train or ferry) the system may
make navigation announcements which do
not correspond to the vehicle’s position.
The system needs to redetermine its
position.
Determining the location after the
vehicle has been transported
The system will need some time to
determine its location after the car has
been transported. The time required for
the system to do so varies from case to
case.

Switch the COMAND on.

Activate the Navigation main menu
(page 114).
The navigation DVD needs to be in the
navigation computer (
page 111).

Drive and press c.
The display will change to the map
display.
Drive until the position or the road
indicated correspond to the real
circumstances. The system is now
correctly adjusted.
Route guidance after the vehicle has
been transported

125 Navigation
Destination input
Entering a street
The system will display one of the following
menus after you have entered the city:
In the case of cities with more than 15
streets: Enter Street menu
(page 125).

In the case of cities with up to 15
streets: Select Street menu
(page 126)

If no streets are available for the
destination: Select CityCtr list
(page 124)
The respective menu is indicated on the
status bar.
In addition to the street selection, you can
use the following soft keys to determine
your destination:

Map
soft key:
Brings you to the destination input
directly above the map (
page 131).

CityCtr
soft key:
Brings you to the district (center)
selection (page 124).

POIs
soft key:
Brings you to the Points of Interest
selection menu (
page 155).

Press h, H, g and G to select
the characters. After each selection,
press E.
Press F and f to select characters
diagonally.
or

Press one of the number keys 2 to
9 as often as needed.

Press the
Delete
soft key if
necessary.
The character last entered or the
character last accepted by the system
is deleted.
iFor quicker input, COMAND offers
available characters from the character
set based on your selections and the
names of the streets stored on the
navigation DVD. The character
selected appears magnified. The
system will accept the entry if the input
matches the name of a street stored on
the navigation DVD. iDo not confuse the Delete soft key
(deletion of the last character) with the
Back soft key (deletion of the complete
entry).

165 Service
SMS (Mail)
With the SMS Inbox Folder you can receive
SMS messages provided that SMS
messaging is available from your mobile
phone service provider.

Activate the Service main menu
(page 164).

Press the
SMS
soft key.
The Inbox will appear.If the message
Empty
appears, there
are no SMS messages.
Otherwise the Inbox is sorted in
chronological order, the most recent
message is at the top of the list. The
status bar shows date and time of the
message.
One line is provided for each message.
Symbol = = Message unread
Symbol z = SMS message
iThe functions described here apply if
your vehicle is equipped with mobile
phone cradle* and a Mercedes-Benz
specified mobile phone*.iIf you have received new SMS
messages, n is displayed on the
status bar. Additionally, a message
received tone is played.
iIf the SMS memory is full, N is
displayed on the status bar.
Additionally, a message is displayed
when you open the respective folder.iIf another system is active (e.g. radio),
a window appears when SMS mail is
coming in.SMS Inbox

SMS (Mail)

173 Service
Address book
Adding a note
You can add a note to an address book
entry.
Activate the detail view (
page 171)
of the desired address book entry.

Press the
Note
soft key.

Enter the data using the 12-keys
keyboard (1 - #) or the selection
menu, then finish data input.Spoken name for an address book entry
If your car is equipped with the Voice
control system*, you can

add a spoken name to the address
book entry

play back the spoken name

delete a spoken name
Using the Voice control system*, you can
then have a number dialed by saying the
corresponding name (refer to Voice
control System Operation Guide).Adding

Activate the detail view (
page 171)
of the desired address book entry.

Press the
New
soft key.
The system asks you to speak the
name twice.

Speak the name after each request.
After the second time the name is
stored.iYou cannot add a spoken name to a
mobile phone internal memory entry in
the address book.

186 ServiceNotebookThe recorded notes can be scanned one
after the other for 8 seconds each.
Press the
Scan
soft key.
Starting from the position of the
marking in the Notebook menu, the
first note found is played back.
Stopping intro scan

Press E.
The intro scan stops at the current
position and plays the corresponding
note.Ending intro scan
The intro scan ends automatically after the
intro of the last spoken note is completed.
The Notebook menu is displayed and the
first note is marked.
or

Press the
Scan
soft key again.
The Notebook menu is displayed and
the note currently playing is marked.

Activate the Notebook menu
(page 182).

Press G or g to select an entry.

Press the
Remind.
soft key.
Message
No Reminder
No reminder is set for the note.The reminder is displayed with time
and date:
The reminder is set for the note.

Press the
Set
soft key.
You can set a reminder or change an
existing one.

Press H or h to select day,
month, year, hour and minute.
Playing intros of all recorded notes
(Scan)
Entering a reminder