display MERCEDES-BENZ CL-Class 2004 C215 Comand Manual

95 Telephone*
Telephone operation
Entering the unlock code
Use the number keys 1 through 0
to enter the four-digit unlock code.
Asterisks instead of digits will appear in
the input line.

Press the
OK
soft key.
If entered code is correct and the pho-
ne is registered in a network, the phone
is ready for use.GSM mobile phone
Entering the PIN code

Enter the four-digit PIN code on the
mobile phone. Refer to the mobile pho-
ne operator’s manual on how to do this.
If no SIM card is in the telephone, the
message
Check
SIM
Card
appears.

Insert a SIM card. Refer to the mo-
bile phone operator’s manual.
Entry incorrect:
You will hear a warning sound.

You need to re-enter your PIN code.
Entering codes
iYour unlock code prevents unauthori-
zed persons from using your telephone.
B e s u re t o m em o ri z e t hi s c o d e , a f o u r d i -
git number, carefully.
If you enter an incorrect code, the sys-
tem returns to the menu for entering the
unlock code.iYou must always enter the unlock code
when you switch on the telephone the
first time (if phone is in locked mode). Warning
G
When in the enter lock code screen, the
emergency number 911 (default input) will
be dialed if you press “1” longer than 2 se-
conds.
The 911 emergency call system is a public
service. Using it without due cause is a cri-
minal offense.
!If the PIN is entered incorrectly three
times in a row, the SIM card will be
blocked. The message
PIN Blocked

is displayed briefly. After that the
message
Please Enter PUK on
Cell Phone
is displayed.

97 Telephone*
Telephone operation
You can use the following functions in the
telephone menu:
Entering a telephone number
(page 98)

Use the redial function (
page 99)

Displaying the dialed numbers list
(page 100)

Displaying the answered calls list
(page 101)

Use speed-dialing (
page 102)

Use quick-dialing (
page 102)

Displaying the phone book
(page 104)

Adjusting balance/fader settings
(page 25)The system detects an incoming call, the
phone rings.
Incoming calls are indicated in a window in
any system (e.g. radio).
The window shows:

the caller’s number if it is transmitted
or

the caller’s name if her or his name and
number are saved in the phone book.Accepting a call

Press k.
or

Press E.
The display will change to the
call menu (
page 102). An active
audio source will be muted. You talk
over the hands-free set.
Rejecting a call

Press K.
or

Press H to highlight
Reject
and
than press E.
Incoming call

99 Telephone*
Telephone operation
Begin dialing
When you have entered the telephone
number, press k to confirm your
input.
or

In the Telephone menu, press the
Send

soft key.
or

Press E.Dialing will begin. If a name is associa-
ted with the phone number saved in the
phone book, the name appears on the
screen. In the status bar, the off-hook
symbol will appear.
COMAND will mute an active audio
source. If the person called answers
the call, the call is active. You talk over
the hands-free set.
Ending a call

Press K.
or

Press the
End
soft key.Subsequent dialing
Transmitting other dial tones:

During a call you can press the number
keys 1 through 0, # and *.
Redial

Press k twice.
The telephone dials the number that
was dialed last.iIf you press k just once, the dialed
numbers list is displayed (
page 100).

100 Telephone*Telephone operationSelecting an entry from the dialed
numbers list
The COMAND automatically generates a
list of the last 10 numbers dialed. The list
is sorted chronologically with the most
recently dialed number at the top of the
list.
Displaying the list
In the Telephone menu (
page 96),
press the
Redial
soft key.
or

In the Telephone menu (
page 96),
press the
Calls
soft key.
The list is displayed and the most
recently dialed number is highlighted. The status bar shows:

the caller’s name if her or his name and
number are stored in the phone book

the message
Unknown
Name
if no entry
is available
You can select the following functions:

Changing the list display

Selecting an entry and begin dialing

Ending a call (
page 99)Changing the list display

Press the
ABC
soft key.
The display changes to names.
or

Press the
123
soft key.
The display changes to numbers.
Selecting an entry and begin dialing

Use g or G to select the desired
entry.

Press k.
or

Press E.
The telephone dials the number.

101 Telephone*
Telephone operation
Selecting an entry from the answered
calls list
The COMAND automatically generates a
list of the last 10 calls received. The list is
sorted chronologically with the most
recently received call at the top of the list.
Displaying the list
In the
Dialed
numbers list
(
page 100), press h until
Answered
calls list appears.
The list is displayed and the most
recently dialed number is highlighted. The status bar shows:

the caller’s name if her or his name and
number are stored in the phone book

the message
Unknown
Name
if no entry
is available

the telephone numberYou can select the following functions:

Changing list display (
page 100)

Selecting an entry and begin dialing
(page 100)

Ending a call (
page 99)
Missed calls
If there are one or more missed calls avai-
lable on the mobile phone, a correspon-
ding message will appear.

Press the
Back
soft key to return to the
Telephone menu.

102 Telephone*Telephone operationSpeed-dialing
For all memory locations
At the mobile phone you can save
telephone numbers in the speed-dialing
memory and use them. Refer to the mobile
phone operator’s manual.
You can also use speed-dialing at the
COMAND (only mobile phone memory
locations 1-500).
You can enter up to 3 digits.
Open the Telephone menu
(page 96).
Memory locations with up to two digits:

Use the number keys 1 to 9 to
enter the memory location number.
Memory locations with three digits:

Use the number keys 1 to 9 to
enter the memory location number
followed by the # key.

Press k.
or

Press E.
The telephone dials the saved number.
Ending a call (
page 99)
Quick-dialing
Quick dialing can be used on memory loca-
tions 1-9.

Open the Telephone menu
(page 96).

Press one of the number keys 1 - 9
longer than 2 seconds.
The telephone dials the saved number.
Ending a call (
page 99)If the person called or you answer a call,
the call is active. The call indication is
displayed.
Call menuYou talk over the hands-free set. You can
setting the volume for the hands-free
operation (
page 97).
The status bar indicates the call time.
Active call

104 Telephone*Telephone operationThe phone book contains all entries
of the internal memory of the mobile
phone (TDMA/CDMA and GSM mobile
phone)

of the address book (
page 169) if it
contains any telephone numbers
Displaying the phone book

In the Telephone menu (
page 96),
press the Z soft key.
The phone book will appear.The first entry found is at the top of the list
and highlighted. Entries marked with abbreviations have
been imported into the phone book from
the address book (
page 174).
Entries marked with symbols have been
imported into the phone book from the in-
ternal memory of the mobile phone.
Usable phone number categories:

Symbol : Cell number

Symbol : Private number

Symbol : Business number
And additional categories:

Symbol : Fax number

Symbol : Pager number

Symbol : Main number
Phone bookiCOMAND cannot read entries from SIM
card.
Phone book
entry
Status bar shows
A phone number
Unknown
Name
A name for a
phone number
The phone number
Several numbers
Several
Numbers

105 Telephone*
Telephone operation
You can select the following functions:
Changing the phone book display at
the COMAND

Selecting a phone book entry and
dialing the number (
page 105)

Entering and saving a new phone book
entry (
page 106)

Deleting a phone book entry at the
COMAND (
page 108)
Changing the phone book display

Open the phone book (
page 104).

Press the
123
soft key.
The display changes to numbers. The
status bar displays the name of the
marked entry.
or

Press the
ABC
soft key.
The display changes to names. The
status bar displays the number of the
marked entry.
Selecting a phone book entry and
dialing the number

Open the phone book (
page 104).
The list of phone book entries with
names starting with a certain letter is
displayed.
Changing the initial letters

Press H or h one or several times.
With every push of the button the
display changes to the next possible
letter. At the end of the letter list
follows the category
Other
.Category
Other
:
Here, all entries without names or with
names starting with a special character
(e.g. * or #) are put together.
Selecting an entry

Change the initial letter if required.

Use G or g to select a list entry.iIf you hold one of the buttons, scrolling
is accelerated.

106 Telephone*Telephone operationBegin dialing
Press k.
or

Press E.
If the selected entry is an address book
entry (several phone numbers): 
Use g or G to select
Home
,
Cell
or
Work
.
If the selected entry is a cell phone
entry (several phone numbers):

Use g or G to select one of the
phone number categories,
e.g. (
page 104).

Press k.
or

Press E.
The telephone dials the number.New phone book entry
You can save entries from the following
lists as phone book entries in the internal
memory of the mobile phone or in the
address book:

Dialed numbers list (
page 100)

Answered calls list (
page 101)

Select the desired entry from one of
the lists.

Press the
Save
soft key.
A selection menu appears.
Cell Phone
:
The new entry is saved in the internal
memory of the mobile phone.
Address Book
:
The new entry is saved in the address
book.

Use g or G to select
Cell Phone

or
Address Book
.

Press E.
E.g.:
Cell Phone
The Input menu will appear.iIf you select
Address Book
, a list is
displayed first. Here, you can choose
whether you wish to save the number
as
Cell
, Work
or
Home
entry. The
further proceeding is similar to the one
in the example above.

107 Telephone*
Telephone operation
Input menu
The phone number is automatically en-
tered in the
Number
input field. The
Name field is automatically marked
and shows no name or the last name
entered.Entering a name or number

Use g or G to select the name or
the number field.
You can input data:
using the selection menu

via the number keys 1 - #
Using the selection menu:

Press the
Keypad
soft key.
The selection menu appears.
Selection menu

Enter the data using the selection
menu (
page 191).
After input using the selection menu,
the input menu is displayed again. You
can select the next data field and enter
data.
Input via the number keys 1 - #:

Use buttons 1 - # to enter the data
(page 193).