stop start MERCEDES-BENZ CL-Class 2004 C215 Comand Manual

Contents
Route guidance . . . . . . . . . . . . . . . . . 134
Starting route guidance . . . . . . . . 134
Route calculation . . . . . . . . . . . . . 134
Recalculating an existing route . . 134
Voice instructions . . . . . . . . . . . . . 134
Navigation displays. . . . . . . . . . . . 135
Arriving at destination . . . . . . . . . 137
Cancelling route guidance . . . . . . 138
During route guidance . . . . . . . . . . . . 139
Displaying the soft keys . . . . . . . . 139
Info menu . . . . . . . . . . . . . . . . . . . 139
Via function (soft key via) . . . . . . . 141
Selecting a detour . . . . . . . . . . . . 142
Stopover function . . . . . . . . . . . . . 144
Saving the current location . . . . . 146
Defining route guidance displays . 146
Last destinations and
destination memory . . . . . . . . . . . . . . 150
Last destinations memory . . . . . . 150
Destination memory . . . . . . . . . . . 151POIs (Points of Interest) . . . . . . . . . . . 155
Entering POIs . . . . . . . . . . . . . . . . 155
Selecting a POI around your current
location . . . . . . . . . . . . . . . . . . . . . 156
Selecting a POI around another
location . . . . . . . . . . . . . . . . . . . . 157
Selecting a POI around a global
destination . . . . . . . . . . . . . . . . . . 158
Selecting a POI on the map . . . . . 159
Software Updates. . . . . . . . . . . . . . . . 161
Service . . . . . . . . . . . . . . . . . . . . . . . 163
Service main menu . . . . . . . . . . . . . . . 164
Activating the Service main menu 164
SMS (Mail) . . . . . . . . . . . . . . . . . . . . . 165
SMS Inbox . . . . . . . . . . . . . . . . . . 165
Reading SMS message received. . 167
Deleting an SMS message . . . . . . 168
Address book . . . . . . . . . . . . . . . . . . . 169
Activating the Address book
menu . . . . . . . . . . . . . . . . . . . . . . 169Entries in the address book . . . . . 169
Selecting an entry . . . . . . . . . . . . . 170
Sorting the address book . . . . . . . 170
Details on an address book entry . 171
Details on a mobile phone internal
memory entry . . . . . . . . . . . . . . . . 175
New address book entry . . . . . . . . 178
Deleting an address book entry . . 179
Using an address book entry
in other system modes . . . . . . . . . 180
Notebook . . . . . . . . . . . . . . . . . . . . . . 182
Activating the Notebook menu . . 182
Entries in the notebook. . . . . . . . . 182
Selecting a note . . . . . . . . . . . . . . 182
Sorting the notebook . . . . . . . . . . 183
Entering a new note . . . . . . . . . . . 183
Recording a new note . . . . . . . . . 184
Playback a note . . . . . . . . . . . . . . 185
Playing intros of all recorded
notes (Scan) . . . . . . . . . . . . . . . . . 186
Entering a reminder . . . . . . . . . . . 186
Deleting a note . . . . . . . . . . . . . . 187
Deleting a reminder . . . . . . . . . . . 188

21 At a glance
Menu system
The main area 2 shows messages and
settings.
You can change the settings by operating
the system.
The status bar 3 is divided into three
areas.
Left side:
The current operating mode is indicated. In
this example: Radio
Center:
The status of the current operating mode
or other selectable functions are indicated.
In this example:
FM
= current waveband

9
= memory location of station,
e.g. “9”Right side:
General status information is indicated
independent of the operating mode.
In this example:

Ready
= Telephone* is ready for
operation

= Reception strength of the
mobile phone
Menu functions and submenus
Using the soft keys, functions can be
switched ON or OFF, or submenus can be
called up.Example: Radio main menu:

The
FM/AM
soft key switches between
FM and AM band.

The
Scan
soft key starts/stops the
channel scan.
In some situations, soft keys may not have
any function and are not operational. A
soft key without function appears shaded
out.

35 Audio
Radio operation
FM, AM band
Entries outside the frequency range are
not possible.Automatic station scan (FM, AM)
The stations in a given waveband (FM, AM)
can be scanned one after the other for 8
seconds each.
The scan function stops automatically
when the first station received has been
scanned twice.Start scan function

Activate the desired wave band
(page 32).

Press the
Scan
soft key.
The scan function will begin.
Scan
will
appear in black lettering.
End scan function and play a station

Press the
Scan
soft key again if you
hear the desired station.
iIf you do not make another entry within
8 seconds, the function will be canceled
and you will listen to the station last tu-
ned to.
iStation scan performs two runs. During
the first run, stations with good
reception are played. During the
second run, stations with weaker
reception are played.

52 AudioCD operationIn the track list
The track list includes all tracks of the CD
currently played. Just one list entry is
visible at a time which shows the number
of the track currently played.
Press g or G.
The track list with the current, the
previous and the next track is
displayed. The previous or next track is
played.

Use g or G to select another track
from the list.
The selected track is played. With the number keypad

Activate the CD main menu
(page 47).

Press *.
An input line will appear in the main CD
menu.
E.g.: Track 3

Press 3.
E.g.: Track 12.

Press 1 and 2 in short succession.

After entering the track number, wait
approx. 3 seconds.
The selected track is played. The CD
main menu is displayed.
CD track scan
The tracks on a CD can be scanned one
after the other for 8 seconds each. The
function will switch off automatically when
the starting track is reached. You can also
manually stop the scan function.
Activating

Press the
Scan
soft key.
Scan will begin.
iEntries higher than the number of
tracks on the CD are not possible.

59 Audio
MP3-CD operation
With the number keypad
Activate the MP3-CD main menu
(page 58).

In short succession, press button *
and the number key of the desired
track, e.g. 24.

After your entry wait approx. 3
seconds.
The selected track is played. The
MP3-CD main menu will appear.Skip Track

Activate the MP3-CD main menu
(page 58).
Forward

Press
D.
The next track from the track list is
played.
Backward

Press d.
If the track has been playing for more
than approx. 10 seconds, the track is
replayed from the start. If the playing
time is shorter, the previous track is
played.MP3-CD track scan
The tracks of the current folder can be
scanned one after the other for 8 seconds
each. Subfolders are not considered.
The function will switch off automatically
when the starting is reached.
You can also manually stop the scan
search.
Starting the Scan Search

Activate the MP3-CD main menu
(page 58).

Press the
Scan
soft key.
iWhen you start the scan search, the
playback mode
Normal Sequence
(page 61) is automatically activated.

69 Audio
DVD operation
Stopping DVD playback
Display the soft keys (
page 67).

Press the
Stop
soft key.
DVD playback stops.
Restarting DVD playback

After playback has stopped, press the Play
soft key again.
The DVD is played from the start.
or

Select a movie (
page 74).Displaying full screen

During DVD playback with the soft keys
displayed press the
Full
screen
soft
key.
The soft keys disappear. The full screen
will appear.Activating DVD menu

Display the soft keys (
page 67).

Press the
Menu
soft key.
The highest level of the DVD menu is
displayed, if available (
page 70).
Activating Settings menu

Display the soft keys (
page 67).

Press the
Setting
soft key.
The DVD settings menu will appear
(
page 71).
iWhile DVD playback is stopped, you
can press the
Menu
soft key.
The DVD menu saved on the DVD is dis-
played, if available (page 70).

74 AudioDVD operationChanging the camera view
During playback of the DVD, activate
the DVD settings menu (
page 71)

Press the
Angle
soft key.
A list of the available camera views will
appear.

Use g or G to select the desired
camera view.

Press E.
The selected camera view is used.

Display the soft keys (
page 67).

Press the
Brightn.
, Contr.
or
Color
soft key.

Press h or H.
The respective setting is changed.
If several movies are on the DVD, you can
select a movie directly.
Movies can be selected while the DVD is
played back or stopped.
E.g.: Select movie no. 3

Press 3.
The 3rd movie starts after a short
while.
iYou can only change the camera view if
several camera views are stored on the
DVD. The number of available
camera views depends on the DVD.
iThe
Angle
soft key cannot be selected
if the Settings menu is activated from
within the DVD menu (
page 70).
In this case, select the camera view in
the DVD menu.
Some DVDs supporting different
camera views don’t offer a switch
option. In this case, select the camera
view in the Settings menu.
Adjusting brightness, contrast and
color
Selecting a movieiMovie selection may also be possible in
the DVD menu saved on the DVD
(page 70).

75 Audio
DVD operation
If the movie is divided into chapters or sce-
nes, you can directly jump to a chapter or
scene or skip them while the movie is
playing. Some DVDs will not allow this in
certain portions of the movie (e.g. during
screen credits, age restriction and/or pa-
rental advisories).
Selecting a scene or chapter directly
E.g.: Scene/chapter 5
While the movie is playing, press *.

Press 5.
After a short while playback starts from
the 5th chapter or the 5th scene.Scene/chapter skip

Press D or d.
Button D = Next chapter or scene
Button d = Previous chapter or
scene or beginning of scene if scene
has been playing for more than 10
seconds

Keep D or d pressed during DVD
playback.
D = fast forward
d = reverse
Release the button to stop fast
forward/reverse.
Selecting a scene/chapter
iChapter/scene selection may also be
possible in the DVD menu stored on
the DVD (
page 70).
Fast forward/reverse

135 Navigation
Route guidance
Muting current voice instructions
Press J.
The current announcement is stopped.
You will hear the next navigation
announcement normally.
Switching voice instructions On/Off
Switching off

During a navigation announcement
press J for 2 seconds.
The message
Voice Announcements
Muted
will appear briefly.
Further route guidance takes place
using only the symbols in the display.
If a new route guidance cycle is started,
the announcements are automatically
switched on again.
Switching on again

Press j.The navigation displays are only visible
while route guidance is active.
To switch to the navigation display from
another display, e.g. from CD operation:

Press b or c.
Two examples are shown below:
Display example 1:The road you are currently driving on is
shown on the status bar, in this case
I-90
.
The indication
120 mi
is the distance to
the next driving maneuver.
If the GPS position display (
page 149) is
active, the GPS data are shown instead of
the street name.
Navigation displays
iUsing the control system, the display
unit can be changed between km or
miles (see your vehicle’s Operator’s
Manual). 
When the display unit is set to
miles, the COMAND will indicate
distances in miles (mi) or feet (ft).

When the display unit is set to km,
the COMAND will indicate
distances in kilometers (km) or
meters (m).

145 Navigation
During route guidance

Press a soft key, e.g. .

Press E.
A list of restaurants near your location
is displayed.The arrows indicate the direction of the
destination. The distances indicated are
straight line distances to the destination.

Press G or g to select a destination
from the list.

Press the
Details
soft key if required.
Details on the destination are shown.

After you have selected a destination,
press E.
The Start Route Guidance menu will
appear (
page 134).

Press E.
The system calculates the route to the
selected stopover destination.
Deleting or replacing a stopover
destination

Activate the soft key display
(page 139).

Press the
St-over
soft key.
The menu for deleting or changing a
stopover destination will appear.

Use g to select
Delete Active
Stopover
.
iPrior to this, a list may be displayed in
which you can select the desired
category, e.g.
Barbecue/Southern
,
pressing G or g.
iIf no stopover destination has been
entered, the full view map appears
instead of the menu. You can now
enter a stopover destination
(page 144).