key MERCEDES-BENZ CL-Class 2005 C215 Comand Manual

198 System settingsSystem settings

System settings
Press C.

In the Service main menu, press the System
soft key.
System settings menu
In the System settings menu you can:
set date and time

switch verification and notification
tones on and off (
page 201)

adjust display settings (
page 201)

activate and deactivate the Voice
control system* help window
(page 203)

start Voice control system*
individualization (
page 203)

reset system settings (
page 204)Setting date
Activating the System settings
menu
Setting the date/time iExact settings of date, time and current
time zone allow you:
correct navigation for
routes with time-dependent traffic
guidance

correct calculation of the expected
time of arrival
iIf time/date information is transmitted
by the GPS, you cannot set the date.
A satellite symbol is displayed on the
status bar if the system uses GPS data.

199 System settings
System settings

In the System menu, press the
Time
soft key.
The Date/Time menu for setting date
and time will appear.
Country
soft key:
Can only be selected if you use the GPS.
You can select the country (
page 200).

Press H or h to select day, month
or year.

Press g or G.
Depending on the selection, you set
the day, the month or the year.

Press the
Back
soft key.
or

Press E.
The setting is saved.
Setting the time

In the System settings menu, press the Time
soft key.

Press H or h to select hours or
minutes.

Press g or G.
Depending on the selection, you set
the hour or the minute.Setting the hour:
Each time the button is pressed, the
time is adjusted in increments of
1hour.
Setting the minute:

With GPS reception:
Each time the button is pressed, the
time is adjusted in increments of
30 minutes.

Without GPS reception:
Each time the button is pressed, the
time is adjusted in increments of
1minute.

Press the
Back
soft key.
or

Press E.
The setting is saved.iTime settings are not automatically
changed to daylight saving time.
Change the clock manually.

200 System settingsSystem settingsSetting date and time format
Press the
Format
soft key.
The Format menu for selecting the time
and date display formats will appear.

Press g or G to select a format for
date and time.

Press E.
The format setting is applied.

Press the
Back
soft key.
or

Wait a few seconds.
The Date/Time menu will automatically
appear.
Selecting the country
You can only use this function if you use
the GPS.

Press the
Country
soft key.
The country list will appear.

Press g or G to select a country.
If a country has multiple time zones,
e.g. Canada and USA, you can select
the applicable time zone and, if
applicable, daylight saving time
settings.

Press E.
The settings are applied.
Option
Symbol
Format selected
_
Format not selected
-

201 System settings
System settings

In the System settings menu, press the Tones
soft key.
The Tones menu will appear.

Press G or g to select an entry.

Press E.
The respective tones are activated or
deactivated. You hear the tone when
you activate it.

Press the
Back
soft key.
or

Wait a few seconds.
The System settings menu will
reappear.

In the System settings menu, press the Display
soft key.
You can use the following functions:

adjust the display brightness

set the display dimming
characteristics
Switching verification and
notification tones on and off
Option
Symbol
Tone activated
Q
Tone deactivated
q
Making display settings

202 System settingsSystem settingsAdjusting the display brightness 
In the Display menu, press the Bright.
soft key.

Press h or H to adjust the
brightness.
or

Press the
Bright
. soft key longer than
2 seconds.
The display brightness changes
gradually.

Release the
Bright.
soft key.

Press the
Back
soft key.
or

Press E.
The brightness setting is applied.
Setting the display dimming
characteristics

In the Display menu, press the
Mode
soft key.

Press G or g to select an entry.Day ModeThe display is continuously set to
daylight design.Night ModeThe display is continuously set to night-
time design.AutomaticThe display changes depending on the
ambient light sensor in the vehicle.

Press E.
The setting is applied. The System
settings menu will appear.

203 System settings
Voice control system*

Voice control system*
If your vehicle is equipped with the Voice
control system*, a help window can be
switched ON or OFF.
In the System settings menu, press the VC Tips
soft key.
The Voice control system* menu will
appear. The status of the help window
is displayed on the status bar.
Voice control system* menu
Activating and deactivating the Voice
control system* help window
Use g or G to select menu item Help Window
.

Press E.
The display changes. The status of the
help window is displayed on the status
bar.

Press g or G to select the desired
status of the help window.

Press E.
The help window is activated or
deactivated.Voice control system* individualization
Allows you to record your personal
language pattern for the Voice control
system*.

Press g or G to select menu item Individualization
.
If available, time and date of the last
individualization session are indicated
on the status bar.

Press E.
The display changes.
Follow the instructions. For additional
information, refer to separate Voice
control system* operating
instructions.
Voice control system* functions
Option
Symbol
Activated
_
Deactivated
-
iVoice control system* individualization
is only possible while the vehicle
stands still.

204 System settingsReset function

Reset functionUse this function to reset the current
settings of the COMAND to the factory
settings.
In the System settings menu, press the Reset
soft key.
An inquiry menu will appear.If you do not wish to reset to the factory
settings

Press E and confirm with
No
.
The System settings menu will appear.
Accepting factory settings

Press H to select
Yes
and press E.
The inquiry menu Loss of Data Are
You Sure You Want to Reset?
will
appear.

Press H to select
Yes
and press E.
The message
All Data Has Been
Reset COMAND Will Now Restart
will appear.
iAll your personal data, e.g. address
book entries, SMS messages and
destination memory entries, will be
deleted.
iThe factory settings are:
Time - Atlantic Time
Verification tone - On
Notification tone - On
Display setting - Automatic

206 GlossaryRoaming
For this function, the telephone uses
the network of a contract partner.
There are home type and non- home
type systems. The Roaming indicator in
the COMAND display indicates that a
call is being made using a non-home
type system.
Service source
This includes the systems telephone*,
navigation (voice output during desti-
nation guidance) and ->Voice control
system
SMS
(S
hort M
essage S
ervice)
With this function you can receive, read
and delete short text messages (if SMS
service is provided by your carrier)Soft keys
Keys that activate different functions.
Function of key depends on the selec-
ted operating mode.
Surround
Playback method resulting in an impro-
ved spatial listening experience com-
pared to conventional stereo playback.
Tele Aid*
(Tele
matic A
larm I
dentification on D
e-
mand)
The Tele Aid system consists of three
types of response: automatic and ma-
nual emergency, roadside assistance,
and information. Tele Aid is initially ac-
tivated by completing a subscriber
agreement and placing an acquain-
tance call. Refer also to the vehicle op-
erating instructions.The Tele Aid system is operational pro-
vided that the vehicle’s battery is char-
ged, properly connected, not damaged,
and cellular and GPS coverage is avai-
lable.
Unlock code
Your unlock code prevents unauthori-
zed persons from using your telephone.
The unlock code is a number string,
which you have to enter when switch-
ing on the telephone.
Voice output
During a trip, apart from visual informa-
tions (symbol or map displays),
COMAND also provides all of the
necessary spoken route information
via voice output.

210 IndexCD operation 44
fast forward/reverse 52
general information 44
playback mode 53
switching to CD mode 46
Changing
address book entry 179
map display 142
mobile phone internal memory
entry 182
CHECK SIM CARD (EMERGENCY CALL
"911" ONLY POSSIBLE WITH TEL.) 91
COMAND
switching off 27
switching on 27
CONNECTING CALL 189
CONTINUE ROUTE GUIDANCE 118
Coordinates 137
Current vehicle location 141D
DATA HAS BEEN SAVED 172, 174, 175
DEACTIVATING TELEPHONE 92
Deleting
address book entry 186
phone book entry 108
SMS message 175
Destination input 124
Destination memory 156
Details
on a mobile phone internal memory
entry 182
on an address book entry 178
Dialing
subsequent dialing 99
Displaying
phone book 104
route list 145
route on the map 145
subtitles (DVD operation) 73DVD
loading
into the CD/DVD drive 65
DVD operation
DVD playback requirements 64
general information 63
E
Ejecting
CD 47
DVD 66
MP3-CD 57
Emergency call "911" 93
Emergency call system 189
Ending
call 98, 99
ENTER PIN 90
ENTER UNLOCK CODE 90
Entering
data 193
via 12-button keypad 195
via selection menu 193

211 Index
destination address 125
house number 132
intersection 131
name or number in the phone
book 107
parking 133
PIN code 95
PUK 96
street 129
telephone number 98
ENTRY IMPORTED TO ADDRESS
BOOK 183
ERROR OCCURED WHILE SAVING
DATA 173, 174
Exporting
address book entry 181
F
Fader 29, 121
Frequency band 38
Frequency range 38G
GPS 115
H
Hands-free microphone
switching on/off 103
I
Important notes
Telephone 88
Importing
mobile phone internal memory
entry 183
Incoming call 97
L
Loading
CD
into the CD changer* 47
into the CD/DVD drive 47
DVD
into the CD/DVD drive 65
MP3-CD 56
into the CD/DVD drive 56Loading/ejecting
navigation DVD 115
M
Making
display settings 201
Map orientation
2D Heading Up 142
2D North Up 142
Memory
destination memory 156
last destinations 155
Memory functions
radio operation 40
Menu
functions 25
main area 24
soft key sections 24
status bar 24
Menu display 24
Menu system 24