key MERCEDES-BENZ CL-Class 2005 C215 Comand Manual

48 AudioCD operationRemoving the magazine:
Slide the cover of the CD changer*
open.

Press the green l button on the
CD changer*.
The magazine will slide out.
Inserting CDs into the magazine:

Pull the disk tray forward until it stops.

Remove any previously inserted CD.

Place a CD in the tray. The CD should
be inserted with the label side up.

Push the CD tray into the magazine
completely.

Repeat these four steps to load more
CDs into the magazine.
Reading the magazine in:

Slide the magazine into the CD changer
until it clicks into place (listen for the
click).
The CD changer* reads the magazine.
The message
Magazine Scan
Please Wait will appear.

Slide the cover of the CD changer*
closed.CD drive

Activate the Audio menu (
page 34).

Press the
CD
soft key
.
The CD main menu is displayed.
If no audio CD has been inserted, the
message
No CD
appears.

Load an audio CD into the CD drive
(page 47).
CD changer*

Activate the Audio menu (
page 34).

Press the
CD
soft key
.
The CD changer* main menu will
appear.
The CD last played begins to play.
iYou can also slide out the magazine if
COMAND is switched off.
However, the l button will not
function If the battery is not connected
or drained.
iWhen you push the magazine in, the
arrow on the upper side of the
magazine must point in the direction of
the CD changer*.
Switching on

49 Audio
CD operation
CD changer* main menu

If the last played CD is not available, the
next available audio CD is played back.No magazine in the CD changer*:
The message
No Magazine
will appear.

Load audio CDs into the CD changer*
(page 47).
No CD in the magazine:
The message
Magazine Empty
will
appear.

Load audio CDs into the CD changer*
(page 47).
You can select a CD:

in the CD list (
page 49)

with the number keypad (
page 50)

in the Magazine menu (
page 50)In the CD list
The CD list includes all loaded CDs. Only
one list entry is visible at a time.
The entry is displayed above the track
indication. It shows the number or the
name of the CD currently playing.

Use h or H to select another CD
from the list.
After the CD is loaded, it is played
back.
or

Do not change the selection.
Playback of the last played CD is
continued.
iThe name of the CD and the track
played are displayed if the information
is available.
Selecting a CD (CD changer* only)
iSelection is possible if the
CD changer* has loaded the magazine
and at least two audio CDs are loaded.

50 AudioCD operationWith the number keypad
Press a number key, e.g. 2 to select
the corresponding CD.
The CD is changed. The selected CD is
played back.In the Magazine menu

Press the
CD-Mag
soft key.
The Magazine menu is displayed. If the
magazine has not been read in, the
message
Magazine Scan
Please Wait
is displayed first.

Use g or G to select a CD.

Press E.
or

Press one of the number keys 1 to
6.
The CD is changed.
You can select a track:

with g or h (
page 51)

in the track list (
page 51)

with the number keypad (
page 51)

with CD track scan (
page 52)
iThe number keys 1 - 6 can be used
for direct selection.
Keys 1 - 6correspond with
magazine slots 1 to 6
of the CD changer*
Track select

51 Audio
CD operation
With g or h
Activate the CD main menu
(page 46).
Next track

Press h.
The next track is played.
Previous track or start of title (if more
than 10 seconds of playing time has
elapsed)

Press g.
Playback begins.
Select any desired track

Press g or h as often as
necessary.In the track list
The track list includes all tracks of the CD
currently played. Just one list entry is
visible at a time which shows the number
of the track currently played.

Press g or G.
The track list with the current, the
previous and the next track is
displayed. The previous or next track is
played.

Use g or G to select another track
from the list.
The selected track is played. With the number keypad

Activate the CD main menu
(page 46).

Press *.
An input line will appear in the main CD
menu.
E.g.: Track 3

Press 3.
E.g.: Track 12.

Press 1 and 2 in short succession.

52 AudioCD operation
After entering the track number, wait
approx. 3 seconds.
The selected track is played. The CD
main menu is displayed.
CD track scan
The tracks on a CD can be scanned one
after the other for 8 seconds each. The
function will switch off automatically when
the starting track is reached. You can also
manually stop the scan function.
Activating

Press the
Scan
soft key.
Scan will begin.Ending the function
Scan search is running.

Press the
Scan
soft key.
or

Press E.
Playback will resume with the desired
track.

Activate the CD main menu
(page 46).
Fast forward

Press h longer than 2 seconds and
keep it pressed.
Fast reverse

Press g longer than 2 seconds and
keep it pressed.
Ending the function

Release h or g.
Playback will resume.
iEntries higher than the number of
tracks on the CD are not possible.
iWhen you start the scan function, the
playback mode
Normal
Sequence

(
page 54) is automatically activated.
Fast forward/reverse

53 Audio
CD operation
On
Press J during playback.
The CD operation is muted and theß
symbol is displayed on the status bar.
Off

Press J again.
Playback will resume.
The ß disappears from the status bar.The following options are available:

Normal Sequence (
page 54)

Track Mix (
page 54)

CD Mix (
page 54)

Repeat Track (
page 54)

Repeat CD (
page 54)
Activating playback mode
E.g.:
Mode
Repeat
Track


Press the
Setting
soft key.
The setting menu will appear.
CD changer* setting menu
Use g or G to select the playback
mode
Repeat Track
.

Press E.
The mode is activated. Wait a few
seconds for the CD changer* main
menu to appear. The activated mode is
displayed on the status bar (except Normal Sequence
).
MutingiCOMAND will also deactivate muting if
you
select another audio source (e.g.
radio)

change the volume

press either g or h.
Playback modeiIf the CD changer* is connected, the
playback modes
Repeat CD
and
CD Mix
are also available.

57 Audio
MP3-CD operation

Insert an MP3-CD into the slot. The
printed side of the MP3-CD must face
upward.
The COMAND pulls the CD into the
drive. The message
Loading Medium
Please Wait
will appear.
After that the MP3-CD main menu
(
page 57) will appear. Playback
begins.Ejecting an MP3-CD

With the COMAND switched on, press
l.
The display moves up and the system
ejects the MP3-CD already loaded.

Remove the MP3-CD from the slot.

Insert another MP3-CD into the slot.
or

Press l again to close the slot if you
do not wish to insert another MP3-CD.

Activate the Audio menu (
page 34).

Press the
MP3-CD
soft key
.
or
Load a MP3-CD (
page 56).
The MP3-CD main menu will appear.
MP3-CD main menu1Current track/number of tracks on the
current MP3-CD
2Elapsed playback time of the current
track
iA CD already loaded must be ejected
before inserting a new CD. Inserting a
second CD with another CD still loaded
will cause damage to the CD drive
which is not covered by the Mercedes-
Benz Limited Warranty. iIf you do not insert the MP3-CD into the
slot within around 15 seconds, the
COMAND will close the slot.
iIf you do not remove the MP3-CD from
the slot within around 15 seconds, the
COMAND will pull the MP3-CD into the
drive again and close the slot.
MP3-CD main menu

58 AudioMP3-CD operationThe first line shows the name of the
current folder. At the center you see the
currently played track.
Activate the MP3-CD main menu.
(page 57).

Use H or h to select a folder.
The track list only displays the tracks of
the selected folder.
Playback of the first track of the
selected folder will begin.
You can select a track:

in the track list (
page 58)

with the number keypad (
page 58)

with g or h (
page 59)

with MP3-CD track scan (
page 59)In the track list
The track list includes all tracks of the
selected folder of the currently played
MP3-CD. Only one list entry is visible at a
time.

Open the MP3-CD main menu
(page 57).

Press G or g.
The track list is displayed. You will see
up to 3 entries. The track shown in
black is the one currently playing.

Press G.
You move forward through the track
list.

Press g.
You move backward through the track
list.With the number keypad

Activate the MP3-CD main menu
(page 57).

In short succession, press button *
and the number key of the desired
track, e.g. 24.

After your entry wait approx. 3
seconds.
The selected track is played. The
MP3-CD main menu will appear.
Selecting a folderSelecting a track
iIf the current folder contains less
tracks, the system will only recognize
the first digit entered and play the ap-
propriate track.

59 Audio
MP3-CD operation
Skip Track
Activate the MP3-CD main menu
(page 57).
Forward

Press
D.
The next track from the track list is
played.
Backward

Press d.
If the track has been playing for more
than approx. 10 seconds, the track is
replayed from the start. If the playing
time is shorter, the previous track is
played.MP3-CD track scan
The tracks of the current folder can be
scanned one after the other for 8 seconds
each. Subfolders are not considered.
The function will switch off automatically
when the starting is reached.
You can also manually stop the scan
search.
Starting the Scan Search

Activate the MP3-CD main menu
(page 57).

Press the
Scan
soft key.Ending the scan function
Scan search is running.

Press the
Scan
soft key.
or

Press E.
The last scanned track is played back.
iWhen you start the scan search, the
playback mode
Normal
Sequence
(page 60) is automatically activated.

60 AudioMP3-CD operationThe following options are available:
Normal Sequence (
page 60)

Folder Mix (
page 61)

CD-ROM Mix (
page 61)

Repeat Track (
page 61)

Repeat Folder (
page 61)
Activating playback mode
E.g.:
Option
Normal Sequence

Press the
Setting
soft key.
The Settings menu is displayed.

Use g or G to select the playback
mode
Normal Sequence
.

Press E.
The option is activated. Wait a few
seconds for the MP3-CD main menu to
appear.Explanation of the Playback Options

Normal SequenceThe tracks of the current folder are
played in alphabetical order.
If the current folder contains sub-
folders:
The sub-folders and their tracks are
played in alphabetical order.
The current folder does not contain
sub-folders:
The track of the folder next in the
alphabet is played back.
Playback modeOption
Symbol
Function active
_
Function not active
-
iAfter selection, the following playback
options are displayed on the status bar.