light MERCEDES-BENZ CL-Class 2005 C215 Comand Manual

8 IntroductionSymbols

SymbolsYou will find the following symbols in these
operating instructions:
* The asterisk identifies optional
equipment. Since not all models
have the same standard equip-
ment, your COMAND system equip-
ment may deviate from some
descriptions and illustrations.

This symbol points to instructions for
you to follow.

A number of these symbols appearing
in succession indicates a multiple-step
procedure.
The continuation symbol
marks an interrupted proce-
dure which will be continued
on the next page.
(
page 9) This symbol tells you where
to look for further infor-
mation on this subject.
-> This symbol is used in the
glossary. It indicates that
the term immediately follo-
wing the symbol is also exp-
lained in the glossary.
Display
Messages, menu items or
soft key names appearing in
the COMAND color display
are printed in the type
shown here.
Warning
G
Warning notices draw your attention to ha-
zards that may endanger your health or life,
or the health or life of others.!Highlights hazards that may result in
damage to your COMAND.iHelpful hints or further information you
may find useful.


40 AudioRadio operationYou can use the following functions:
Saving stations manually (FM, AM)

Saving stations automatically FM, AM
(page 41)

Selecting a station from the FM/AM
Preset menu (
page 42)

Selecting a station from the FM/AM
Auto presets (
page 43)Saving stations manually (FM, AM)
In the Radio main menu

Activate the desired waveband
(page 36).

Press one of the number keys, e.g. 2,
longer than 2 seconds.
You will hear a confirmation beep if the
beep tones option was activated in the
system settings (
page 201).
The radio saves the current station at
the memory preset selected. The me-
mory preset selected will appear in the
status line, e.g. “FM2”.On the memory list

Activate the desired waveband
(page 36).

Press the
Presets
soft key.
The memory Preset menu will appear.

Use H, h or g, G to highlight
the desired memory preset.

Press E
longer than 2 seconds.
The current station will be saved at the
memory preset selected.
You will hear a confirmation beep if the
beep tones option was activated in the
system settings (
page 201).
Memory functions
iThere are 10 presets available (1 -
9, 0).
An existing entry is overwritten in the
memory list when a new input is given.

42 AudioRadio operationSelecting a station from the preset
menu (FM, AM)
Activate the FM or AM memory
(page 40).
You can use one of the following two ways
to select a station from the FM/AM
presets

Press the corresponding number key,
e.g. 3, to select the desired station.
or

Use H, h or g, G to highlight a
memory preset in the FM/AM preset
list.

Press E.
In both cases, you will see the Radio
main menu
automatically after 8 seconds

if you press the
Back
soft key.
The Radio main menu indicating the
memory preset number appears.

43 Audio
Radio operation
Selecting a station from the FM/AM
autostore presets
Activate the FM or AM autostore pre-
sets (
page 41).

Use H, h or g, G to highlight a
memory position.

Press E.
You will see the Radio main menu
automatically after 8 seconds

if you press the
Back
soft key.

45 Audio
CD operation

Only touch the CD on the edge.

Avoid touching the CD surface with
your fingers.

Clean the CD with a dry, lint-free cloth.
Wipe them from the inside to the outer
edge. Never wipe the CD in a circular
motion.

Do not use rubbing alcohol or solvents
to clean the CDs.

Do not expose the CDs to heat or direct
sunlight.

Do not write or put stickers on CD.Tips on caring for your CDs

46 AudioCD operationPlayback locations for audio CDs are:
the CD drive in the COMAND

the CD changer*.
Differences regarding the CD mode depen-
ding on the audio source are highlighted.

In the Audio menu (
page 34), press
the
CD
soft key (for CD drive) or
the
CD
soft key (for CD changer*).
CD changer* main menu1CD changer*
CD
or CD drive
CD
2Current track/number of tracks on the
current CD
3Elapsed playback time of the current
track
CD drive
CD changer*
Switching to CD operation
iThe
CD-Mag
soft key is only assigned
when the CD changer* is active.
The
Sound
soft key appears if the
COMAND is provided with sound
functions* (page 31).
iThe CD drive in the COMAND can
playback audio CDs, MP3-CDs
(page 55). The slot of the drive is
behind the display.
iThe CD changer* can accomodate up
to 6 audio CDs. It is located on the left-
hand side in the trunk.
Loading CDsWarning
G
In order to avoid distraction which could
lead to an accident, the driver should insert
CDs with the vehicle at a standstill and
operate the audio system only if permitted
by road, weather and traffic conditions.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car covers a
distance of 44 feet (approximately 14 m)
every second. iThe COMAND may be unable to
playback audio CDs provided with copy
protection.

56 AudioMP3-CD operation
Treat MP3-CDs with care to prevent
malfunctions during playback.

Do not scratch, touch or soil your
MP3- CDs.

Do not attach labels to or write on your
MP3-CDs.

From time to time, clean your MP3-CDs
with a commercially available cleaning
cloth. Never wipe circularly, but in a
straight line from inside to outside.

After use, put your MP3-CDs into the
CD box.

Protect your MP3-CDs from high
temperatures and direct sunlight.

Activate the MP3-CD main menu
(page 57).
or

Load an MP3-CD into the COMAND
(page 56).
CD drive
Loading an MP3-CD

With the COMAND switched on, press
l.
The display moves up and the CD/DVD
slot is visible.
Tips on caring for your MP3-CDs
Switching to MP3-CD operationiThe MP3-CDs are played in the same
drive as normal audio CDs.
The MP3-CD drive is behind the
display.Warning
G
In order to avoid distraction which could
lead to an accident, the driver should insert
CDs with the vehicle at a standstill and
operate the audio system only if permitted
by road, weather and traffic conditions.
Warning
G
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car covers a
distance of 44 feet (approximately 14 m)
every second.

64 AudioDVD operation
From time to time, clean your DVDs
with a commercially available cleaning
cloth. Never wipe circularly, but in a
straight line from inside to outside.

After use, put your DVDs into the DVD
box.

Protect your DVDs from high
temperatures and direct sunlight.

Load a video DVD into the COMAND
(page 65).
or

If a DVD is already loaded, open the Au-
dio menu (
page 34) and press the
DVD
soft key.
If the video DVD meets the playback re-
quirements, playback will begin. If avai-
lable, the DVD menu (
page 70) saved
on the DVD will appear.
DVD playback requirementsiVendors may offer DVDs which do not
comply with the standards.
Sound, picture and other playback
problems may occur when you play
such DVDs.
The COMAND can playback video
DVDs meeting the following
requirements:
Regional code is set (factory
setting)

NTSC or PAL TV standard
The appropriate information is usually
given either on the DVD or the DVD
box. The factory setting of the
COMAND is regional code 1. The
setting can be changed at an
authorized Mercedes-Benz Center. This
will allow you to playback video DVDs
with other regional codes, as long as
they comply with the NTSC or PAL TV
standard.
iThe COMAND system is capable of
playing DVDs. However, in order to
avoid driver distraction, the video
function is disabled and no images will
be shown on the COMAND screen.Switching to DVD operation

84 Satellite radio*Satellite radio operationSelecting a station on the memory list
In the Satellite radio main menu, press
the
Presets
soft key.
The SAT preset memory will appear.

Use g or G to highlight a memory
preset.

Press E.
The Satellite radio main menu will then
appear automatically after 8 seconds,
indicating the memory preset number
in the status line.

In the Satellite radio main menu, press
the
Info
soft key.
The information display will appear.
You will see (if available)

the full station name

additional program information

Press the
Back
soft key to switch back
to the Satellite radio main menu.
Displaying information

97 Telephone*
Telephone operation
You can use the following functions in the
telephone menu:
Entering a telephone number
(page 98)

Use the redial function (
page 99)

Displaying the dialed numbers list
(page 100)

Displaying the received calls list
(page 101)

Use speed-dialing (
page 102)

Use quick-dialing (
page 102)

Displaying the phone book
(page 104)

Adjusting balance/fader settings
(page 29)The system detects an incoming call, the
phone rings.
Incoming calls are indicated in a window in
any system (e.g. radio).
The window shows:

the caller’s number if it is transmitted
or

the caller’s name if her or his name and
number are saved in the phone book.Accepting a call

Press k.
or

Press E.
The window disappears and the display
will change to the call menu
(page 102). An active audio source
will be muted. You talk over the hands-
free set.
Muting the ringing tone

Press K.
or

Press H to highlight
Reject
and
than press E.
The window disappears. The last active
audio source is audible.
Incoming call