ECU MERCEDES-BENZ CL COUPE 2006 Owner's Manual

131
COM
AND
CO MAND navigati onsystem *(introduct ion) Up
datin gprocess
After you have load ed the DVD, yo uwi ll
see a message to the effec tth at thed isc
do es not conta inare co gn isa bleau dio/
vi de o forma t.
6 Toconfirm the mess age:press n.
CO MA ND check swhether the map
so ftwa reon the DVD is compat iblewith
th eve hicl e’snavi gatio nsyste mand
wh ethe rit is compat ible with th e cur-
re nt syste msoftw are.
If map sof twareis not compati blewith
th enavigati onsystem:
Yo u will seeame ssag et hat the update is
not po ssible.
6 Toconfirm the mess age:press n.
COMAND ejects the DVD.
6 Take the DVD out of slot 1 .
6 Load a DVD which is co mpat iblewith
th eve hicl e’snavi gatio nsyste m. If ma
psoftw areis no tcompat ible with
th ecu rren tsyst emsoftware:
You will see a messag eth at the syst em
so ftware and th emapsoftware arenot
compati ble.
6 Toconfirm themessag e:pre ssn.
COMAND ejects the DVD.
6 Take the DVD out of slot 1 .
6 Hav eth esyst emsoftwa reupdated at a
Me rced es-B enz Servi ceCentre.
i Themap sof tware cannot be upda ted until
th es ystems oftwa rehas been updat ed.
If ma psoftw areis co mp atible with the
na vigat ionsyst emand the cur rent
system softwar e:
CO MA ND checks wh ethe rth ema p da taon
th eDVD isalready in stalled. If map da
taisalrea dyinstal led:
You will seea me ssag eth at the map da ta
is al ready installed and aprompt will ap-
pear asking yo uwh ether you wish to co n-
tinue with the update.
6 Select "Yes"or "No" .
If you select "No" COMA ND autom ati-
ca lly eje ctsthe DVD and the mapdata
is not up dated.
6 Take the DVD out of slot 1 .
If you select "Yes" the exi sting map
da ta isstor ed again.
If map da taisno tin stal led ye t:
Yo uwi llse ea co mpa riso n of theversion
statuses in the display and a prom ptwill
ap pear asking wheth eryou wish to conti n-
ue with the update.
6 Select "Yes"or "No" .
If you select "No" COMA ND autom ati-
ca lly eje ctsthe DVD and the mapdata
is not up dated. 216_R
E_2006-12a.book Seit e131 Montag, 2. Oktob er2006 12:06 12

138 COM
AND
COM AND navigat ionsystem* (introducti on)Ad
just ingthe mapsc ale
i It is only possible toadj ust thema psc ale
wit hthe menusystem hidden (full-screen map
display).
6 Turn ymz untilth ede sire dscale isse t.
As soon asyout urnym z, the map
scale 4appe ars. Tu rningclockwise
enla rges the map,turni nganti-c lo ck-
wi se reduce sit. 1
Curre ntly se tmap scale as a number,
he re 100 m(1cm on the maprepre-
se nts10 0m on the gro und)
2 Curre ntly se tmap scaleasi ndicat ed by
the needle onthe sc aleb ar
3 Prev iously setsc ale befo recallin gup
cu rren tsc ale
4 Scale bar
Sto ring the current vehic lepos itio n as
a des tina tion inthe li stof previous de
stinations
6 Ifne cessary, disp laythe menu sys-
tem: press n.
6 Tostore: select "Position" "Sa vepo-
sition" .
CO MA ND stor es thecu rre ntvehicle
po sition as a destination in thelis tof
previou sdesti nation s (
=pa ge 185). Movin
gthe map
i Itis only pos sible tomo vethem apwith the
me nusystem hidden.
In certain count ries ,it is not pos sible tomo ve
th e map freely ifth eve hicle is travelling at more
th an approximat ely 5 km /h.As soon as thev e-
hi cle speed drops below about 3 km/h,itis pos-
sibl etomo vethema p freely agai n.
6 Slide qm r,o m por wm x
A crosshair appears on the map.
1 Cros shair
2 Details of the cros shair pos ition
3 Map sc ale selec ted
P6
8.20-5112 -31 P6
8.20-5053 -31 216_R
E_2006-12a.book Seit e138 Montag, 2. Oktob er2006 12:06 12

140 COM
AND
COM AND navigat ionsystem* (introducti on)
6 To se tthe map orienta tion: select
"Na vi" "Na vi" "Map display" .
Th ema pdispl aylist appears. A Rdot
indicates thecu rre ntsett ing.
6 Select "Northup" or"Heading up".
6 To exit the menu: slide om p.
The map ori entati on cha nges acc ord-
ingly. Setting
special desti nation icons
Yo uca nset the specia ldestina tions you
wi sh tohave displayed as ic ons onthe
ma p.Special destinatio nsare, for ex am-
ple, filling stati ons, hotels, cine ma sand
resta uran ts.
Th ef ollowi ng settings arep ossibl e:
! "Standar dsymb ols" (ico n disp laydeter-
mi ned by the factory settings)
! "Personal symbols" (youcan determ ine
the icons yourself)
! "No symbol s" 6
To adj ust:select "Navi" "Navi" 
"M ap display" .
The map disp laylist appears. A Rdot
ind icat es the curre ntsetting.
6 Select "St andar dsym bols" or"Per sonal
symbols" or"No symb ols" .
If yo uha ve sele cted "Per sonal sym-
bo ls" ,the list ofspec ialdes tina tions
ap pears.
6 To switc hthe icon display for a
sp ecial des tina tion on or of f:se-
le ct the requi red special dest ina-
tion.
Th iswillsh ow theicons if their dis-
play was pre viou sly switc hed of f,
an dhide th emifth eirdi splay was
previo usly sw itchedon. If a tickis
sh own, this indi cates tha tthe dis-
pl ay issw itch ed on. Youc an sw itch
on the icon di splays for more than
one special destinat ion. i
The list shows all icons that are contained in
th e digi tal map across all countries. How ever,
not all the special des tinations are available in all
co un tries. Certain special dest ination icons may
not be display edon thema p, even if the icon dis-
pl ay is swit ched on.
6 To exit the menu: slide om p. Ge
o-coordinate disp lay
Illu strat ion: ma pwi th th ege o-coord inate
di sp lay swi tche d on
1 Curren t height above mean sealevel
2 Numb erofGP S satell ites fr om wh ich
as ign alcancu rrently be rec eived
3 Coordinat edispl ay
i There mustbe sufficien tGPS rec eption for
displa ys1,2 and 3tobe shown. Height dis-
play 1mayvary fro m theac tual va lue, be cause
th e navigat ionsystem uses the GP Ssign al for
th eca lcul at ion.
P6
8.20-5112 -31 216_R
E_2006-12a.book Seit e140 Montag, 2. Oktob er2006 12:06 12

141
COM
AND
CO MAND navigati onsystem *(introduct ion)
Disp lay opt ions wit hgeo- coordin ate
displ ayswi tched on
If th ec ross ha iris displ ayed on themap
vi ew (m apwasmo vedma nually), onlydis-
play 3isvisi bl e. It sh owseitherthe coor-
di na teso f the cros shair or other data on
th ec ross ha irpo siti on, e.g. a stree tna me .
The digita lma pmu stco ntain re levant data
in ord erforthis oth erdat atobe displa yed.
i Ifth ere is no cros shair on themap view,
dis plays 1,2 and 3are visibl e.Display 3
sh ow s th eco ordinat esofthecu rre ntvehicle
position.
Sw itch ingth ege o-c oordin atedi sp lay on
or off
6 Select "Navi" "Navi" "Map dis-
play" .
The map display list appears.
6 Select "Geo-coordinates" .
Th ege o-coordi nate disp layissw itched
on or off ,depending on the prev ious
st at us. A filled square indi cates the
act ive stat us.
6 To exit themenu: slide om p. Selecting the
route ty pe
You can se lect the following route ty pes:
! "Faste stroute" :CO MA ND calcul ates a
route with theshortest pos sibl e (mini-
mised) jou rney time.
! "Dynamic rou te":sam eroute type as
"Faste stroute" .Ho wever, COMA ND
also takes into cons ideration anyR DS-
TMC traff icannou ncem ents1
that are
re ce ived for route guida nce. Thenav i-
gation syste mis th usable to guid eyo u
aroun datra ffic jam, for exam ple. If
aq uick er route isdetermined dueto a
re ceived RDS-TMC tr affic annou nce-
ment, the navi gation systemchanges
th er oute. It will bypass blockages if
po ssible.
! "Short ro ute" : COMA NDcalcul ates a
route with theshortest pos sibl e (mini-
mised) dist ance. 6
Select "Navi" "Nav i" "Mode".
The mod elist appear s. ARdotind i-
ca test he cur rent sett ing.
6 To adj ust:select "Fastes tro ute" or
"D ynamic rout e"or "Shor tro ute" .
6 To exit the menu: slide om p.
i COMA ND calculates a new rou teifyo u
ch an ge th erou te ty pesetting wi throu teguid-
ance active.
If yo uch ange the route type set ting when route
guidance is inac tive ,CO MA ND uses the new set-
ting fort he nextrou teguida nce. 1R
DS-TMC and the"Dynamicro ute" route type are
no t available in all co untrie s. 216_R
E_2006-12a.book Seit e141 Montag, 2. Oktob er2006 12:06 12

144 COM
AND
CO MA ND navigat ionsystem* (en tering a des tinati on) Se
lecti ngthe coun try
i Youcanonly select co untrie sthat ar e stored
on thedigit alma p.
6 Select "Countr y"inthe addr essin put
menu.
The coun try list appears.
6 Select the desired coun try.
The addr essinp utmen uappear sagain.
Th eco un try selected is autom atical ly
en tered. Entering
the town
i Youca n only ent ertowns that are st ored on
th e digi talma p. If youha ve ent ered a postcode
and then ent erato wn nam e,this will dele tethe
postcode.
6 Select "Town" in theaddress in put
menu.
The display shows eith er theto wn list
with input cha racter s or without input
cha racter s (
=page 145).
Wh ether or not the input charac tersare
displayed depe nds on howma ny towns
ar eav ailable for the countr yselec ted. To
wn list with input characters
If th is list appe ars, inpu tcha racters 6are
ac tivated autom atica lly.
1 List entry that mostclose lyma tches
the cur rent inpu tst ring
2 Character entered by th euser
3 Cha racter sau tom atically added by the
system
4 Cha racter s not currently available for
sele ction
5 Cha racter s cur rentlyavailable fors e-
le ct ion
6 Inputcha racters
7 Town list
8 Curre ntly selecte dcharacter i
With inpu tc haract ers6 ,yo uc an only se-
le ct th echa racters that are currently available.
Wh ich th es e are depends on thecu rrent inp ut
string and the data contained onthe di gita lma p.
6 Dur ing th echa racter selec tion proc e-
dure described below, list ent ry1 al-
ways shows atow nthat mostclose ly
ma tche sthe current inp utstr ing.
COMA NDautom atically ad dsplausi ble
charact ers3to cha racter s2 alrea dy
enter ed by th euser.
6 To select a character: slide om por
turn ymz .
6 Toconfirm thech aracter selec tion:
pre ssn.
6 To del ete indiv idualcharac ters: se-
lect )inthe bottom line and press n.
6 To delete an entire entry: select) in
the bottom line and press and holdn
until th eentire entry has bee ndelet ed.
P82.86-5321-31 216_R
E_2006-12a.book Seit e144 Montag, 2. Oktob er2006 12:06 12

146 COM
AND
CO MA ND navigat ionsystem* (en tering a des tinati on)
Postcode list with input cha racters
If th is list ap pears,input charac ters 4 are
ac tivated autom atically.
1 List en try that most closely matches
the cur rentinput string
2 Digits entered bythe user
3 Digits autom atical ly ad de d by the sys-
tem
4 Inpu tcha racters
5 Digits not curre ntly av ailable for selec-
tion
6 Digits curre ntly avai lable for selection
7 Curr ently select ed dig it
8 Postc odelist i
With inpu tch arac ters 4 ,you canon lyse-
lect the di gits that are curr ently available. Which
th ese are depends on thecu rrent input st ring
and the data con tained on the digi talma p.
Dur ing the digit sele ction pr oc edure de-
scribed bel ow, list ent ry1 always shows
a po stc odetha tmo stclos ely mat ches the
cu rrent input str ing. COMAND then auto-
ma tica lly ad ds plausible digits 3to those
already entered by th euser2 , to com-
plete apostc ode.
6 Toselect adi git: slide om por turn
y m z.
6 Toconfirm the di gitse lection: press
n .
6 Todelete in divid ual di gits: select )
in the bottom line and press n.
6 Todelete an en tire entr y:se lect ) in
the bo ttom line and press and holdn
unt ilthe enti reentry has been deleted. 6
Toacce ptthef irst list entry: press
an dho ldn unti lth e addr essinput
menu appear s.
COMA NDhasau tom atical ly ac cepted
the first list entry andenter editin the
address inp utmenu.
6 Tocancel anentry: select"Back" in
the bottom line and press n.
or
6 Press theL back button.
Th ein put character s4 disappear if
COMAND isabl eto unique lyassign the
ch arac ters entered to one postcode. The
list ofpostc odes is sh own wi thou tth ein-
put cha racter s. He reyou can makean oth-
er sele ction.
It is also possibletochang eto the post-
co de list without inp utcharac ters manual-
ly at an y time during digitinpu t.
6 To chan geman ually to the postc ode
li st without input character s: slide
q m .
or
6 Select ?inthe second to bottom li ne
an dpre ssn.
P82.86-5322-31 216_R
E_2006-12a.book Seit e146 Montag, 2. Oktob er2006 12:06 12

148 COM
AND
CO MA ND navigat ionsystem* (en tering a des tinati on) i
Withinput charac ters 6 ,yo uca non lyse-
lect thecharact erstha tare curren tly available.
Wh icht hese are depends on thecu rrent input
string and thedata contained on the digi talmap.
During th echaracter sele ction pro cedu re
described bel ow, list entry 1always
sh ows thero ad name that mos tclose ly
ma tches the current inp utstr ing.
COMAND autom atica llya ddspl au sible
cha racte rs3 to cha racters 2alrea dyen-
tere d by theuser.
6 To se lect a character: slide om por
turn ym z.
6 Toconfirm the character selec tion:
press n.
6 To delet eind ividual character s:se-
lect )inthe bottom line and press n.
6 Todelete an entire ent ry:select )in
the bottom line and press andh old n
un til the entire entr yhasbeen del eted. 6
To ac cept the first list entr y:press
and holdn until the addres sin put
menu appears.
COMA NDhasau tom atical ly ac cepted
the first list entry and ent ered itin the
ad dress input menu.
6 Tocancel an ent ry:sele ct"Back" in
the bo ttom line and press n.
or
6 Press theL back button.
Th einpu tch arac ters 6 disappear if
COMAND isabl eto unique lyassign the
ch arac ters entered to one road. Thelist of
roa dsis sh own without the inp utcharac-
ters. Here yo uca nma ke an othe rse lect ion.
It is also possible to chang etothe roa d.6
To ch ange manually tothe road
na me li st without input character s:
slide qm.
or
6 Select ?inthe second to bottom li ne
an dpre ssn.
Ro ad na melistwithout inpu tcharacters
1 Icon form ore sele ction op tions
6 Toselec ta ro ad: slide qm ror turn
y m z.
6 Tocancel the select ion: select "Back"
an dpre ssn.
or P82.86-5325-31 216_R
E_2006-12a.book Seit e148 Montag, 2. Oktob er2006 12:06 12

149
COM
AND
CO MAND navigation system* (entering adestina tion)
6 Press the Lback button.
6 Toconf irm the selec tion: press n.
If icon 1isdisplayed with the road
na me , this means tha tthe road tra vers-
es mo rethan one part of th etown.
If yo u th enconfirm one of these ro ads,
yo u wil lbetaken to afu rther sub-s elec-
tion.
Th ead dress in putme nuappears again
if no other options ar eavailabl e.
CO MA ND hasac ce pted the selected
st reet and autom atical ly en tered it in
the addres sin put menu. Ent
eringa cent re
i Youcan only ent ercentres that are stored
on thedigital map.
6 Select "Centre" intheaddress input
menu.
The display sho wseither th e cen tre li st
with input cha racters or without inpu t
cha racter s (
=page 150).Whe ther or
not the input cha racter sar ed ispl ay ed
de pends on how many centre sare
avai lable in th etown select ed. Cent
relist wi thinput charact ers
If th is li st ap pears, input charac ters 6are
ac tiva tedau tomat ical ly.
1 List entry th at most closely matches
th ecu rre ntinput string
2 Charac terentered by th euser
3 Charac ters automati cally added by the
syst em
4 Cha racters not cu rrently available for
select ion
5 Charac ters curre ntly avai lable for se-
lect ion
6 Input characters
7 Centre list
8 Curre ntly selected charact er i
Withinput charac ters 6 ,yo uca non lyse-
lect thecharact erst hatare currently available.
Wh icht hese are depends on thecu rrent input
string and thedata contained on the digi talma p.
During th echaracter sele ction pro cedu re
described bel ow, list entry 1always
sh ows ace ntre tha tmo stclos ely matc hes
the cu rrent inpu tst ring. COMA ND auto-
ma tically adds plau sibl e ch aract ers3to
cha racte rs2 alre ad yen tered by th euser.
6 To se lect a character: slide om por
turn ym z.
6 Toconfirm the character selec tion:
press n.
6 To delet eind ividual character s:se-
le ct ) inthe bottom line and pre ssn.
6 Todelete an entire ent ry:select )in
the bottom line and press andh old n
un til the entire entr yhasbeen del eted.
P8
2.86-5326-31 ==216_R
E_2006-12a.book Seit e149 Montag, 2. Oktob er2006 12:06 12

151
COM
AND
CO MAND navigation system* (entering adestina tion)
Ho use numb erlist wi thinpu t ch arac ters
If th is list appe ars, input ch aracters 4are
ac tiv ated automat ically.
1 Digit enter ed bythe user
2 Digits autom atica llya dded bythe sys-
tem
3 List entry that most closely matches
th ec urrent input string
4 Input cha racters
5 Curr ently sele cted digit
6 Digits cur rently availabl ef or selection
7 Digits not currently ava ilablefor sele c-
tion
8 Hou senum berlist i
Withinput charact ers4,yo uca nonly se-
lec t th e digi ts that are currently available. Which
th es e are depends on thecu rrent input string
and the dat acontained on thed igital map.
During th edigit sele ction pr ocedure de-
sc ribed below, list entry 3 alwa ys sh ows
a ho use numb er th atmo stclos ely matches
the cu rrent input string. COMAND th en
au tom atical ly adds plau sible digits 2to
thos ealready entered by th euser1 to
comp lete aho use number.
6 Toselect a di git: slide om por turn
y m z.
6 Toconfirm the digit se lect ion: press
n .
6 Todelete individu aldig its: select )
in the bottom line andpr ess n.
6 Todelete anenti reen try: select )in
the bottom line and press andh old n
un til the entire entry hasb een de leted. 6
To ac cept the first list entry: press
and hold nuntilthea ddress input
menu appears.
COMA NDhasau tom atical ly ac cepted
the firs t list entry an d entered it in the
ad dress input menu.
6 Tocanc elan ent ry:select "Back" in
the bottom line and press n.
or
6 Press theL back button.
The inpu tch arac ters 4 disappe arif
COMAND isab leto uniquely assign the
cha racter senter ed to oneho usenum ber.
Th elist of hou senumbe rsissh own without
the inpu t cha racter s. Here you can make
an other selectio n.
It is also po ssibleto chan ge to thehouse
num berlist without input ch aracters man-
ually atanytime duri ngdigit input.
6 To chan gemanuall yto the house
number list without in putcharac-
ter s:slide qm .
or
6 Select ?in the second to bottom line
an d press n.
P8
2.86-5328-31 216_
RE_2006-12a.book Seit e151 Montag, 2. Oktob er2006 12:06 12

154 COM
AND
CO MA ND navigat ionsystem* (en tering a des tinati on)
6 Toconfirm the selec tion: press n.
Af ter yo uhav eco nfirme dyo ur selec-
tion, the address input menu appea rs
again. COMA ND has accept edthe se-
le cted junction andau tom atically en-
tered itin the address input menu. Sta
rtin g route calcul at ion
i Youcannot start rou te calculation unt ilall
th e necessary address dat aha s been ent ered.
6 Select "Start"after you ha veenter ed
the destinat ion.
Ro uteca lculat ion wi ll start if route
guidan ce hasnot alrea dybee nac tiva t-
ed.
If rou teguidanc eha sal ready been
ac tiva ted, apro mptwil lappear asking
whet her you wis hto endth ecu rrent
rou teguidanc e. 6
Select "Ye s"or "No" .
If yo uselect "Yes",CO MA ND willst op
ro utegu idanc eand star tro utecalcu la-
tion for the new destination.
If yo usele ct"No" , COM ANDw illco ntin-
ue with the active route guid ance.
Wh ileroute calc ulat ion is in pro gres s,
an ar row will indic ate th edi re ction to
yo ur desti nation. Belo wthis ,yo uw ill
see them essage "Calcu lating route" .
On ce the ro uteha sbeen calc ulat ed,
route guida ncebegins (
=page 167).
i Rout eca lcul ation takes a certain amount
of time. Thetime depends on the distance from
th e destination ,for example. CO MAND calcu-
la te sth erou teusing th edigital map data. The
calc ulat ed route maydif fer from theactual road
sit uation, e.g. due toroad works or incomple te
ma p data. Pleas ema kesure that you obser ve
th enote sab ou tth edigital map (
=page 129). 6
Select "Navi""Destination" "From
memory" .
Th edisp lay sho wseith er thede stina-
tion memo ry list with inp utcharac ters
or witho utinput charac ters
( = page 156). Wheth eror not the input
ch arac ters are disp layeddep ends on
th en umber ofen tries in thed estina tion
memor y.
i The des tination memory always contains
an entry named "O wnaddress ".Yo uma yw ish to
assig nyou rhom e address tothis en try, for ex-
ample ( =page 181). Li keanyot he r ent ry,the
"Own address "entry canbe selec ted using input
ch arac ters or from thebeginning of a lis t.This
entry alway sappears at the top ofthe li st. En
terin gadesti nation from the
de stinat ionme mory 216_R
E_2006-12a.book Seit e154 Montag, 2. Oktob er2006 12:06 12